[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Duplicity-talk] Errors when trying to install Duplicity
|
From: |
ryan |
|
Subject: |
Re: [Duplicity-talk] Errors when trying to install Duplicity |
|
Date: |
Thu, 22 Nov 2007 12:14:34 -0800 |
|
User-agent: |
Thunderbird 1.5.0.12 (X11/20070604) |
Sure thing.
Chandrika Ganesh Giridhar Rajaram wrote:
> And with that I was SUCCESSFULLY able to install duplicity. Thanks
> Ryan!!!
>
> On Nov 22, 2007 12:05 PM, Chandrika Ganesh Giridhar Rajaram
> <address@hidden <mailto:address@hidden>> wrote:
>
> I just removed emails from whole.h and its building now. THey
> should have been commented out.
>
>
> On Nov 22, 2007 11:59 AM, Chandrika Ganesh Giridhar Rajaram <
> address@hidden <mailto:address@hidden>>
> wrote:
>
>
>
> On Nov 22, 2007 11:55 AM, ryan <address@hidden
> <mailto:address@hidden>> wrote:
>
>
>
> Chandrika Ganesh Giridhar Rajaram wrote:
> > Ah thanks. I also have that
> >
> > /usr/local/librsync-0.9.7
> > ls
> > autogen.sh command.c configure.msc fileutil.c
> > job.h Makefile.am <http://Makefile.am>
> <http://Makefile.am> mksum.c
> > popt README.CVS search.h sumset.h types.h
> > base64.c command.h COPYING fileutil.h
> > librsync-config.h Makefile.in <http://Makefile.in> <
> http://Makefile.in> msg.c
> > protocol.h README.RPM snprintf.c testsuite util.c
> > buf.c config.guess delta.c hex.c
> > librsync-config.h.in <http://librsync-config.h.in>
> <http://librsync-config.h.in> mdfour.c
> > netint.c prototab.c readsums.c snprintf.h THANKS
> util.h
> > buf.h config.h.in <http://config.h.in>
> <http://config.h.in> depcomp
> > install-sh librsync.h mdfour.h netint.h
> > prototab.h rollsum.c stats.c TODO version.c
> > ChangeLog config.sub doc isprefix.c
> > librsync.spec missing NEWS rdiff.c
> > rollsum.h stream.c trace.c whole.c
> > checksum.c configure emit.c isprefix.h
> > libversions.txt mkinstalldirs patch.c rdiff.magic
> > scoop.c stream.h trace.h whole.h
> > checksum.h configure.ac <http://configure.ac>
> <http://configure.ac> emit.h
> > job.c ltmain.sh mkprototab.pl PCbuild
> > README search.c sumset.c tube.c
> >
> > Still no luck.
> >
> > On Nov 22, 2007 11:27 AM, ryan < address@hidden
> <mailto:address@hidden>
> > <mailto:address@hidden
> <mailto:address@hidden>>> wrote:
> >
> >
> >
> > Chandrika Ganesh Giridhar Rajaram wrote:
> >> I am trying to install duplicity. I got all the other
> >> requirements from this page and installed them all.
> Here is the
> >> error message:
> >>
> >> I am using CentOS. Any help is GREATLY appreciated.
> >>
> >> python setup.py install
> >> Warning: pexpect version 2.1 or greater is required
> for the ssh
> >> backend.
> >> If you do not plan to use the ssh backend,
> this is not a
> >> problem.
> >> running install
> >> running build
> >> running build_py
> >> running build_ext
> >> building 'duplicity._librsync' extension
> >> gcc -pthread -fno-strict-aliasing -DNDEBUG -O2 -g
> -pipe -Wall
> >> -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector
> >> --param=ssp-buffer-size=4 -m32 -march=i386
> -mtune=generic
> >> -fasynchronous-unwind-tables -D_GNU_SOURCE -fPIC -fPIC
> >> -I/usr/include/python2.4 -c _librsyncmodule.c -o
> >> build/temp.linux- i686-2.4/_librsyncmodule.o
> >> _librsyncmodule.c:25:23: error: librsync.h: No such
> file or directory
> >> _librsyncmodule.c:32: error: expected ')' before
> 'result'
> >> _librsyncmodule.c:46: error: expected
> specifier-qualifier-list
> >> before 'rs_job_t'
> >> _librsyncmodule.c: In function
> '_librsync_new_sigmaker':
> >> _librsyncmodule.c:62: error:
> '_librsync_SigMakerObject' has no
> >> member named 'sig_job'
> >> _librsyncmodule.c:62: warning: implicit declaration
> of function
> >> 'rs_sig_begin'
> >> _librsyncmodule.c:63: error:
> 'RS_DEFAULT_STRONG_LEN' undeclared
> >> (first use in this function)
> >> _librsyncmodule.c:63: error: (Each undeclared
> identifier is
> >> reported only once
> >> _librsyncmodule.c:63: error: for each function it
> appears in.)
> >> _librsyncmodule.c: In function
> '_librsync_sigmaker_dealloc':
> >> _librsyncmodule.c:70: warning: implicit declaration
> of function
> >> 'rs_job_free'
> >> _librsyncmodule.c:70: error:
> '_librsync_SigMakerObject' has no
> >> member named 'sig_job'
> >> _librsyncmodule.c: In function
> '_librsync_sigmaker_cycle':
> >> _librsyncmodule.c:84: error: 'rs_buffers_t'
> undeclared (first use
> >> in this function)
> >> _librsyncmodule.c:84: error: expected ';' before 'buf'
> >> _librsyncmodule.c:85: error: 'rs_result' undeclared
> (first use in
> >> this function)
> >> _librsyncmodule.c:85: error: expected ';' before
> 'result'
> >> _librsyncmodule.c:90: error: 'buf' undeclared
> (first use in this
> >> function)
> >> _librsyncmodule.c:96: error: 'result' undeclared
> (first use in
> >> this function)
> >> _librsyncmodule.c:96: warning: implicit declaration
> of function
> >> 'rs_job_iter'
> >> _librsyncmodule.c:96: error:
> '_librsync_SigMakerObject' has no
> >> member named 'sig_job'
> >> _librsyncmodule.c:98: error: 'RS_DONE' undeclared
> (first use in
> >> this function)
> >> _librsyncmodule.c:98: error: 'RS_BLOCKED'
> undeclared (first use
> >> in this function)
> >> _librsyncmodule.c:99: warning: implicit declaration
> of function
> >> '_librsync_seterror'
> >> _librsyncmodule.c: At top level:
> >> _librsyncmodule.c:171: error: expected
> specifier-qualifier-list
> >> before 'rs_job_t'
> >> _librsyncmodule.c: In function
> '_librsync_new_deltamaker':
> >> _librsyncmodule.c:182: error: 'rs_job_t' undeclared
> (first use in
> >> this function)
> >> _librsyncmodule.c:182: error: 'sig_loader'
> undeclared (first use
> >> in this function)
> >> _librsyncmodule.c:183: error: 'rs_signature_t'
> undeclared (first
> >> use in this function)
> >> _librsyncmodule.c:183: error: 'sig_ptr' undeclared
> (first use in
> >> this function)
> >> _librsyncmodule.c:184: error: 'rs_buffers_t'
> undeclared (first
> >> use in this function)
> >> _librsyncmodule.c:184: error: expected ';' before 'buf'
> >> _librsyncmodule.c:185: error: 'rs_result'
> undeclared (first use
> >> in this function)
> >> _librsyncmodule.c:185: error: expected ';' before
> 'result'
> >> _librsyncmodule.c:195: warning: implicit
> declaration of function
> >> 'rs_loadsig_begin'
> >> _librsyncmodule.c:196: error: 'buf' undeclared
> (first use in this
> >> function)
> >> _librsyncmodule.c:201: error: 'result' undeclared
> (first use in
> >> this function)
> >> _librsyncmodule.c:203: error: 'RS_DONE' undeclared
> (first use in
> >> this function)
> >> _librsyncmodule.c:207: warning: implicit
> declaration of function
> >> 'rs_build_hash_table'
> >> _librsyncmodule.c:212: error:
> '_librsync_DeltaMakerObject' has no
> >> member named 'sig_ptr'
> >> _librsyncmodule.c:213: error:
> '_librsync_DeltaMakerObject' has no
> >> member named 'delta_job'
> >> _librsyncmodule.c:213: warning: implicit
> declaration of function
> >> 'rs_delta_begin'
> >> _librsyncmodule.c: In function
> '_librsync_deltamaker_dealloc':
> >> _librsyncmodule.c:221: error: 'rs_signature_t'
> undeclared (first
> >> use in this function)
> >> _librsyncmodule.c:221: error: 'sig_ptr' undeclared
> (first use in
> >> this function)
> >> _librsyncmodule.c:221: error:
> '_librsync_DeltaMakerObject' has no
> >> member named 'sig_ptr'
> >> _librsyncmodule.c:223: warning: implicit
> declaration of function
> >> 'rs_free_sumset'
> >> _librsyncmodule.c:224: error:
> '_librsync_DeltaMakerObject' has no
> >> member named 'delta_job'
> >> _librsyncmodule.c: In function
> '_librsync_deltamaker_cycle':
> >> _librsyncmodule.c:238: error: 'rs_buffers_t'
> undeclared (first
> >> use in this function)
> >> _librsyncmodule.c:238: error: expected ';' before 'buf'
> >> _librsyncmodule.c:239: error: 'rs_result'
> undeclared (first use
> >> in this function)
> >> _librsyncmodule.c:239: error: expected ';' before
> 'result'
> >> _librsyncmodule.c:244: error: 'buf' undeclared
> (first use in this
> >> function)
> >> _librsyncmodule.c:250: error: 'result' undeclared
> (first use in
> >> this function)
> >> _librsyncmodule.c:250: error:
> '_librsync_DeltaMakerObject' has no
> >> member named 'delta_job'
> >> _librsyncmodule.c:251: error: 'RS_DONE' undeclared
> (first use in
> >> this function)
> >> _librsyncmodule.c:251: error: 'RS_BLOCKED'
> undeclared (first use
> >> in this function)
> >> _librsyncmodule.c: At top level:
> >> _librsyncmodule.c:324: error: expected
> specifier-qualifier-list
> >> before 'rs_job_t'
> >> _librsyncmodule.c: In function
> '_librsync_new_patchmaker':
> >> _librsyncmodule.c:348: error:
> '_librsync_PatchMakerObject' has no
> >> member named 'basis_file'
> >> _librsyncmodule.c:350: error:
> '_librsync_PatchMakerObject' has no
> >> member named 'patch_job'
> >> _librsyncmodule.c:350: warning: implicit
> declaration of function
> >> 'rs_patch_begin'
> >> _librsyncmodule.c:350: error: 'rs_file_copy_cb'
> undeclared (first
> >> use in this function)
> >> _librsyncmodule.c: In function
> '_librsync_patchmaker_dealloc':
> >> _librsyncmodule.c:359: error:
> '_librsync_PatchMakerObject' has no
> >> member named 'basis_file'
> >> _librsyncmodule.c:359: error:
> '_librsync_PatchMakerObject' has no
> >> member named 'basis_file'
> >> _librsyncmodule.c:359: error:
> '_librsync_PatchMakerObject' has no
> >> member named 'basis_file'
> >> _librsyncmodule.c:360: error:
> '_librsync_PatchMakerObject' has no
> >> member named 'patch_job'
> >> _librsyncmodule.c: In function
> '_librsync_patchmaker_cycle':
> >> _librsyncmodule.c:374: error: 'rs_buffers_t'
> undeclared (first
> >> use in this function)
> >> _librsyncmodule.c:374: error: expected ';' before 'buf'
> >> _librsyncmodule.c:375: error: 'rs_result'
> undeclared (first use
> >> in this function)
> >> _librsyncmodule.c:375: error: expected ';' before
> 'result'
> >> _librsyncmodule.c:380: error: 'buf' undeclared
> (first use in this
> >> function)
> >> _librsyncmodule.c:386: error: 'result' undeclared
> (first use in
> >> this function)
> >> _librsyncmodule.c:386: error:
> '_librsync_PatchMakerObject' has no
> >> member named 'patch_job'
> >> _librsyncmodule.c:387: error: 'RS_DONE' undeclared
> (first use in
> >> this function)
> >> _librsyncmodule.c:387: error: 'RS_BLOCKED'
> undeclared (first use
> >> in this function)
> >> _librsyncmodule.c: In function 'init_librsync':
> >> _librsyncmodule.c:477: error:
> 'RS_DEFAULT_BLOCK_LEN' undeclared
> >> (first use in this function)
> >> error: command 'gcc' failed with exit status 1
> >>
> >>
>
> ------------------------------------------------------------------------
> >> _______________________________________________
> Duplicity-talk
> >> mailing list address@hidden
> <mailto:address@hidden>
> >> <mailto:address@hidden
> <mailto:address@hidden>>
> >> http://lists.nongnu.org/mailman/listinfo/duplicity-talk
> >
> > Oops, I'm sorry - you will need my earlier
> suggestion for ssh but
> > most of your errors look like they are due to not having
> > librsync-devel installed. You need the development
> libraries for
> > rsync to compile software that uses it.
> >
> > Hope that helps,
> > Ryan
> >
> > _______________________________________________
> > Duplicity-talk mailing list
> > address@hidden
> <mailto:address@hidden>
> <mailto:address@hidden
> <mailto:address@hidden>>
> > http://lists.nongnu.org/mailman/listinfo/duplicity-talk
> >
> >
> >
>
> ------------------------------------------------------------------------
>
> >
> > _______________________________________________
> > Duplicity-talk mailing list
> > address@hidden <mailto:address@hidden>
> > http://lists.nongnu.org/mailman/listinfo/duplicity-talk
> >
> looks to me like you didn't actually build librsync and
> just put it in
> /usr/local. Is that the case? If so, go to that directory, do
>
> configure
> make all check
> make install
>
> Thx. I get errrors when trying to do make all check
> In file included from whole.c:51:
> whole.h:1: error: expected '=', ',', ';', 'asm' or
> '__attribute__' before 'Pool'
> whole.h:1: error: stray '@' in program
> whole.h:2: error: stray '@' in program
> whole.h:3: error: stray '@' in program
> whole.c:69: warning: no previous prototype for 'rs_whole_run'
> make[2]: *** [whole.lo] Error 1
> make[2]: Leaving directory `/usr/local/librsync-0.9.7'
> make[1]: *** [all-recursive] Error 1
> make[1]: Leaving directory `/usr/local/librsync-0.9.7'
> make: *** [all] Error 2
>
>
>
> Ryan
>
>
> _______________________________________________
> Duplicity-talk mailing list
> address@hidden <mailto:address@hidden>
> http://lists.nongnu.org/mailman/listinfo/duplicity-talk
> <http://lists.nongnu.org/mailman/listinfo/duplicity-talk>
>
>
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> Duplicity-talk mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/duplicity-talk
>