[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Duplicity-talk] Using -z option in ncftpput
From: |
Pascal Levasseur |
Subject: |
[Duplicity-talk] Using -z option in ncftpput |
Date: |
Thu, 21 May 2009 10:23:06 +0200 |
Hello all,
I would like to know if I can use the -z option (resume transfert) in
the ncftpput command used by Duplicity without any bad side effect(s) ?
I have patched the Python code of Duplicity 0.5.17 (ftpbackend.py) to
add this option and the option is displayed on the terminal output of
Duplicity :
Running 'ncftpput
-f /home/pascal/tmp/duplicity-Ker_ko-tempdir/mkstemp--d1vOQ-1 -F -t 30
-o useCLNT=0,useHELP_SITE=0 -m -z -V -C
'/home/pascal/tmp/duplicity-Ker_ko-tempdir/mktemp-SR4wV0-10'
'duplicity-full.20090521T072837Z.vol7.difftar.gpg'' (attempt #1)
By the way I have not used wireshark to be sure that ncftpput and the
ftp server really agree to resume the tranfert...
Since few weeks I have a very unstable ADSL link and Duplicity takes
forever due to a lot of retry, so I try to mitigate this by using the -z
option.
Thanks for your advices.
Pascal Levasseur
- [Duplicity-talk] Using -z option in ncftpput,
Pascal Levasseur <=