[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Dvdrtools-users] mkudffs help
From: |
Chris Ditri |
Subject: |
Re: [Dvdrtools-users] mkudffs help |
Date: |
Mon, 23 Sep 2002 14:28:54 -0400 |
User-agent: |
KMail/1.4.1 |
Ummm........ no.
And, of course, that was it! It compiled up all nicely. I am not sure if I
needed to recompile the whole kernel, or just the modules -- but just to be
safe, I recompiled the whole kernel.
Thank you for your help, Mal.
So Udf seems to be working so far on DVD+RW media. It doesn't, however, seem
to work at all on cdrw media (at least in this drive). It gives me the exact
same output: trying to change type of multiple extents.
I am not sure what is going on there...
If anyone has any thoughts on this, I would love to hear them.
Thanks so much for your help.
Chris
On Monday 23 September 2002 11:14 am, you wrote:
> Have you gone into 'Code maturity level options' at the top of the
> menuconfig, and checked 'Prompt for development and/or incomplete
> code/drivers' ?
>
> MAL
>
> On Mon, 2002-09-23 at 15:23, Chris Ditri wrote:
> > Hello. I have read the documentation at
> > http://fy.chalmers.se/~appro/linux/DVD+RW/ about a dozen times now. I
> > have looked at source-forge, and lurked all aroun google, and cannot find
> > an answer to this!
> >
> > I tried what Andrew said: mkudffs --spartable=2 --media-type=cdrw
> > /dev/scd0 And I get this: trying to change type of
> > multiple extents
> >
> > The cdrom never even spins up!
> >
> > I have kernel 2.4.19. I have the udf.o module compiled, but I am not
> > certain if it is done right! I cannot find this *anywhere*.
> >
> > I used make menuconfig, and the udf module says it is "read only". The
> > "help" for that module says to turn on the next option for UDF write --
> > Well there is no next option!!! The next option under "FileSystems" is
> > UFS!
> >
> > I tired a make xconfig, and now, I see the option with (Dangerous) next
> > to it, but it is dimmed out! It won't let me click it!.
> >
> > So... I tried to edit .config by hand... and added this:
> > CONFIG_UDF_RW=m. That didn't seem to do anything, so I tried
> > CONFIG_UDF_RW=y... likewise that didn't change anything. ---Am I even on
> > the right track here? I tried compiling it from udf-0.9.6, and it tells
> > me that 2.4.x kernels already have support for it!
> >
> > I bound /dev/raw/raw1 to /dev/scd0, as Andrew suggests... I compiled the
> > latest UDF tools... I fed the goldfish, and remembered to water the
> > plants....
> >
> > *Something* is definitely wrong. Is it that the module for udf writing
> > is not there, or is my syntax wrong... what?????
> >
> > PLEASE HELP!
> >
> > My System: 2.0 ghz xeon processor
> > 256 megs ram
> > RedHat 7.3
> > Hewlett packard dvd200xi (yes, a second generation
> > dvd+r[w] unit)
> > Maxell CD-RW74 650 Megabyte Media (brand new)
> >
> > Thank you.
> >
> >
> > Chris
> >
> > P.S. If there is a better place to post this message, I would love to
> > here it. I apologize if it is in the wrong list.
> >
> >
> > _______________________________________________
> > Dvdrtools-users mailing list
> > address@hidden
> > http://mail.freesoftware.fsf.org/mailman/listinfo/dvdrtools-users