[Dvdrtools-users] Pioneer DVR-104 Problems

[Mike McLean]

Hi,

I've been having problems getting my Pioneer DVR-104 drive to work with
dvdrecord.  I have DMA disabled as suggested and I get the following:

bird media # dvdrecord dev=0,1,0 -v -pad -eject -dao speed=2
/usr.bak/media/macgyver.isodvdrtools v0.1.3
Portions (c) 2002-2003 Ark Linux <address@hidden>
Based on:
Cdrecord 1.11a15 (i686-pc-linux-gnu) Copyright (C) 1995-2001 Jörg
Schilling
TOC Type: 1 = CD-ROM
scsidev: '0,1,0'
scsibus: 0 target: 1 lun: 0
Linux sg driver version: 3.1.24
Using libscg version 'schily-0.5'
atapi: 1
Device type    : Removable CD-ROM
Version        : 0
Response Format: 2
Capabilities   :
Vendor_info    : 'PIONEER '
Identifikation : 'DVD-RW  DVR-104 '
Revision       : '1.32'
Device seems to be: Generic mmc2 DVD.
Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd).
Driver flags   : SWABAUDIO BURNFREE
Supported modes: PACKET SAO
Drive buf size : 1638400 = 1600 KB
FIFO size      : 4194304 = 4096 KB
Track 01: data  899 MB         padsize:  30 KB
Total size:     1033 MB (102:23.46) = 460760 sectors
Lout start:     1033 MB (102:25/35) = 460760 sectors
Current Secsize: 2048
  ATIP start of lead in:  -150 (00:00/00)
Disk type:    unknown
Manuf. index: -1
Manufacturer: unknown (not in table)
Blocks total: 2298496 Blocks current: 2298496 Blocks remaining: 1837736
Starting to write CD/DVD at speed 1 in write mode for single session.
Last chance to quit, starting real write in 0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
trackno=0
BURN-Free is ON.
Performing OPC...
dvdrecord: Input/output error. send opc: scsi sendcmd: no error
CDB:  54 01 00 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 03 00 00 00 00 0E 00 00 00 00 73 03 00 00
Sense Key: 0x3 Medium Error, Segment 0
Sense Code: 0x73 Qual 0x03 (power calibration area error) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 10.145s timeout 200s
dvdrecord: OPC failed.
dvdrecord: fifo had 64 puts and 0 gets.
dvdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.


Any help is appreciated.

Mike

 

PS: I"ve tried sending this twice already, but it doesn't seem to have gotten through, so I'm sorry if I've spammed.