Re: "nmake info" Windows patch

[Peter 'Luna' Runestig]

"Peter 'Luna' Runestig" <address@hidden> writes:
> Here is another thing I mentioned on bug-gnu-emacs some time ago. This
> patch that adds the `info' target to the Windows build. Tested with
> MSVC6/CygWin 1.3.20.
> ftp://ftp.runestig.com/pub/emacs/emacs-20030219-makeinfo.patch
> http://ftp.runestig.com/pub/emacs/emacs-20030219-makeinfo.patch

By request, I'm actually posting the patch here. I take it it's the
preferred way in this forum then. You never now, sometimes people bitch
over a sig > four lines...

diff -burN emacs-20030219.orig/lispintro/makefile.w32-in 
emacs-20030219/lispintro/makefile.w32-in
--- emacs-20030219.orig/lispintro/makefile.w32-in       1970-01-01 
01:00:00.000000000 +0100
+++ emacs-20030219/lispintro/makefile.w32-in    2003-02-21 21:23:01.000000000 
+0100
@@ -0,0 +1,70 @@
+#### Makefile for the Emacs Lisp Introduction manual
+
+# Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
+
+# This file is part of GNU Emacs.
+
+# GNU Emacs is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# GNU Emacs is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with GNU Emacs; see the file COPYING.  If not, write to
+# the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+# Boston, MA 02111-1307, USA.
+
+SHELL = cmd
+
+srcdir = .
+
+infodir = $(srcdir)/../info
+
+INFO_SOURCES = $(srcdir)/emacs-lisp-intro.texi
+# The file name eintr must fit within 5 characters, to allow for
+# -NN extensions to fit into DOS 8+3 limits without clashing
+INFO_TARGETS = $(infodir)/eintr
+DVI_TARGETS = emacs-lisp-intro.dvi
+
+MAKEINFO = makeinfo
+TEXI2DVI = texi2dvi
+DVIPS = dvips
+ENVADD = TEXINPUTS="$(srcdir):$(TEXINPUTS)" MAKEINFO="$(MAKEINFO) -I$(srcdir)"
+
+.SUFFIXES: .dvi .ps .texi
+
+info: $(INFO_TARGETS)
+
+dvi: $(DVI_TARGETS)
+
+$(infodir)/eintr: $(INFO_SOURCES)
+       $(MAKEINFO) -o $@ $(srcdir)/emacs-lisp-intro.texi
+
+emacs-lisp-intro.dvi: $(INFO_SOURCES)
+       $(ENVADD) $(TEXI2DVI) $(srcdir)/emacs-lisp-intro.texi
+
+emacs-lisp-intro.html: $(INFO_SOURCES)
+       $(MAKEINFO) --html -o $@ $(srcdir)/emacs-lisp-intro.texi
+
+.dvi.ps:
+       $(DVIPS) $< -o $@
+
+mostlyclean:
+       rm -f  *.log *.cp *.fn *.ky *.pg *.vr *.tp
+
+clean: mostlyclean
+       rm -f *.dvi
+
+distclean: clean
+
+maintainer-clean: distclean
+       rm -f *.aux *.cps *.fns *.kys *.pgs *.vrs *.toc
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff -burN emacs-20030219.orig/lispref/makefile.w32-in 
emacs-20030219/lispref/makefile.w32-in
--- emacs-20030219.orig/lispref/makefile.w32-in 1970-01-01 01:00:00.000000000 
+0100
+++ emacs-20030219/lispref/makefile.w32-in      2003-02-21 21:23:01.000000000 
+0100
@@ -0,0 +1,160 @@
+# Makefile for the GNU Emacs Lisp Reference Manual.
+
+# Copyright (C) 1990,1991,1992,1993,1994,1995,1996,1998,1999,2000,2001
+#  Free Software Foundation, Inc.
+
+# This file is part of GNU Emacs.
+
+# GNU Emacs is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# GNU Emacs is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with GNU Emacs; see the file COPYING.  If not, write to
+# the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+# Boston, MA 02111-1307, USA.
+
+# Standard configure variables.
+srcdir = .
+
+infodir = $(srcdir)/../info
+
+# Redefine `TEX' if `tex' does not invoke plain TeX.  For example:
+# TEX=platex
+TEX=tex
+SHELL=cmd
+INSTALL_INFO = install-info
+MAKEINFO = makeinfo
+
+# The environment variable and its value to add $(srcdir) to the path
+# searched for TeX input files.
+texinputdir = TEXINPUTS=$(srcdir):"$(TEXINPUTS)"
+
+# The name of the manual:
+VERSION=2.9
+manual = elisp-manual-21-$(VERSION)
+
+# Uncomment this line for permuted index.
+# permuted_index = 1 
+
+# List of all the texinfo files in the manual:
+
+srcs = \
+  $(srcdir)/abbrevs.texi \
+  $(srcdir)/advice.texi \
+  $(srcdir)/anti.texi \
+  $(srcdir)/back.texi \
+  $(srcdir)/backups.texi \
+  $(srcdir)/buffers.texi \
+  $(srcdir)/calendar.texi \
+  $(srcdir)/commands.texi \
+  $(srcdir)/compile.texi \
+  $(srcdir)/control.texi \
+  $(srcdir)/customize.texi \
+  $(srcdir)/debugging.texi \
+  $(srcdir)/display.texi \
+  $(srcdir)/edebug.texi \
+  $(srcdir)/elisp.texi \
+  $(srcdir)/errors.texi \
+  $(srcdir)/eval.texi \
+  $(srcdir)/files.texi \
+  $(srcdir)/frames.texi \
+  $(srcdir)/functions.texi \
+  $(srcdir)/hash.texi \
+  $(srcdir)/help.texi \
+  $(srcdir)/hooks.texi \
+  $(srcdir)/internals.texi \
+  $(srcdir)/intro.texi \
+  $(srcdir)/keymaps.texi \
+  $(srcdir)/lists.texi \
+  $(srcdir)/loading.texi \
+  $(srcdir)/locals.texi \
+  $(srcdir)/macros.texi \
+  $(srcdir)/maps.texi \
+  $(srcdir)/markers.texi \
+  $(srcdir)/minibuf.texi \
+  $(srcdir)/modes.texi \
+  $(srcdir)/nonascii.texi \
+  $(srcdir)/numbers.texi \
+  $(srcdir)/objects.texi \
+  $(srcdir)/os.texi \
+  $(srcdir)/positions.texi \
+  $(srcdir)/processes.texi \
+  $(srcdir)/searching.texi \
+  $(srcdir)/sequences.texi \
+  $(srcdir)/streams.texi \
+  $(srcdir)/strings.texi \
+  $(srcdir)/symbols.texi \
+  $(srcdir)/syntax.texi \
+  $(srcdir)/text.texi \
+  $(srcdir)/tips.texi \
+  $(srcdir)/variables.texi \
+  $(srcdir)/windows.texi \
+  $(srcdir)/index.unperm \
+  $(srcdir)/index.perm \
+  $(srcdir)/gpl.texi \
+  $(srcdir)/doclicense.texi
+
+
+.PHONY: clean
+
+# The info file is named `elisp'.
+info: $(infodir)/elisp
+
+$(infodir)/elisp: $(srcs) index.texi
+       $(MAKEINFO) -I. -I$(srcdir) $(srcdir)/elisp.texi -o $(infodir)/elisp
+
+elisp.dvi: $(srcs) index.texi
+       # Avoid losing old contents of aux file entirely.
+       -mv elisp.aux elisp.oaux
+       # First shot to define xrefs.
+       $(texinputdir) $(TEX) $(srcdir)/elisp.texi
+       if [ a$(permuted_index) != a ]; \
+       then \
+         $(srcdir)/permute-index; \
+         mv permuted.fns elisp.fns; \
+         texindex elisp.tp; \
+       else \
+         texindex elisp.??; \
+       fi
+       $(texinputdir) $(TEX) $(srcdir)/elisp.texi
+
+index.texi:
+         cp $(srcdir)/index.unperm index.texi
+
+install: elisp
+       $(srcdir)/mkinstalldirs $(infodir)
+       cp elisp elisp-* $(infodir)
+       $(INSTALL_INFO) --info-dir=$(infodir) $(infodir)/elisp
+
+clean:
+       rm -f *.toc *.aux *.log *.cp *.cps *.fn *.fns *.tp *.tps \
+              *.vr *.vrs *.pg *.pgs *.ky *.kys
+       rm -f make.out core 
+       rm -f index.texi
+
+distclean: clean
+
+maintainer-clean: clean
+       rm -f elisp elisp-* elisp.dvi elisp.oaux
+
+dist: elisp elisp.dvi
+       -rm -rf temp
+       -mkdir temp
+       -mkdir temp/$(manual)
+       -ln $(srcdir)/README $(srcdir)/configure.in $(srcdir)/configure \
+ $(srcdir)/Makefile.in $(srcdir)/permute-index $(srcs) \
+ $(srcdir)/../man/texinfo.tex \
+ elisp.dvi elisp.aux elisp.??s elisp elisp-[0-9] elisp-[0-9][0-9] \
+ temp/$(manual)
+       -(cd temp/$(manual); rm -f mkinstalldirs)
+       cp $(srcdir)/mkinstalldirs temp/$(manual)
+       (cd temp/$(manual); rm -f *~)
+       (cd temp; tar chf - $(manual)) | gzip > $(manual).tar.gz
+       -rm -rf temp
diff -burN emacs-20030219.orig/man/makefile.w32-in 
emacs-20030219/man/makefile.w32-in
--- emacs-20030219.orig/man/makefile.w32-in     1970-01-01 01:00:00.000000000 
+0100
+++ emacs-20030219/man/makefile.w32-in  2003-02-21 21:09:42.000000000 +0100
@@ -0,0 +1,295 @@
+#### Makefile for the Emacs Manual and other documentation.
+
+# Copyright (C) 1994, 1996, 1997, 1998, 1999, 2000, 2001
+#  Free Software Foundation, Inc.
+
+# This file is part of GNU Emacs.
+
+# GNU Emacs is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# GNU Emacs is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with GNU Emacs; see the file COPYING.  If not, write to
+# the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+# Boston, MA 02111-1307, USA.
+
+# Where to find the source code.  The source code for Emacs's C kernel is
+# expected to be in ${srcdir}/src, and the source code for Emacs's
+# utility programs is expected to be in ${srcdir}/lib-src.  This is
+# set by the configure script's `--srcdir' option.
+srcdir=.
+
+
+# The makeinfo program is part of the Texinfo distribution.
+MAKEINFO = makeinfo
+INFO_TARGETS = ../info/emacs ../info/ccmode ../info/cl \
+               ../info/dired-x ../info/ediff ../info/forms ../info/gnus \
+               ../info/info ../info/message ../info/mh-e ../info/reftex \
+               ../info/sc ../info/vip ../info/viper ../info/widget \
+               ../info/efaq ../info/ada-mode ../info/autotype ../info/calc \
+               ../info/idlwave ../info/eudc ../info/ebrowse ../info/pcl-cvs \
+               ../info/woman ../info/emacs-mime ../info/eshell \
+               ../info/speedbar ../info/tramp ../info/ses
+DVI_TARGETS =  emacs.dvi calc.dvi cc-mode.dvi cl.dvi dired-x.dvi \
+                ediff.dvi forms.dvi gnus.dvi message.dvi mh-e.dvi \
+                reftex.dvi sc.dvi vip.dvi viper.dvi widget.dvi faq.dvi \
+                ada-mode.dvi autotype.dvi idlwave.dvi eudc.dvi ebrowse.dvi \
+                pcl-cvs.dvi woman.dvi emacs-mime.dvi eshell.dvi \
+                speedbar.dvi tramp.dvi ses.dvi
+INFOSOURCES = info.texi
+
+# The following rule does not work with all versions of `make'.
+.SUFFIXES: .texi .dvi
+.texi.dvi:
+       texi2dvi $<
+
+TEXI2DVI = texi2dvi
+ENVADD = TEXINPUTS="$(srcdir):$(TEXINPUTS)" MAKEINFO="$(MAKEINFO) -I$(srcdir)" 
+
+EMACSSOURCES= \
+       $(srcdir)/emacs.texi \
+       $(srcdir)/doclicense.texi \
+       $(srcdir)/screen.texi \
+       $(srcdir)/commands.texi \
+       $(srcdir)/entering.texi \
+       $(srcdir)/basic.texi \
+       $(srcdir)/mini.texi \
+       $(srcdir)/m-x.texi \
+       $(srcdir)/help.texi \
+       $(srcdir)/mark.texi \
+       $(srcdir)/killing.texi \
+       $(srcdir)/regs.texi \
+       $(srcdir)/display.texi \
+       $(srcdir)/search.texi \
+       $(srcdir)/fixit.texi \
+       $(srcdir)/files.texi \
+       $(srcdir)/buffers.texi \
+       $(srcdir)/windows.texi \
+       $(srcdir)/frames.texi \
+       $(srcdir)/mule.texi \
+       $(srcdir)/major.texi \
+       $(srcdir)/indent.texi \
+       $(srcdir)/text.texi \
+       $(srcdir)/programs.texi \
+       $(srcdir)/building.texi \
+       $(srcdir)/maintaining.texi \
+       $(srcdir)/abbrevs.texi \
+       $(srcdir)/picture.texi \
+       $(srcdir)/sending.texi \
+       $(srcdir)/rmail.texi \
+       $(srcdir)/dired.texi \
+       $(srcdir)/calendar.texi \
+       $(srcdir)/misc.texi \
+       $(srcdir)/custom.texi \
+       $(srcdir)/trouble.texi \
+       $(srcdir)/cmdargs.texi \
+       $(srcdir)/xresources.texi \
+       $(srcdir)/anti.texi \
+       $(srcdir)/macos.texi \
+       $(srcdir)/msdog.texi \
+       $(srcdir)/gnu.texi \
+       $(srcdir)/glossary.texi \
+       $(srcdir)/ack.texi
+
+info: $(INFO_TARGETS)
+
+dvi: $(DVI_TARGETS)
+
+# Note that all the Info targets build the Info files
+# in srcdir.  There is no provision for Info files
+# to exist in the build directory.
+# In a distribution of Emacs, the Info files should be up to date.
+
+# The following target uses an explicit -o switch to work around
+# the @setfilename directive in info.texi, which is required for
+# the Texinfo distribution.
+
+../info/info: $(INFOSOURCES)
+       $(MAKEINFO) --no-split info.texi -o $@
+
+info.dvi: $(INFOSOURCES)
+       $(ENVADD) $(TEXI2DVI) $(srcdir)/info.texi
+
+../info/emacs: $(EMACSSOURCES)
+       $(MAKEINFO) emacs.texi
+
+emacs.dvi: $(EMACSSOURCES)
+       $(ENVADD) $(TEXI2DVI) $(srcdir)/emacs.texi
+
+# This target is here so you could easily get the list of the *.texi
+# files which belong to the Emacs manual (as opposed to the separate
+# manuals for CL, CC Mode, Ebrowse, etc.).  With this target, you can
+# say things like "grep foo `make emacsman`".
+emacsman:
+       @echo $(EMACSSOURCES)
+
+../info/ccmode: cc-mode.texi
+       $(MAKEINFO) cc-mode.texi
+cc-mode.dvi: cc-mode.texi
+       $(ENVADD) $(TEXI2DVI) $(srcdir)/cc-mode.texi
+
+../info/ada-mode: ada-mode.texi
+       $(MAKEINFO) ada-mode.texi
+ada-mode.dvi: ada-mode.texi
+       $(ENVADD) $(TEXI2DVI) $(srcdir)/ada-mode.texi
+
+../info/pcl-cvs: pcl-cvs.texi
+       $(MAKEINFO) pcl-cvs.texi
+pcl-cvs.dvi: pcl-cvs.texi
+       $(ENVADD) $(TEXI2DVI) $(srcdir)/pcl-cvs.texi
+
+../info/eshell: eshell.texi
+       $(MAKEINFO) eshell.texi
+eshell.dvi: eshell.texi
+       $(ENVADD) $(TEXI2DVI) $(srcdir)/eshell.texi
+
+../info/cl: cl.texi
+       $(MAKEINFO) cl.texi
+cl.dvi: cl.texi
+       $(ENVADD) $(TEXI2DVI) $(srcdir)/cl.texi
+
+../info/dired-x: dired-x.texi
+       $(MAKEINFO) dired-x.texi
+dired-x.dvi: dired-x.texi
+       $(ENVADD) $(TEXI2DVI) $(srcdir)/dired-x.texi
+
+../info/ediff: ediff.texi
+       $(MAKEINFO) ediff.texi
+ediff.dvi: ediff.texi
+       $(ENVADD) $(TEXI2DVI) $(srcdir)/ediff.texi
+
+../info/forms: forms.texi
+       $(MAKEINFO) forms.texi
+forms.dvi: forms.texi
+       $(ENVADD) $(TEXI2DVI) $(srcdir)/forms.texi
+
+../info/gnus: gnus.texi
+       $(MAKEINFO) gnus.texi
+gnus.dvi: gnus.texi
+       sed -e '/@iflatex/,/@end iflatex/d' $(srcdir)/gnus.texi > gnustmp.texi 
+       $(ENVADD) $(TEXI2DVI) gnustmp.texi
+       cp gnustmp.dvi $*.dvi
+       rm gnustmp.*
+
+../info/message: message.texi
+       $(MAKEINFO) message.texi
+message.dvi: message.texi
+       $(ENVADD) $(TEXI2DVI) $(srcdir)/message.texi
+
+../info/mh-e: mh-e.texi
+       $(MAKEINFO) mh-e.texi
+mh-e.dvi: mh-e.texi
+       $(ENVADD) $(TEXI2DVI) $(srcdir)/mh-e.texi
+
+../info/reftex: reftex.texi
+       $(MAKEINFO) reftex.texi
+reftex.dvi: reftex.texi
+       $(ENVADD) $(TEXI2DVI) $(srcdir)/reftex.texi
+
+../info/sc: sc.texi
+       $(MAKEINFO) sc.texi
+sc.dvi: sc.texi
+       $(ENVADD) $(TEXI2DVI) $(srcdir)/sc.texi
+
+../info/vip: vip.texi
+       $(MAKEINFO) vip.texi
+vip.dvi: vip.texi
+       $(ENVADD) $(TEXI2DVI) $(srcdir)/vip.texi
+
+../info/viper: viper.texi
+       $(MAKEINFO) viper.texi
+viper.dvi: viper.texi
+       $(ENVADD) $(TEXI2DVI) $(srcdir)/viper.texi
+
+../info/widget: widget.texi
+       $(MAKEINFO) widget.texi
+widget.dvi: widget.texi
+       $(ENVADD) $(TEXI2DVI) $(srcdir)/widget.texi
+
+../info/efaq: faq.texi
+       $(MAKEINFO) faq.texi
+faq.dvi: faq.texi
+       $(ENVADD) $(TEXI2DVI) $(srcdir)/faq.texi
+
+../etc/GNU: gnu1.texi gnu.texi
+       cd $(srcdir) && makeinfo --no-headers -o ../etc/GNU gnu1.texi
+
+../info/autotype: autotype.texi
+       $(MAKEINFO) autotype.texi
+autotype.dvi: autotype.texi
+       $(ENVADD) $(TEXI2DVI) $(srcdir)/autotype.texi
+
+../info/calc: calc.texi
+       $(MAKEINFO) calc.texi
+
+calc.dvi: calc.texi
+       $(ENVADD) $(TEXI2DVI) $(srcdir)/calc.texi
+
+# This is produced with --no-split to avoid making files whose
+# names clash on DOS 8+3 filesystems
+../info/idlwave: idlwave.texi
+       $(MAKEINFO) --no-split idlwave.texi
+idlwave.dvi: idlwave.texi
+       $(ENVADD) $(TEXI2DVI) $(srcdir)/idlwave.texi
+
+../info/eudc: eudc.texi
+       $(MAKEINFO) eudc.texi
+eudc.dvi: eudc.texi
+       $(ENVADD) $(TEXI2DVI) $(srcdir)/eudc.texi
+
+../info/ebrowse: ebrowse.texi
+       $(MAKEINFO) ebrowse.texi
+ebrowse.dvi: ebrowse.texi
+       $(ENVADD) $(TEXI2DVI) $(srcdir)/ebrowse.texi
+
+../info/woman: woman.texi
+       $(MAKEINFO) woman.texi
+woman.dvi: woman.texi
+       $(ENVADD) $(TEXI2DVI) $(srcdir)/woman.texi
+
+../info/speedbar: speedbar.texi
+       $(MAKEINFO) speedbar.texi
+speedbar.dvi: speedbar.texi
+       $(ENVADD) $(TEXI2DVI) $(srcdir)/speedbar.texi
+
+../info/emacs-mime: emacs-mime.texi
+       $(MAKEINFO) emacs-mime.texi
+emacs-mime.dvi: emacs-mime.texi
+       $(ENVADD) $(TEXI2DVI) $(srcdir)/emacs-mime.texi
+
+../info/tramp: tramp.texi
+       $(MAKEINFO) tramp.texi
+tramp.dvi: tramp.texi
+       $(ENVADD) $(TEXI2DVI) $(srcdir)/tramp.texi
+
+../info/ses: ses.texi
+       $(MAKEINFO) ses.texi
+ses.dvi: ses.texi
+       $(ENVADD) $(TEXI2DVI) $(srcdir)/ses.texi
+
+mostlyclean:
+       rm -f *.log *.cp *.fn *.ky *.pg *.vr core *.tp *.core gnustmp.*
+
+clean: mostlyclean
+       rm -f *.dvi
+
+distclean: clean
+
+maintainer-clean: distclean
+       rm -f *.aux *.cps *.fns *.kys *.pgs *.vrs *.toc
+# Don't delete these, because they are outside the current directory.
+#      for file in $(INFO_TARGETS); do rm -f $${file}*; done
+
+
+# Formerly this directory had texindex.c and getopt.c in it
+# and this makefile built them to make texindex.
+# That caused trouble because this is run entirely in the source directory.
+# Since we expect to get texi2dvi from elsewhere,
+# it is ok to expect texindex from elsewhere also.
diff -burN emacs-20030219.orig/nt/configure.bat emacs-20030219/nt/configure.bat
--- emacs-20030219.orig/nt/configure.bat        2003-02-07 10:04:54.000000000 
+0100
+++ emacs-20030219/nt/configure.bat     2003-02-21 21:23:01.000000000 +0100
@@ -433,6 +433,9 @@
 copy /b config.settings+%MAKECMD%.defs+..\nt\makefile.w32-in ..\nt\makefile
 copy /b config.settings+%MAKECMD%.defs+..\lib-src\makefile.w32-in 
..\lib-src\makefile
 copy /b config.settings+%MAKECMD%.defs+..\src\makefile.w32-in ..\src\makefile
+copy /b config.settings+%MAKECMD%.defs+..\man\makefile.w32-in ..\man\makefile
+copy /b config.settings+%MAKECMD%.defs+..\lispref\makefile.w32-in 
..\lispref\makefile
+copy /b config.settings+%MAKECMD%.defs+..\lispintro\makefile.w32-in 
..\lispintro\makefile
 if not exist ..\lisp\Makefile.unix rename ..\lisp\Makefile.in Makefile.unix
 if exist ..\lisp\makefile rm -f ../lisp/[Mm]akefile
 copy /b config.settings+%MAKECMD%.defs+..\lisp\makefile.w32-in ..\lisp\makefile
diff -burN emacs-20030219.orig/nt/makefile.w32-in 
emacs-20030219/nt/makefile.w32-in
--- emacs-20030219.orig/nt/makefile.w32-in      2003-02-07 10:04:54.000000000 
+0100
+++ emacs-20030219/nt/makefile.w32-in   2003-02-21 21:23:01.000000000 +0100
@@ -214,6 +214,15 @@
        $(MAKE) $(MFLAGS) -C ../lisp install
        $(MAKE) $(MFLAGS) -C ../leim install
 
+force-info:
+# Note that man/makefile knows how to
+# put the info files in $(srcdir),
+# so we can do ok running make in the build dir.
+info: force-info
+       (cd ..\man && $(MAKE) $(MFLAGS) info)
+       (cd ..\lispref && $(MAKE) $(MFLAGS) info)
+       (cd ..\lispintro && $(MAKE) $(MFLAGS) info)
+
 #
 # Maintenance
 #