[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Emacs-diffs] Changes to emacs/man/info.texi
From: |
Luc Teirlinck |
Subject: |
[Emacs-diffs] Changes to emacs/man/info.texi |
Date: |
Mon, 07 Jul 2003 21:21:44 -0400 |
Index: emacs/man/info.texi
diff -c emacs/man/info.texi:1.29 emacs/man/info.texi:1.30
*** emacs/man/info.texi:1.29 Fri Jul 4 17:07:23 2003
--- emacs/man/info.texi Mon Jul 7 21:21:43 2003
***************
*** 6,12 ****
@syncodeindex vr cp
@syncodeindex ky cp
@comment %**end of header
! @comment $Id: info.texi,v 1.29 2003/07/04 21:07:23 teirllm Exp $
@copying
This file describes how to use Info, the on-line, menu-driven GNU
--- 6,12 ----
@syncodeindex vr cp
@syncodeindex ky cp
@comment %**end of header
! @comment $Id: info.texi,v 1.30 2003/07/08 01:21:43 teirllm Exp $
@copying
This file describes how to use Info, the on-line, menu-driven GNU
***************
*** 417,423 ****
to visit the next node.
@end format
! @node Help-Inv, Help-M, Help-^L, Getting Started
@comment node-name, next, previous, up
@section Invisible text in Emacs Info
--- 417,423 ----
to visit the next node.
@end format
! @node Help-Inv, Help-M, Help-^L, Getting Started
@comment node-name, next, previous, up
@section Invisible text in Emacs Info
***************
*** 433,452 ****
output, it gets saved to file just like any other text, and so on.
Thus it is useful to know it is there.
! @findex vis-mode
You can make invisible text visible by using the command @kbd{M-x
! vis-mode}. @code{vis-mode} is a minor mode, so using it a second time
! will make the text invisible again. Use this command and watch its
! effect on the ``menu'' below and the top line of this node.
If you prefer to @emph{always} see the invisible text, you can set
@code{Info-hide-note-references} to @code{nil}. Enabling
! @code{vis-mode} permanently is not a real alternative, because Emacs
! Info also uses (although less extensively) another text property that
! can change the text being displayed, the @samp{display} property.
! Only the invisibility property is affected by @code{vis-mode}. When,
! in this tutorial, we refer to the @samp{Emacs} behavior, we mean the
! @emph{default} Emacs behavior.
Now type @kbd{]}, to learn about the @kbd{]} and @kbd{[} commands.
--- 433,452 ----
output, it gets saved to file just like any other text, and so on.
Thus it is useful to know it is there.
! @findex visible-mode
You can make invisible text visible by using the command @kbd{M-x
! visible-mode}. @code{visible-mode} is a minor mode, so using it a
! second time will make the text invisible again. Use this command and
! watch its effect on the ``menu'' below and the top line of this node.
If you prefer to @emph{always} see the invisible text, you can set
@code{Info-hide-note-references} to @code{nil}. Enabling
! @code{visible-mode} permanently is not a real alternative, because
! Emacs Info also uses (although less extensively) another text property
! that can change the text being displayed, the @samp{display} property.
! Only the invisibility property is affected by @code{visible-mode}.
! When, in this tutorial, we refer to the @samp{Emacs} behavior, we mean
! the @emph{default} Emacs behavior.
Now type @kbd{]}, to learn about the @kbd{]} and @kbd{[} commands.
***************
*** 526,532 ****
in a real menu item, the @samp{*} would appear at the very start of
the line. This is why the ``normally hidden'' text in Emacs, namely
@samp{: Node about FOO.}, is actually visible in this example, even
! when @code{vis-mode} is off.]]
When you use a menu to go to another node (in a way that will be
described soon), what you specify is the subtopic name, the first
--- 526,532 ----
in a real menu item, the @samp{*} would appear at the very start of
the line. This is why the ``normally hidden'' text in Emacs, namely
@samp{: Node about FOO.}, is actually visible in this example, even
! when @code{visible-mode} is off.]]
When you use a menu to go to another node (in a way that will be
described soon), what you specify is the subtopic name, the first
***************
*** 619,625 ****
* Help-FOO:: And yet another!
@end menu
! (Turn @code{vis-mode} on if you are using Emacs.)
@format
>> Now type just an @kbd{m} and see what happens:
--- 619,625 ----
* Help-FOO:: And yet another!
@end menu
! (Turn @code{visible-mode} on if you are using Emacs.)
@format
>> Now type just an @kbd{m} and see what happens:
***************
*** 735,741 ****
Cross references look like this: @xref{Help-Cross, Cross}. That text
is a real, live cross reference, whose name is @samp{Cross} and which
points to the node named @samp{Help-Cross}. (The node name is hidden
! in Emacs. Do @kbd{M-x vis-mode} to show or hide it.)
@kindex f @r{(Info mode)}
@findex Info-follow-reference
--- 735,741 ----
Cross references look like this: @xref{Help-Cross, Cross}. That text
is a real, live cross reference, whose name is @samp{Cross} and which
points to the node named @samp{Help-Cross}. (The node name is hidden
! in Emacs. Do @kbd{M-x visible-mode} to show or hide it.)
@kindex f @r{(Info mode)}
@findex Info-follow-reference
***************
*** 787,797 ****
@samp{texinfo} between parentheses (shown in the stand-alone version)
refers to the file name. This file name appears in cross references
and node names if it differs from the current file. In Emacs, the
! file name is hidden (along with other text). (Use @kbd{M-x vis-mode}
! to show or hide it.)
The remainder of this node applies only to the Emacs version. If
! you use the stand-alone version, you can type @kbd{n} immediately.
To some users, switching manuals is a much bigger switch than
switching sections. These users like to know that they are going to
--- 787,797 ----
@samp{texinfo} between parentheses (shown in the stand-alone version)
refers to the file name. This file name appears in cross references
and node names if it differs from the current file. In Emacs, the
! file name is hidden (along with other text). (Use @kbd{M-x
! visible-mode} to show or hide it.)
The remainder of this node applies only to the Emacs version. If
! you use the stand-alone version, you can type @kbd{n} immediately.
To some users, switching manuals is a much bigger switch than
switching sections. These users like to know that they are going to