[Emacs-diffs] Changes to emacs/config.bat [lexbind]

[Miles Bader]

Index: emacs/config.bat
diff -c /dev/null emacs/config.bat:1.33.2.1
*** /dev/null   Tue Oct 14 19:59:15 2003
--- emacs/config.bat    Tue Oct 14 19:59:08 2003
***************
*** 0 ****
--- 1,282 ----
+ @echo off

+ rem   ----------------------------------------------------------------------

+ rem   Configuration script for MSDOS

+ rem   Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2001

+ rem   Free Software Foundation, Inc.

+ 

+ rem   This file is part of GNU Emacs.

+ 

+ rem   GNU Emacs is free software; you can redistribute it and/or modify

+ rem   it under the terms of the GNU General Public License as published by

+ rem   the Free Software Foundation; either version 2, or (at your option)

+ rem   any later version.

+ 

+ rem   GNU Emacs is distributed in the hope that it will be useful,

+ rem   but WITHOUT ANY WARRANTY; without even the implied warranty of

+ rem   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

+ rem   GNU General Public License for more details.

+ 

+ rem   You should have received a copy of the GNU General Public License

+ rem   along with GNU Emacs; see the file COPYING.  If not, write to the

+ rem   Free Software Foundation, Inc., 59 Temple Place - Suite 330,

+ rem   Boston, MA 02111-1307, USA.

+ rem   ----------------------------------------------------------------------

+ rem   YOU'LL NEED THE FOLLOWING UTILITIES TO MAKE EMACS:

+ rem

+ rem   + msdos version 3 or better.

+ rem   + djgpp version 1.12maint1 or later (version 2.0 or later recommended).

+ rem   + make utility that allows breaking of the 128 chars limit on

+ rem     command lines.  ndmake (as of version 4.5) won't work due to a

+ rem     line length limit.  The make that comes with djgpp does work.

+ rem   + rm and mv (from GNU file utilities).

+ rem   + sed (you can use the port that comes with DJGPP).

+ rem

+ rem   You should be able to get all the above utilities from any SimTel

+ rem   repository, e.g. ftp.simtel.net, in the directory

+ rem   "pub/simtelnet/gnu/djgpp/v2gnu".  As usual, please use your local

+ rem   mirroring site to reduce trans-Atlantic traffic.

+ rem   ----------------------------------------------------------------------

+ set X11=

+ set nodebug=

+ set djgpp_ver=

+ if "%1" == "" goto usage

+ rem   ----------------------------------------------------------------------

+ rem   See if their environment is large enough.  We need 28 bytes.

+ set $foo$=789012345678901234567

+ if not "%$foo$%" == "789012345678901234567" goto SmallEnv

+ set $foo$=

+ :again

+ if "%1" == "" goto usage

+ if "%1" == "--with-x" goto withx

+ if "%1" == "--no-debug" goto nodebug

+ if "%1" == "msdos" goto msdos

+ :usage

+ echo Usage: config [--with-x] [--no-debug] msdos

+ echo [Read the script before you run it.]

+ goto end

+ rem   ----------------------------------------------------------------------

+ :withx

+ set X11=Y

+ shift

+ goto again

+ rem   ----------------------------------------------------------------------

+ :nodebug

+ set nodebug=Y

+ shift

+ goto again

+ rem   ----------------------------------------------------------------------

+ :msdos

+ Echo Checking whether 'sed' is available...

+ sed -e "w junk.$$$" <Nul

+ If Exist junk.$$$ Goto sedOk

+ Echo To configure 'Emacs' you need to have 'sed'!

+ Goto End

+ :sedOk

+ Echo Checking whether 'rm' is available...

+ rm -f junk.$$$

+ If Not Exist junk.$$$ Goto rmOk

+ Echo To configure 'Emacs' you need to have 'rm'!

+ Goto End

+ :rmOk

+ Echo Checking whether 'mv' is available...

+ rm -f junk.1 junk.2

+ echo foo >junk.1

+ mv junk.1 ./junk.2

+ If Exist junk.2 Goto mvOk

+ Echo To configure 'Emacs' you need to have 'mv'!

+ rm -f junk.1

+ Goto End

+ :mvOk

+ rm -f junk.2

+ Echo Checking whether 'gcc' is available...

+ echo main(){} >junk.c

+ gcc -c junk.c

+ if exist junk.o goto gccOk

+ Echo To configure 'Emacs' you need to have 'gcc'!

+ rm -f junk.c

+ Goto End

+ :gccOk

+ rm -f junk.c junk.o junk junk.exe

+ Echo Checking what version of DJGPP is installed...

+ If Not "%DJGPP%" == "" goto djgppOk

+ Echo To compile 'Emacs' under MS-DOS you MUST have DJGPP installed!

+ Goto End

+ :djgppOk

+ echo int main()           >junk.c

+ echo #ifdef __DJGPP__    >>junk.c

+ echo {return (__DJGPP__)*10;} >>junk.c

+ echo #else               >>junk.c

+ echo #ifdef __GO32__     >>junk.c

+ echo {return 10;}         >>junk.c

+ echo #else               >>junk.c

+ echo {return 0;}         >>junk.c

+ echo #endif              >>junk.c

+ echo #endif              >>junk.c

+ gcc -o junk junk.c

+ if not exist junk.exe coff2exe junk

+ junk

+ If ErrorLevel 10 Goto go32Ok

+ rm -f junk.c junk junk.exe

+ Echo To compile 'Emacs' under MS-DOS you MUST have DJGPP installed!

+ Goto End

+ :go32Ok

+ set djgpp_ver=1

+ If ErrorLevel 20 set djgpp_ver=2

+ rm -f junk.c junk junk.exe

+ rem DJECHO is used by the top-level Makefile

+ Echo Checking whether 'djecho' is available...

+ redir -o Nul -eo djecho -o junk.$$$ foo

+ If Exist junk.$$$ Goto djechoOk

+ Echo To build 'Emacs' you need the 'djecho.exe' program!

+ Echo 'djecho.exe' is part of 'djdevNNN.zip' basic DJGPP development kit.

+ Echo Versions of DJGPP before 2.02 called this program 'echo.exe'.

+ Echo Either unpack 'djecho.exe' from the 'djdevNNN.zip' archive,

+ Echo or, if you have 'echo.exe', copy it to 'djecho.exe'.

+ Echo Then run CONFIG.BAT again with the same arguments you did now.

+ Goto End

+ :djechoOk

+ rm -f junk.$$$

+ Echo Configuring for DJGPP Version %DJGPP_VER% ...

+ Rem   ----------------------------------------------------------------------

+ Echo Configuring the source directory...

+ cd src

+ 

+ rem   Create "epaths.h"

+ sed -f ../msdos/sed4.inp <epaths.in >epaths.tmp

+ update epaths.tmp epaths.h >nul

+ rm -f epaths.tmp

+ 

+ rem   Create "config.h"

+ rm -f config.h2 config.tmp

+ sed -e '' config.in > config.tmp

+ if "%X11%" == "" goto src4

+ sed -f ../msdos/sed2x.inp <config.in >config.tmp

+ :src4

+ if "%DJGPP_VER%" == "2" Goto src41

+ sed -f ../msdos/sed2.inp <config.tmp >config.h2

+ goto src42

+ :src41

+ sed -f ../msdos/sed2v2.inp <config.tmp >config.h2

+ :src42

+ update config.h2 config.h >nul

+ rm -f config.tmp config.h2

+ 

+ rem   On my system dir.h gets in the way.  It's a VMS file so who cares.

+ if exist dir.h ren dir.h vmsdir.h

+ 

+ rem   Create "makefile" from "makefile.in".

+ rm -f Makefile junk.c

+ sed -e "1,/== start of cpp stuff ==/address@hidden .*$@@" <Makefile.in >junk.c

+ If "%DJGPP_VER%" == "1" Goto mfV1

+ gcc -E -traditional junk.c | sed -f ../msdos/sed1v2.inp >Makefile

+ goto mfDone

+ :mfV1

+ gcc -E -traditional junk.c | sed -f ../msdos/sed1.inp >Makefile

+ :mfDone

+ rm -f junk.c

+ 

+ if "%X11%" == "" goto src5

+ mv Makefile makefile.tmp

+ sed -f ../msdos/sed1x.inp <makefile.tmp >Makefile

+ rm -f makefile.tmp

+ :src5

+ 

+ if "%nodebug%" == "" goto src6

+ sed -e "/^CFLAGS *=/s/ *-gcoff//" <Makefile >makefile.tmp

+ sed -e "/^LDFLAGS *=/s/=/=-s/" <makefile.tmp >Makefile

+ rm -f makefile.tmp

+ :src6

+ cd ..

+ rem   ----------------------------------------------------------------------

+ Echo Configuring the library source directory...

+ cd lib-src

+ rem   Create "makefile" from "makefile.in".

+ sed -e "1,/== start of cpp stuff ==/address@hidden .*$@@" <Makefile.in >junk.c

+ gcc -E -traditional -I. -I../src junk.c | sed -e "s/^ /       /" -e "/^#/d" 
-e "/^[   ]*$/d" >makefile.new

+ If "%DJGPP_VER%" == "2" goto libsrc-v2

+ sed -f ../msdos/sed3.inp <makefile.new >Makefile

+ Goto libsrc2

+ :libsrc-v2

+ sed -f ../msdos/sed3v2.inp <makefile.new >Makefile

+ :libsrc2

+ rm -f makefile.new junk.c

+ if "%nodebug%" == "" goto libsrc3

+ sed -e "/^CFLAGS *=/s/ *-gcoff//" <Makefile >makefile.tmp

+ sed -e "/^ALL_CFLAGS *=/s/=/= -s/" <makefile.tmp >Makefile

+ rm -f makefile.tmp

+ :libsrc3

+ cd ..

+ rem   ----------------------------------------------------------------------

+ if "%X11%" == "" goto oldx1

+ Echo Configuring the oldxmenu directory...

+ cd oldxmenu

+ sed -f ../msdos/sed5x.inp <Makefile.in >Makefile

+ if "%nodebug%" == "" goto oldx2

+ sed -e "/^CFLAGS *=/s/ *-gcoff//" <Makefile >makefile.tmp

+ mv -f makefile.tmp Makefile

+ :oldx2

+ cd ..

+ :oldx1

+ rem   ----------------------------------------------------------------------

+ Echo Configuring the manual directory...

+ cd man

+ sed -f ../msdos/sed6.inp < Makefile.in > Makefile

+ cd ..

+ rem   ----------------------------------------------------------------------

+ Echo Configuring the ELisp manual directory...

+ cd lispref

+ sed -f ../msdos/sed6.inp < Makefile.in > Makefile

+ cd ..

+ rem   ----------------------------------------------------------------------

+ Echo Configuring the ELisp Introduction manual directory...

+ Rem The two variants for the line below is for when the shell

+ Rem supports long file names but DJGPP does not

+ if exist lispintro\Makefile.in cd lispintro

+ if exist lispintr\Makefile.in cd lispintr

+ sed -f ../msdos/sed6.inp < Makefile.in > Makefile

+ cd ..

+ rem   ----------------------------------------------------------------------

+ Echo Configuring the lisp directory...

+ cd lisp

+ sed -f ../msdos/sedlisp.inp < Makefile.in > Makefile

+ cd ..

+ rem   ----------------------------------------------------------------------

+ If not Exist leim\quail\latin-pre.el goto maindir

+ Echo Configuring the leim directory...

+ cd leim

+ sed -f ../msdos/sedleim.inp < Makefile.in > Makefile

+ cd ..

+ rem   ----------------------------------------------------------------------

+ :maindir

+ Echo Configuring the main directory...

+ If "%DJGPP_VER%" == "1" goto mainv1

+ Echo Looking for the GDB init file...

+ If Exist src\.gdbinit update src/.gdbinit src/_gdbinit

+ If Exist src\_gdbinit goto gdbinitOk

+ Echo ERROR:

+ Echo I cannot find the GDB init file.  It was called ".gdbinit" in

+ Echo the Emacs distribution, but was probably renamed to some other

+ Echo name without the leading dot when you untarred the archive.

+ Echo It should be in the "src/" subdirectory.  Please make sure this

+ Echo file exists and is called "_gdbinit" with a leading underscore.

+ Echo Then run CONFIG.BAT again with the same arguments you did now.

+ goto End

+ :gdbinitOk

+ Echo Looking for the GDB init file...found

+ copy msdos\mainmake.v2 Makefile >nul

+ :mainv1

+ If "%DJGPP_VER%" == "1" copy msdos\mainmake Makefile >nul

+ rem   ----------------------------------------------------------------------

+ goto End

+ :SmallEnv

+ echo Your environment size is too small.  Please enlarge it and run me again.

+ echo For example, type "command.com /e:2048" to have 2048 bytes available.

+ set $foo$=

+ :end

+ set X11=

+ set nodebug=

+ set djgpp_ver=

+ 
+ goto skipArchTag
+    arch-tag: 2d2fed23-4dc6-4006-a2e4-49daf0031f33
+ :skipArchTag