[Emacs-diffs] Changes to emacs/config.bat [gnus-5_10-branch]

[Miles Bader]

Index: emacs/config.bat
diff -c /dev/null emacs/config.bat:1.35.2.1
*** /dev/null   Sat Sep  4 12:01:22 2004
--- emacs/config.bat    Sat Sep  4 12:01:05 2004
***************
*** 0 ****
--- 1,280 ----
+ @echo off
+ rem   ----------------------------------------------------------------------
+ rem   Configuration script for MSDOS
+ rem   Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2001, 2004
+ rem   Free Software Foundation, Inc.
+ 
+ rem   This file is part of GNU Emacs.
+ 
+ rem   GNU Emacs is free software; you can redistribute it and/or modify
+ rem   it under the terms of the GNU General Public License as published by
+ rem   the Free Software Foundation; either version 2, or (at your option)
+ rem   any later version.
+ 
+ rem   GNU Emacs is distributed in the hope that it will be useful,
+ rem   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ rem   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ rem   GNU General Public License for more details.
+ 
+ rem   You should have received a copy of the GNU General Public License
+ rem   along with GNU Emacs; see the file COPYING.  If not, write to the
+ rem   Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+ rem   Boston, MA 02111-1307, USA.
+ rem   ----------------------------------------------------------------------
+ rem   YOU'LL NEED THE FOLLOWING UTILITIES TO MAKE EMACS:
+ rem
+ rem   + msdos version 3 or better.
+ rem   + DJGPP version 1.12maint1 or later (version 2.03 or later recommended).
+ rem   + make utility that allows breaking of the 128 chars limit on
+ rem     command lines.  ndmake (as of version 4.5) won't work due to a
+ rem     line length limit.  The make that comes with DJGPP does work.
+ rem   + rm and mv (from GNU file utilities).
+ rem   + sed (you can use the port that comes with DJGPP).
+ rem
+ rem   You should be able to get all the above utilities from the DJGPP FTP
+ rem   site, ftp.delorie.com, in the directory "pub/djgpp/current/v2gnu".
+ rem   ----------------------------------------------------------------------
+ set X11=
+ set nodebug=
+ set djgpp_ver=
+ if "%1" == "" goto usage
+ rem   ----------------------------------------------------------------------
+ rem   See if their environment is large enough.  We need 28 bytes.
+ set $foo$=789012345678901234567
+ if not "%$foo$%" == "789012345678901234567" goto SmallEnv
+ set $foo$=
+ :again
+ if "%1" == "" goto usage
+ if "%1" == "--with-x" goto withx
+ if "%1" == "--no-debug" goto nodebug
+ if "%1" == "msdos" goto msdos
+ :usage
+ echo Usage: config [--with-x] [--no-debug] msdos
+ echo [Read the script before you run it.]
+ goto end
+ rem   ----------------------------------------------------------------------
+ :withx
+ set X11=Y
+ shift
+ goto again
+ rem   ----------------------------------------------------------------------
+ :nodebug
+ set nodebug=Y
+ shift
+ goto again
+ rem   ----------------------------------------------------------------------
+ :msdos
+ Echo Checking whether 'sed' is available...
+ sed -e "w junk.$$$" <Nul
+ If Exist junk.$$$ Goto sedOk
+ Echo To configure 'Emacs' you need to have 'sed'!
+ Goto End
+ :sedOk
+ Echo Checking whether 'rm' is available...
+ rm -f junk.$$$
+ If Not Exist junk.$$$ Goto rmOk
+ Echo To configure 'Emacs' you need to have 'rm'!
+ Goto End
+ :rmOk
+ Echo Checking whether 'mv' is available...
+ rm -f junk.1 junk.2
+ echo foo >junk.1
+ mv junk.1 ./junk.2
+ If Exist junk.2 Goto mvOk
+ Echo To configure 'Emacs' you need to have 'mv'!
+ rm -f junk.1
+ Goto End
+ :mvOk
+ rm -f junk.2
+ Echo Checking whether 'gcc' is available...
+ echo main(){} >junk.c
+ gcc -c junk.c
+ if exist junk.o goto gccOk
+ Echo To configure 'Emacs' you need to have 'gcc'!
+ rm -f junk.c
+ Goto End
+ :gccOk
+ rm -f junk.c junk.o junk junk.exe
+ Echo Checking what version of DJGPP is installed...
+ If Not "%DJGPP%" == "" goto djgppOk
+ Echo To compile 'Emacs' under MS-DOS you MUST have DJGPP installed!
+ Goto End
+ :djgppOk
+ echo int main()           >junk.c
+ echo #ifdef __DJGPP__    >>junk.c
+ echo {return (__DJGPP__)*10;} >>junk.c
+ echo #else               >>junk.c
+ echo #ifdef __GO32__     >>junk.c
+ echo {return 10;}         >>junk.c
+ echo #else               >>junk.c
+ echo {return 0;}         >>junk.c
+ echo #endif              >>junk.c
+ echo #endif              >>junk.c
+ gcc -o junk junk.c
+ if not exist junk.exe coff2exe junk
+ junk
+ If ErrorLevel 10 Goto go32Ok
+ rm -f junk.c junk junk.exe
+ Echo To compile 'Emacs' under MS-DOS you MUST have DJGPP installed!
+ Goto End
+ :go32Ok
+ set djgpp_ver=1
+ If ErrorLevel 20 set djgpp_ver=2
+ rm -f junk.c junk junk.exe
+ rem DJECHO is used by the top-level Makefile
+ Echo Checking whether 'djecho' is available...
+ redir -o Nul -eo djecho -o junk.$$$ foo
+ If Exist junk.$$$ Goto djechoOk
+ Echo To build 'Emacs' you need the 'djecho.exe' program!
+ Echo 'djecho.exe' is part of 'djdevNNN.zip' basic DJGPP development kit.
+ Echo Versions of DJGPP before 2.02 called this program 'echo.exe'.
+ Echo Either unpack 'djecho.exe' from the 'djdevNNN.zip' archive,
+ Echo or, if you have 'echo.exe', copy it to 'djecho.exe'.
+ Echo Then run CONFIG.BAT again with the same arguments you did now.
+ Goto End
+ :djechoOk
+ rm -f junk.$$$
+ Echo Configuring for DJGPP Version %DJGPP_VER% ...
+ Rem   ----------------------------------------------------------------------
+ Echo Configuring the source directory...
+ cd src
+ 
+ rem   Create "epaths.h"
+ sed -f ../msdos/sed4.inp <epaths.in >epaths.tmp
+ update epaths.tmp epaths.h >nul
+ rm -f epaths.tmp
+ 
+ rem   Create "config.h"
+ rm -f config.h2 config.tmp
+ sed -e '' config.in > config.tmp
+ if "%X11%" == "" goto src4
+ sed -f ../msdos/sed2x.inp <config.in >config.tmp
+ :src4
+ if "%DJGPP_VER%" == "2" Goto src41
+ sed -f ../msdos/sed2.inp <config.tmp >config.h2
+ goto src42
+ :src41
+ sed -f ../msdos/sed2v2.inp <config.tmp >config.h2
+ :src42
+ update config.h2 config.h >nul
+ rm -f config.tmp config.h2
+ 
+ rem   On my system dir.h gets in the way.  It's a VMS file so who cares.
+ if exist dir.h ren dir.h vmsdir.h
+ 
+ rem   Create "makefile" from "makefile.in".
+ rm -f Makefile junk.c
+ sed -e "1,/== start of cpp stuff ==/address@hidden .*$@@" <Makefile.in >junk.c
+ If "%DJGPP_VER%" == "1" Goto mfV1
+ gcc -E -traditional junk.c | sed -f ../msdos/sed1v2.inp >Makefile
+ goto mfDone
+ :mfV1
+ gcc -E -traditional junk.c | sed -f ../msdos/sed1.inp >Makefile
+ :mfDone
+ rm -f junk.c
+ 
+ if "%X11%" == "" goto src5
+ mv Makefile makefile.tmp
+ sed -f ../msdos/sed1x.inp <makefile.tmp >Makefile
+ rm -f makefile.tmp
+ :src5
+ 
+ if "%nodebug%" == "" goto src6
+ sed -e "/^CFLAGS *=/s/ *-gcoff//" <Makefile >makefile.tmp
+ sed -e "/^LDFLAGS *=/s/=/=-s/" <makefile.tmp >Makefile
+ rm -f makefile.tmp
+ :src6
+ cd ..
+ rem   ----------------------------------------------------------------------
+ Echo Configuring the library source directory...
+ cd lib-src
+ rem   Create "makefile" from "makefile.in".
+ sed -e "1,/== start of cpp stuff ==/address@hidden    ].*$@@" <Makefile.in 
>junk.c
+ gcc -E -traditional -I. -I../src junk.c | sed -e "s/^ /       /" -e "/^#/d" 
-e "/^[   ]*$/d" >makefile.new
+ If "%DJGPP_VER%" == "2" goto libsrc-v2
+ sed -f ../msdos/sed3.inp <makefile.new >Makefile
+ Goto libsrc2
+ :libsrc-v2
+ sed -f ../msdos/sed3v2.inp <makefile.new >Makefile
+ :libsrc2
+ rm -f makefile.new junk.c
+ if "%nodebug%" == "" goto libsrc3
+ sed -e "/^CFLAGS *=/s/ *-gcoff//" <Makefile >makefile.tmp
+ sed -e "/^ALL_CFLAGS *=/s/=/= -s/" <makefile.tmp >Makefile
+ rm -f makefile.tmp
+ :libsrc3
+ cd ..
+ rem   ----------------------------------------------------------------------
+ if "%X11%" == "" goto oldx1
+ Echo Configuring the oldxmenu directory...
+ cd oldxmenu
+ sed -f ../msdos/sed5x.inp <Makefile.in >Makefile
+ if "%nodebug%" == "" goto oldx2
+ sed -e "/^CFLAGS *=/s/ *-gcoff//" <Makefile >makefile.tmp
+ mv -f makefile.tmp Makefile
+ :oldx2
+ cd ..
+ :oldx1
+ rem   ----------------------------------------------------------------------
+ Echo Configuring the manual directory...
+ cd man
+ sed -f ../msdos/sed6.inp < Makefile.in > Makefile
+ cd ..
+ rem   ----------------------------------------------------------------------
+ Echo Configuring the ELisp manual directory...
+ cd lispref
+ sed -f ../msdos/sed6.inp < Makefile.in > Makefile
+ cd ..
+ rem   ----------------------------------------------------------------------
+ Echo Configuring the ELisp Introduction manual directory...
+ Rem The two variants for the line below is for when the shell
+ Rem supports long file names but DJGPP does not
+ if exist lispintro\Makefile.in cd lispintro
+ if exist lispintr\Makefile.in cd lispintr
+ sed -f ../msdos/sed6.inp < Makefile.in > Makefile
+ cd ..
+ rem   ----------------------------------------------------------------------
+ Echo Configuring the lisp directory...
+ cd lisp
+ sed -f ../msdos/sedlisp.inp < Makefile.in > Makefile
+ cd ..
+ rem   ----------------------------------------------------------------------
+ If not Exist leim\quail\latin-pre.el goto maindir
+ Echo Configuring the leim directory...
+ cd leim
+ sed -f ../msdos/sedleim.inp < Makefile.in > Makefile
+ cd ..
+ rem   ----------------------------------------------------------------------
+ :maindir
+ Echo Configuring the main directory...
+ If "%DJGPP_VER%" == "1" goto mainv1
+ Echo Looking for the GDB init file...
+ If Exist src\.gdbinit update src/.gdbinit src/_gdbinit
+ If Exist src\_gdbinit goto gdbinitOk
+ Echo ERROR:
+ Echo I cannot find the GDB init file.  It was called ".gdbinit" in
+ Echo the Emacs distribution, but was probably renamed to some other
+ Echo name without the leading dot when you untarred the archive.
+ Echo It should be in the "src/" subdirectory.  Please make sure this
+ Echo file exists and is called "_gdbinit" with a leading underscore.
+ Echo Then run CONFIG.BAT again with the same arguments you did now.
+ goto End
+ :gdbinitOk
+ Echo Looking for the GDB init file...found
+ copy msdos\mainmake.v2 Makefile >nul
+ :mainv1
+ If "%DJGPP_VER%" == "1" copy msdos\mainmake Makefile >nul
+ rem   ----------------------------------------------------------------------
+ goto End
+ :SmallEnv
+ echo Your environment size is too small.  Please enlarge it and run me again.
+ echo For example, type "command.com /e:2048" to have 2048 bytes available.
+ set $foo$=
+ :end
+ set X11=
+ set nodebug=
+ set djgpp_ver=
+ 
+ goto skipArchTag
+    arch-tag: 2d2fed23-4dc6-4006-a2e4-49daf0031f33
+ :skipArchTag