[Emacs-diffs] Changes to emacs/doc/misc/gnus.texi,v

[Miles Bader]

CVSROOT:        /cvsroot/emacs
Module name:    emacs
Changes by:     Miles Bader <miles>     08/06/17 02:32:59

Index: doc/misc/gnus.texi
===================================================================
RCS file: /cvsroot/emacs/emacs/doc/misc/gnus.texi,v
retrieving revision 1.27
retrieving revision 1.28
diff -u -b -r1.27 -r1.28
--- doc/misc/gnus.texi  15 Jun 2008 02:30:23 -0000      1.27
+++ doc/misc/gnus.texi  17 Jun 2008 02:32:57 -0000      1.28
@@ -4398,9 +4398,9 @@
 * nnmairix caveats::            Some more stuff you might want to know
 @end menu
 
address@hidden FIXME: The markup in this section needs improvement.  E.g. add
address@hidden @sample{...}, maybe remove some @strong{...}, convert ` - ' to 
`---`,
address@hidden ...
address@hidden FIXME: The markup in this section might need improvement.
address@hidden E.g. adding @samp, @var, @file, @command, etc.
address@hidden Cf. (info "(texinfo)Indicating")
 
 @node About mairix
 @subsubsection About mairix
@@ -4436,16 +4436,15 @@
 @node nnmairix requirements
 @subsubsection nnmairix requirements
 
-Mairix searches local mail - that means, mairix absolutely must have
+Mairix searches local mail---that means, mairix absolutely must have
 direct access to your mail folders.  If your mail resides on another
 server (e.g. an @acronym{IMAP} server) and you happen to have shell
 access, @code{nnmairix} supports running mairix remotely, e.g. via ssh.
 
 Additionally, @code{nnmairix} only supports the following Gnus back
-ends: @code{nnml}, @code{nnmaildir}, and @code{nnimap}.  You
address@hidden use one of these back ends for using
address@hidden  Other back ends, like @code{nnmbox}, @code{nnfolder} or
address@hidden, won't work.
+ends: @code{nnml}, @code{nnmaildir}, and @code{nnimap}.  You must use
+one of these back ends for using @code{nnmairix}.  Other back ends, like
address@hidden, @code{nnfolder} or @code{nnmh}, won't work.
 
 If you absolutely must use mbox and still want to use @code{nnmairix},
 you can set up a local @acronym{IMAP} server, which you then access via
@@ -4473,7 +4472,7 @@
 You might ask why you need @code{nnmairix} at all, since mairix already
 creates the group, populates it with links to the mails so that you can
 then access it with Gnus, right? Well, this @emph{might} work, but often
-does not - at least not without problems.  Most probably you will get
+does not---at least not without problems.  Most probably you will get
 strange article counts, and sometimes you might see mails which Gnus
 claims have already been canceled and are inaccessible.  This is due to
 the fact that Gnus isn't really amused when things are happening behind
@@ -4482,7 +4481,7 @@
 about corrupt index files when mairix changed the contents of the search
 group).  Using @code{nnmairix} should circumvent these problems.
 
address@hidden is not really a mail back end - it's actually more like a
address@hidden is not really a mail back end---it's actually more like a
 wrapper, sitting between a ``real'' mail back end where mairix stores the
 searches and the Gnus front end.  You can choose between three different
 mail back ends for the mairix folders: @code{nnml}, @code{nnmaildir} or
@@ -4495,7 +4494,7 @@
 alongside your other mail, you can also create e.g. a new
 @code{nnmaildir} server exclusively for mairix.  However, a special case
 exists if you want to use mairix remotely on an IMAP server with
address@hidden - here the mairix folders and your other mail must be on
address@hidden the mairix folders and your other mail must be on
 the same @code{nnimap} back end.
 
 @node Setting up mairix
@@ -4511,12 +4510,11 @@
 base=~/Maildir
 @end example
 
-This is the base folder for your mails.  All the following paths are
-relative to this base folder.  If you want to use @code{nnmairix} with
address@hidden, this base path has to point to the mail path where the
address@hidden server stores the mail folders!
+This is the base folder for your mails.  All the following directories
+are relative to this base folder.  If you want to use @code{nnmairix}
+with @code{nnimap}, this base directory has to point to the mail
+directory where the @acronym{IMAP} server stores the mail folders!
 
address@hidden FIXME: Add typical examples?
 @example
 maildir= ... your maildir folders which should be indexed ...
 mh= ... your nnml/mh folders which should be indexed ...
@@ -4524,7 +4522,7 @@
 @end example
 
 Specify all your maildir/nnml folders and mbox files (relative to the
-base path!) you want to index with mairix.  See the man-page for
+base directory!) you want to index with mairix.  See the man-page for
 mairixrc for details.
 
 @example
@@ -4536,7 +4534,6 @@
 search results.  You can change the prefix of these folders with the
 variable @code{nnmairix-group-prefix}.
 
address@hidden FIXME: Add typical examples?
 @example
 mformat= ... 'maildir' or 'mh' ...
 database= ... location of database file ...
@@ -4546,8 +4543,38 @@
 search folder.  Set this to @code{mh} if you want to access search results
 with @code{nnml}.  Otherwise choose @code{maildir}.
 
-See the man pages for mairix and mairixrc for further options.  Now
-simply call @code{mairix} to create the index for the first time.
+To summarize, here is my shortened @file{.mairixrc} file as an example:
+
address@hidden
+base=~/Maildir
+maildir=.personal:.work:.logcheck:.sent
+mh=../Mail/nnml/*...
+mbox=../mboxmail/mailarchive_year*
+mformat=maildir
+omit=zz_mairix-*
+database=~/.mairixdatabase
address@hidden example
+
+In this case, the base directory is @file{~/Maildir}, where all my Maildir
+folders are stored.  As you can see, the folders are separated by
+colons.  If you wonder why every folder begins with a dot: this is
+because I use Dovecot as @acronym{IMAP} server, which again uses
address@hidden folders.  For testing nnmairix, I also have some
address@hidden mail, which is saved in @file{~/Mail/nnml}.  Since this has
+to be specified relative to the @code{base} directory, the @code{../Mail}
+notation is needed.  Note that the line ends in @code{*...}, which means
+to recursively scan all files under this directory.  Without the three
+dots, the wildcard @code{*} will not work recursively.  I also have some
+old mbox files with archived mail lying around in @file{~/mboxmail}.
+The other lines should be obvious.
+
+See the man page for @code{mairixrc} for details and further options,
+especially regarding wildcard usage, which may be a little different
+than you are used to.
+
+Now simply call @code{mairix} to create the index for the first time.
+Note that this may take a few minutes, but every following index will do
+the updates incrementally and hence is very fast.
 
 @node Configuring nnmairix
 @subsubsection Configuring nnmairix
@@ -4560,7 +4587,7 @@
 @itemize @bullet
 
 @item
-The @strong{name} of the @code{nnmairix} server - choose whatever you
+The @strong{name} of the @code{nnmairix} server---choose whatever you
 want.
 
 @item
@@ -4743,7 +4770,7 @@
 e.g. replying to this article the correct posting styles/group
 parameters are applied (@code{nnmairix-goto-original-article}).  This
 function will use the registry if available, but can also parse the
-article file path as a fallback method.
+article file name as a fallback method.
 
 @item $ u
 @kindex $ u (Summary)
@@ -4781,11 +4808,11 @@
 groups instead of your ``real'' mail groups.
 
 There is one problem, though: say you got a new mail from
address@hidden@@foobar.com} - it will now show up in two groups, the
address@hidden@@foobar.com}; it will now show up in two groups, the
 ``real'' group (your INBOX, for example) and in the @code{nnmairix}
 search group (provided you have updated the mairix database). Now you
 enter the @code{nnmairix} group and read the mail. The mail will be
-marked as read, but only in the @code{nnmairix} group - in the ``real''
+marked as read, but only in the @code{nnmairix} group---in the ``real''
 mail group it will be still shown as unread.
 
 You could now catch up the mail group (@pxref{Group Data}), but this is
@@ -4832,11 +4859,11 @@
 
 @vindex nnmairix-only-use-registry
 If you don't want to use the registry or the registry hasn't seen the
-original article yet, @code{nnmairix} will use an additional mairix search
-for determining the file path of the article. This, of course, is way
-slower than the registry - if you set hundreds or even thousands of
-marks this way, it might take some time. You can avoid this situation
-by setting @code{nnmairix-only-use-registry} to t.
+original article yet, @code{nnmairix} will use an additional mairix
+search for determining the file name of the article. This, of course, is
+way slower than the registry---if you set hundreds or even thousands of
+marks this way, it might take some time. You can avoid this situation by
+setting @code{nnmairix-only-use-registry} to t.
 
 Maybe you also want to propagate marks the other way round, i.e. if you
 tick an article in a "real" mail group, you'd like to have the same
@@ -4898,7 +4925,7 @@
 Now activate marks propagation for this group by using @kbd{G b p}. Then
 activate the always-unread feature by using @kbd{G b r} twice.
 
-So far so good - but how do you remove the tick marks in the @code{nnmairix}
+So far so good---but how do you remove the tick marks in the @code{nnmairix}
 group?  There are two options: You may simply use
 @code{nnmairix-remove-tick-mark-original-article} (bound to @kbd{$ u}) to 
remove
 tick marks from the original article. The other possibility is to set
@@ -4920,7 +4947,7 @@
 the mail back end in the form @samp{zz_mairix-<NAME>-<NUMBER>}. You can
 see them when you enter the back end server in the server buffer. You
 should not subscribe these groups! Unfortunately, these groups will
-usually get @strong{auto-subscribed} when you use @code{nnmaildir} or
+usually get @emph{auto-subscribed} when you use @code{nnmaildir} or
 @code{nnml}, i.e. you will suddenly see groups of the form
 @samp{zz_mairix*} pop up in your group buffer. If this happens to you,
 simply kill these groups with C-k.  For avoiding this, turn off
@@ -4947,13 +4974,13 @@
 @item
 If you use the Gnus registry: don't use the registry with
 @code{nnmairix} groups (put them in
address@hidden).  Be @strong{extra careful} if
-you use @code{gnus-registry-split-fancy-with-parent} - mails which are
address@hidden).  Be @emph{extra careful} if
+you use @code{gnus-registry-split-fancy-with-parent}; mails which are
 split into @code{nnmairix} groups are usually gone for good as soon as
 you check the group for new mail (yes, it has happened to me...).
 
 @item
-Therefore: @strong{Never ever} put ``real'' mails into @code{nnmairix}
+Therefore: @emph{Never ever} put ``real'' mails into @code{nnmairix}
 groups (you shouldn't be able to, anyway).
 
 @item
@@ -4962,7 +4989,7 @@
 @item
 @code{nnmairix} uses a rather brute force method to force Gnus to
 completely reread the group on the mail back end after mairix was
-called - it simply deletes and re-creates the group on the mail
+called---it simply deletes and re-creates the group on the mail
 back end. So far, this has worked for me without any problems, and I
 don't see how @code{nnmairix} could delete other mail groups than its
 own, but anyway: you really should have a backup of your mail
@@ -4986,7 +5013,7 @@
 @code{nnmairix-group-prefix}.
 
 @item
-The following only applies if you @strong{don't} use the mentioned patch
+The following only applies if you @emph{don't} use the mentioned patch
 for mairix (@pxref{Propagating marks}):
 
 A problem can occur when using @code{nnmairix} with maildir folders and
@@ -15382,8 +15409,8 @@
 (the deletion will only happen when receiving new mail).  You may also
 set @code{mail-source-delete-incoming} to @code{nil} and call
 @code{mail-source-delete-old-incoming} from a hook or interactively.
address@hidden defaults to @code{2} in alpha Gnusae
-and @code{10} in released Gnusae.  @xref{Gnus Development}.
address@hidden defaults to @code{10} in alpha Gnusae
+and @code{2} in released Gnusae.  @xref{Gnus Development}.
 
 @item mail-source-delete-old-incoming-confirm
 @vindex mail-source-delete-old-incoming-confirm
@@ -28604,7 +28631,7 @@
 @item You can now drag and drop attachments to the Message buffer.
 See @code{mml-dnd-protocol-alist} and @code{mml-dnd-attach-options}.
 @xref{MIME, ,MIME, message, Message Manual}.
address@hidden New in 5.10.9 / 5.11 (Emacs 21.1)
address@hidden New in 5.10.9 / 5.11 (Emacs 22.1)
 
 @item @code{auto-fill-mode} is enabled by default in Message mode.
 See @code{message-fill-column}.  @xref{Various Message Variables, ,