[Emacs-diffs] Changes to src/m/hp9000s300.h

[Dan Nicolaescu]

CVSROOT:        /cvsroot/emacs
Module name:    emacs
Changes by:     Dan Nicolaescu <dann>   08/06/26 04:24:54

Index: src/m/hp9000s300.h
===================================================================
RCS file: src/m/hp9000s300.h
diff -N src/m/hp9000s300.h
--- src/m/hp9000s300.h  7 May 2008 07:05:58 -0000       1.24
+++ /dev/null   1 Jan 1970 00:00:00 -0000
@@ -1,212 +0,0 @@
-/* machine description file for hp9000 series 200 or 300 on either HPUX or BSD.
-   Copyright (C) 1985, 2001, 2002, 2003, 2004, 2005, 2006, 2007,
-                 2008  Free Software Foundation, Inc.
-
-This file is part of GNU Emacs.
-
-GNU Emacs is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 3 of the License, or
-(at your option) any later version.
-
-GNU Emacs is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with GNU Emacs.  If not, see <http://www.gnu.org/licenses/>.  */
-
-
-/* The following line tells the configuration script what sort of
-   operating system this machine is likely to run.
-   USUAL-OPSYS="note"
-
-NOTE-START
-HP 9000 series 200 or 300 (-machine=hp9000s300)
-
-  These machines are 68000-series CPUs running HP-UX
-  (a derivative of sysV with some BSD features) or BSD 4.3 ported by Utah.
-
-  If you're running HP-UX, specify `-opsystem=hpux'.
-  If you're running BSD, specify `-opsystem=bsd4-3'.
-NOTE-END */
-
-/* I don't understand why we have to do this at all!  -JimB */
-
-/* Define NOMULTIPLEJOBS on versions of HPUX before 6.5.  */
-
-/* #define NOMULTIPLEJOBS */
-
-/* Define this symbol if you are running a version of HP-UX
-   which predates version 6.01 */
-
-/* #define HPUX_5 */
-
-/* Define WORDS_BIG_ENDIAN if lowest-numbered byte in a word
-   is the most significant byte.  */
-
-#define WORDS_BIG_ENDIAN
-
-/* Define NO_ARG_ARRAY if you cannot take the address of the first of a
- * group of arguments and treat it as an array of the arguments.  */
-
-/* #define NO_ARG_ARRAY */
-
-/* Define WORD_MACHINE if addresses and such have
- * to be corrected before they can be used as byte counts.  */
-
-/* #define WORD_MACHINE */
-
-/* Now define a symbol for the cpu type, if your compiler
-   does not define it automatically.  */
-
-#ifndef hp9000s300
-#define hp9000s300
-#endif
-
-/* Use type int rather than a union, to represent Lisp_Object */
-/* This is desirable for most machines.  */
-
-#define NO_UNION_TYPE
-
-/* Define EXPLICIT_SIGN_EXTEND if XINT must explicitly sign-extend
-   the 24-bit bit field into an int.  In other words, if bit fields
-   are always unsigned.
-
-   If you use NO_UNION_TYPE, this flag does not matter.  */
-
-#define EXPLICIT_SIGN_EXTEND
-
-/* Define CANNOT_DUMP on machines where unexec does not work.
-   Then the function dump-emacs will not be defined
-   and temacs will do (load "loadup") automatically unless told otherwise.  */
-
-/* #define CANNOT_DUMP */
-
-/* Define VIRT_ADDR_VARIES if the virtual addresses of
-   pure and impure space as loaded can vary, and even their
-   relative order cannot be relied on.
-
-   Otherwise Emacs assumes that text space precedes data space,
-   numerically.  */
-
-/* #define VIRT_ADDR_VARIES */
-
-/* For University of Utah 4.3bsd implementation on HP300s.
-   The #ifndef __GNUC__ definitions are required for the "standard" cc,
-   a very old, brain-dead version of PCC. */
-
-#ifdef BSD4_3
-
-/* Tell crt0.c that this is an ordinary 68020.  */
-#undef hp9000s300
-#define m68000
-
-#define CRT0_DUMMIES           bogus_a6,
-
-#ifndef __GNUC__
-#define LIBS_DEBUG             /* don't have -lg that works */
-#define C_DEBUG_SWITCH         /* don't support -g */
-#endif
-
-#undef LOAD_AVE_TYPE
-#undef LOAD_AVE_CVT
-#define LOAD_AVE_TYPE long
-#define LOAD_AVE_CVT(x) ((int) (((double) (x)) / 2048.0 * 100.0))
-
-#endif /* BSD4_3 */
-
-#ifndef BSD4_3
-/* The following definitions are for HPUX only.  */
-
-/* The symbol in the kernel where the load average is found
-   is named _avenrun on this machine.  */
-
-#define LDAV_SYMBOL "_avenrun"
-
-/* Data type of load average, as read out of kmem.  */
-
-#define LOAD_AVE_TYPE double
-
-/* Convert that into an integer that is 100 for a load average of 1.0  */
-
-#define LOAD_AVE_CVT(x) ((int) ((x) * 100.0))
-
-/* This library is needed with -g, on the 200/300 only.  */
-
-#if !defined(__GNUC__) || defined(__HPUX_ASM__)
-#define LIBS_DEBUG /usr/lib/end.o
-#endif
-
-/* Need a TEXT_START.  On the HP9000/s300 that is 0.  */
-#ifdef __GNUC__
-#define TEXT_START   0
-#endif
-
-/* The symbol FIONREAD is defined, but the feature does not work
-   on the 200/300.  */
-
-#define BROKEN_FIONREAD
-
-/* In older versions of hpux, for unknown reasons, S_IFLNK is defined
-   even though symbolic links do not exist.
-   Make sure our conditionals based on S_IFLNK are not confused.
-
-   Here we assume that stat.h is included before config.h
-   so that we can override it here.
-
-   Version 6 of HP-UX has symbolic links.  */
-
-#ifdef HPUX_5
-#undef S_IFLNK
-#endif
-
-/* Define the BSTRING functions in terms of the sysV functions.
-   Version 6 of HP-UX supplies these in the BSD library,
-   but that library has reported bugs in `signal'.  */
-
-/* #ifdef HPUX_5 */
-#define bcopy(a,b,s)   memcpy (b,a,s)
-#define bzero(a,s)     memset (a,0,s)
-#define bcmp           memcmp
-/* #endif */
-
-/* On USG systems these have different names.
-   Version 6 of HP-UX supplies these in the BSD library,
-   which we currently want to avoid using.  */
-
-/* #ifdef HPUX_5 */
-#define index strchr
-#define rindex strrchr
-/* #endif */
-
-/* Define C_SWITCH_MACHINE to be +X if you want the s200/300
- * Emacs to run on both 68010 and 68020 based hp-ux's.
- *
- * Define OLD_HP_ASSEMBLER if you have an ancient assembler
- *
- * Define HPUX_68010 if you are using the new assembler but
- * compiling for a s200 (upgraded) or s310.  68010 based
- * processor without 68881.
- */
-
-/* These switches increase the size of some internal C compiler tables.
-   They are required for compiling the X11 interface files. */
-
-#ifndef HPUX_5
-#ifndef __GNUC__
-#define C_SWITCH_MACHINE -Wc,-Nd4000,-Ns3000
-#endif
-#endif
-
-/* Define NEED_BSDTTY if you have such. */
-
-#ifndef NOMULTIPLEJOBS
-#define NEED_BSDTTY
-#endif
-
-#endif /* not BSD4_3 */
-
-/* arch-tag: 6e0001a5-ed62-4258-9235-204348f6bdb9
-   (do not change this comment) */