[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[elpa] 245/299: Use TeX-esc as completion separator for units in siunitx
|
From: |
Stefan Monnier |
|
Subject: |
[elpa] 245/299: Use TeX-esc as completion separator for units in siunitx.el. |
|
Date: |
Sun, 02 Nov 2014 03:11:45 +0000 |
monnier pushed a commit to branch externals/auctex
in repository elpa.
commit efbd5ff2b06b2724c51b7f85d575cb1add8193ab
Author: Mosè Giordano <address@hidden>
Date: Sat May 10 12:49:21 2014 +0200
Use TeX-esc as completion separator for units in siunitx.el.
* style/siunitx.el: Update copyright years and specify last
`siunitx' version supported. Hard wrap lines longer than 80
columns.
(LaTeX-siunitx-regexp): Move the escape character out of the group
matching the unit name.
(LaTeX-arg-siunitx-unit): Add `prefix' argument. Replace the
space with `TeX-esc' as the completion separator.
(LaTeX-arg-define-siunitx-unit): Define a default prompt; set
`initial-input' to nil; use `TeX-esc' as prefix to the given
input.
("siunitx"): Remove the escape character from the unit names.
---
ChangeLog | 14 ++
style/siunitx.el | 578 ++++++++++++++++++++++++++++--------------------------
2 files changed, 311 insertions(+), 281 deletions(-)
diff --git a/ChangeLog b/ChangeLog
index 55de221..b607b40 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -1,3 +1,17 @@
+2014-05-10 Mos� Giordano <address@hidden>
+
+ * style/siunitx.el: Update copyright years and specify last
+ `siunitx' version supported. Hard wrap lines longer than 80
+ columns.
+ (LaTeX-siunitx-regexp): Move the escape character out of the group
+ matching the unit name.
+ (LaTeX-arg-siunitx-unit): Add `prefix' argument. Replace the
+ space with `TeX-esc' as the completion separator.
+ (LaTeX-arg-define-siunitx-unit): Define a default prompt; set
+ `initial-input' to nil; use `TeX-esc' as prefix to the given
+ input.
+ ("siunitx"): Remove the escape character from the unit names.
+
2014-05-02 Jobst Hoffmann <address@hidden> (tiny change)
* style/listings.el ("listings"): Fix typo.
diff --git a/style/siunitx.el b/style/siunitx.el
index fbf2d89..aa73bba 100644
--- a/style/siunitx.el
+++ b/style/siunitx.el
@@ -1,6 +1,6 @@
-;;; siunitx.el --- AUCTeX style for `siunitx.sty' version 2.5q.
+;;; siunitx.el --- AUCTeX style for `siunitx.sty' version 2.5s.
-;; Copyright (C) 2012-2013 Free Software Foundation, Inc.
+;; Copyright (C) 2012-2014 Free Software Foundation, Inc.
;; Maintainer: address@hidden
;; Author: Mosè Giordano <address@hidden>
@@ -25,7 +25,7 @@
;;; Commentary:
-;; This file adds support for `siunitx.sty' version 2.5q.
+;; This file adds support for `siunitx.sty' version 2.5s.
;;; Code:
@@ -36,8 +36,9 @@
;; wrapped in `[...]'.
(defvar LaTeX-siunitx-regexp
(concat "\\\\Declare"
-
"\\(?:SIUnit\\|SIPrefix\\|BinaryPrefix\\|SIPostPower\\|SIPrepower\\|SIQualifier\\)"
- "[ \t\n\r]*\\(?:\\[.*\\]\\)?[ \t\n\r]*{?\\(\\\\[A-Za-z]+\\)}?")
+ "\\(?:SIUnit\\|SIPrefix\\|BinaryPrefix\\|SIPostPower\\|SIPrepower\\|"
+ "SIQualifier\\)"
+ "[ \t\n\r]*\\(?:\\[.*\\]\\)?[ \t\n\r]*{?\\\\\\([A-Za-z]+\\)}?")
"Matches new siunitx unit, prefix, power, and qualifier definitions.")
(defvar LaTeX-auto-siunitx-unit nil
@@ -60,39 +61,43 @@
(defvar LaTeX-siunitx-unit-history nil
"History of units in siunitx.")
-(defun LaTeX-arg-siunitx-unit (optional &optional prompt initial-input
definition)
+(defun LaTeX-arg-siunitx-unit (optional &optional prompt initial-input
+ definition prefix)
"Prompt for siunitx units, prefixes, powers, and qualifiers.
If OPTIONAL is non-nil, insert the resulting value as an optional
argument, otherwise as a mandatory one. Use PROMPT as the prompt
string. If INITIAL-INPUT is non-nil, insert it in the minibuffer
initially, with point positioned at the end. If DEFINITION is
-non-nil, add the chosen unit to the list of defined units."
+non-nil, add the chosen unit to the list of defined units. If
+PREFIX is non-nil, insert it before the given input."
;; Remove <SPC> key binding from map used in `TeX-completing-read-multiple'
;; with `require-match' set to `nil' (it's `crm-local-completion-map' if
;; `completing-read-multiple' is bound, `minibuffer-local-completion-map'
- ;; otherwise) and set completion separator to <SPC>.
+ ;; otherwise) and set completion separator to the TeX escape character.
(let* ((crm-local-completion-map
(remove (assoc 32 crm-local-completion-map) crm-local-completion-map))
(minibuffer-local-completion-map
(remove (assoc 32 minibuffer-local-completion-map)
minibuffer-local-completion-map))
- (crm-separator " ")
+ (crm-separator (regexp-quote TeX-esc))
(unit (mapconcat 'identity
(TeX-completing-read-multiple
- (TeX-argument-prompt optional prompt "Unit")
+ (TeX-argument-prompt optional prompt "Unit: " t)
(LaTeX-siunitx-unit-list) nil nil initial-input
'LaTeX-siunitx-unit-history)
- crm-separator)))
+ TeX-esc)))
(if (and definition (not (string-equal "" unit)))
- (LaTeX-add-siunitx-units unit))
- (TeX-argument-insert unit optional)))
+ (LaTeX-add-siunitx-units unit))
+ (TeX-argument-insert unit optional prefix)))
(defun LaTeX-arg-define-siunitx-unit (optional &optional prompt)
"Prompt for a LaTeX siunitx unit, prefix, power, and qualifier.
If OPTIONAL is non-nil, insert the resulting value as an optional
argument, otherwise as a mandatory one. Use PROMPT as the prompt
string."
- (LaTeX-arg-siunitx-unit optional prompt "\\" t))
+ (LaTeX-arg-siunitx-unit optional
+ (unless prompt (concat "Unit: " TeX-esc))
+ nil t TeX-esc))
(defvar LaTeX-siunitx-package-options
'(;; Detecting fonts
@@ -204,7 +209,8 @@ string."
("literal-superscript-as-power" ("true" "false"))
("inter-unit-product")
("parse-units" ("true" "false"))
- ("per-mode" ("reciprocal" "fraction" "reciprocal-positive-first" "symbol"
"repeated-symbol" "symbol-or-fraction"))
+ ("per-mode" ("reciprocal" "fraction" "reciprocal-positive-first" "symbol"
+ "repeated-symbol" "symbol-or-fraction"))
("per-symbol")
("power-font" ("number" "unit"))
("prefixes-as-symbols" ("true" "false"))
@@ -217,7 +223,8 @@ string."
("list-units" ("brackets" "repeat" "single"))
("multi-part-units" ("brackets" "repeat" "single"))
("number-unit-product")
- ("product-units" ("repeat" "brackets" "brackets-power" "power" "repeat"
"single"))
+ ("product-units" ("repeat" "brackets" "brackets-power" "power" "repeat"
+ "single"))
("range-units" ("brackets" "repeat" "single"))
;; Tabular material
("table-align-comparator" ("true" "false"))
@@ -273,20 +280,27 @@ string."
'("ang" [TeX-arg-key-val LaTeX-siunitx-package-options] "Angle")
'("num" [TeX-arg-key-val LaTeX-siunitx-package-options] "Number")
'("numlist" [TeX-arg-key-val LaTeX-siunitx-package-options] "Numbers")
- '("numrange" [TeX-arg-key-val LaTeX-siunitx-package-options] "Number 1"
"Number 2")
+ '("numrange" [TeX-arg-key-val LaTeX-siunitx-package-options]
+ "Number 1" "Number 2")
;; Units
'("si" [TeX-arg-key-val LaTeX-siunitx-package-options]
LaTeX-arg-siunitx-unit)
- '("SI" [TeX-arg-key-val LaTeX-siunitx-package-options] "Value" [
"Pre-unit"] LaTeX-arg-siunitx-unit)
- '("SIlist" [TeX-arg-key-val LaTeX-siunitx-package-options] "Values"
LaTeX-arg-siunitx-unit)
- '("SIrange" [TeX-arg-key-val LaTeX-siunitx-package-options] "Value 1"
"Value 2" LaTeX-arg-siunitx-unit)
+ '("SI" [TeX-arg-key-val LaTeX-siunitx-package-options]
+ "Value" [ "Pre-unit"] LaTeX-arg-siunitx-unit)
+ '("SIlist" [TeX-arg-key-val LaTeX-siunitx-package-options]
+ "Values" LaTeX-arg-siunitx-unit)
+ '("SIrange" [TeX-arg-key-val LaTeX-siunitx-package-options]
+ "Value 1" "Value 2" LaTeX-arg-siunitx-unit)
;; Settings
'("sisetup" (TeX-arg-key-val LaTeX-siunitx-package-options))
;; Tabular material
'("tablenum" [TeX-arg-key-val LaTeX-siunitx-package-options] "Number")
;; Creating new macros (`DeclareSIUnitWithOptions' macro is deprecated)
- '("DeclareSIUnit" [TeX-arg-key-val LaTeX-siunitx-package-options]
(LaTeX-arg-define-siunitx-unit) "Symbol")
- '("DeclareSIPrefix" (LaTeX-arg-define-siunitx-unit "Prefix") "Symbol"
"Powers of 10")
- '("DeclareBinaryPrefix" (LaTeX-arg-define-siunitx-unit "Prefix") "Symbol"
"Powers of 2")
+ '("DeclareSIUnit" [TeX-arg-key-val LaTeX-siunitx-package-options]
+ (LaTeX-arg-define-siunitx-unit) "Symbol")
+ '("DeclareSIPrefix" (LaTeX-arg-define-siunitx-unit "Prefix")
+ "Symbol" "Powers of 10")
+ '("DeclareBinaryPrefix" (LaTeX-arg-define-siunitx-unit "Prefix")
+ "Symbol" "Powers of 2")
'("DeclareSIPostPower" (LaTeX-arg-define-siunitx-unit "Name") "Power")
'("DeclareSIPrePower" (LaTeX-arg-define-siunitx-unit "Name") "Power")
'("DeclareSIQualifier" (LaTeX-arg-define-siunitx-unit "Qualifier")
"Symbol")
@@ -297,281 +311,283 @@ string."
;;; The unit macros
;; SI base units
(LaTeX-add-siunitx-units
- "\\ampere"
- "\\candela"
- "\\kelvin"
- "\\kilogram"
- "\\gram"
- "\\meter"
- "\\metre"
- "\\second"
+ "ampere"
+ "candela"
+ "kelvin"
+ "kilogram"
+ "gram"
+ "meter"
+ "metre"
+ "second"
;; Coherent derived units in the SI with special names and symbols
- "\\becquerel"
- "\\celsius"
- "\\degreeCelsius"
- "\\coulomb"
- "\\farad"
- "\\gray"
- "\\hertz"
- "\\henry"
- "\\joule"
- "\\katal"
- "\\lumen"
- "\\lux"
- "\\newton"
- "\\ohm"
- "\\pascal"
- "\\radian"
- "\\siemens"
- "\\sievert"
- "\\steradian"
- "\\tesla"
- "\\volt"
- "\\watt"
- "\\weber"
+ "becquerel"
+ "celsius"
+ "degreeCelsius"
+ "coulomb"
+ "farad"
+ "gray"
+ "hertz"
+ "henry"
+ "joule"
+ "katal"
+ "lumen"
+ "lux"
+ "newton"
+ "ohm"
+ "pascal"
+ "radian"
+ "siemens"
+ "sievert"
+ "steradian"
+ "tesla"
+ "volt"
+ "watt"
+ "weber"
;; Non-SI units accepted for use with the International System of Units
- "\\day"
- "\\degree"
- "\\hectare"
- "\\hour"
- "\\liter"
- "\\litre"
- "\\arcminute"
- "\\minute"
- "\\arcsecond"
- "\\tonne"
+ "day"
+ "degree"
+ "hectare"
+ "hour"
+ "liter"
+ "litre"
+ "arcminute"
+ "minute"
+ "arcsecond"
+ "tonne"
;; Non-SI units whose values in SI units must be obtained experimentally
- "\\astronomicalunit"
- "\\atomicmassunit"
- "\\bohr"
- "\\clight"
- "\\dalton"
- "\\electronmass"
- "\\electronvolt"
- "\\elementarycharge"
- "\\hartree"
- "\\planckbar"
+ "astronomicalunit"
+ "atomicmassunit"
+ "bohr"
+ "clight"
+ "dalton"
+ "electronmass"
+ "electronvolt"
+ "elementarycharge"
+ "hartree"
+ "planckbar"
;; Other non-SI units.
- "\\angstrom"
- "\\bar"
- "\\barn"
- "\\bel"
- "\\decibel"
- "\\knot"
- "\\mmHg"
- "\\nauticalmile"
- "\\neper"
- "\\percent"
+ "angstrom"
+ "bar"
+ "barn"
+ "bel"
+ "decibel"
+ "knot"
+ "mmHg"
+ "nauticalmile"
+ "neper"
+ "percent"
;; SI prefixes
- "\\yocto"
- "\\zepto"
- "\\atto"
- "\\femto"
- "\\pico"
- "\\nano"
- "\\micro"
- "\\milli"
- "\\centi"
- "\\deci"
- "\\deca"
- "\\deka"
- "\\hecto"
- "\\kilo"
- "\\mega"
- "\\giga"
- "\\tera"
- "\\peta"
- "\\exa"
- "\\zetta"
- "\\yotta"
+ "yocto"
+ "zepto"
+ "atto"
+ "femto"
+ "pico"
+ "nano"
+ "micro"
+ "milli"
+ "centi"
+ "deci"
+ "deca"
+ "deka"
+ "hecto"
+ "kilo"
+ "mega"
+ "giga"
+ "tera"
+ "peta"
+ "exa"
+ "zetta"
+ "yotta"
;; Powers
- "\\square"
- "\\squared"
- "\\cubic"
- "\\cubed"
- "\\tothe"
- "\\raiseto"
- "\\per"
- "\\of")
+ "square"
+ "squared"
+ "cubic"
+ "cubed"
+ "tothe"
+ "raiseto"
+ "per"
+ "of")
;; Abbreviated units (available unless `abbreviations' option is set to
`false')
(unless (LaTeX-provided-package-options-member "siunitx"
"abbreviations=false")
(LaTeX-add-siunitx-units
- "\\fg"
- "\\pg"
- "\\ng"
- "\\ug"
- "\\mg"
- "\\g"
- "\\kg"
- "\\amu"
- "\\pm"
- "\\nm"
- "\\um"
- "\\mm"
- "\\cm"
- "\\dm"
- "\\m"
- "\\km"
- "\\as"
- "\\fs"
- "\\ps"
- "\\ns"
- "\\us"
- "\\ms"
- "\\s"
- "\\fmol"
- "\\pmol"
- "\\nmol"
- "\\umol"
- "\\mmol"
- "\\mol"
- "\\kmol"
- "\\pA"
- "\\nA"
- "\\uA"
- "\\mA"
- "\\A"
- "\\kA"
- "\\ul"
- "\\ml"
- "\\l"
- "\\hl"
- "\\uL"
- "\\mL"
- "\\L"
- "\\hL"
- "\\mHz"
- "\\Hz"
- "\\kHz"
- "\\MHz"
- "\\GHz"
- "\\THz"
- "\\N"
- "\\mN"
- "\\kN"
- "\\MN"
- "\\Pa"
- "\\kPa"
- "\\MPa"
- "\\GPa"
- "\\mohm"
- "\\kohm"
- "\\Mohm"
- "\\pV"
- "\\nV"
- "\\uV"
- "\\mV"
- "\\V"
- "\\kV"
- "\\uW"
- "\\mW"
- "\\W"
- "\\kW"
- "\\MW"
- "\\GW"
- "\\J"
- "\\kJ"
- "\\meV"
- "\\keV"
- "\\MeV"
- "\\GeV"
- "\\TeV"
- "\\kWh"
- "\\F"
- "\\fF"
- "\\pF"
- "\\K"
- "\\dB"))
+ "fg"
+ "pg"
+ "ng"
+ "ug"
+ "mg"
+ "g"
+ "kg"
+ "amu"
+ "pm"
+ "nm"
+ "um"
+ "mm"
+ "cm"
+ "dm"
+ "m"
+ "km"
+ "as"
+ "fs"
+ "ps"
+ "ns"
+ "us"
+ "ms"
+ "s"
+ "fmol"
+ "pmol"
+ "nmol"
+ "umol"
+ "mmol"
+ "mol"
+ "kmol"
+ "pA"
+ "nA"
+ "uA"
+ "mA"
+ "A"
+ "kA"
+ "ul"
+ "ml"
+ "l"
+ "hl"
+ "uL"
+ "mL"
+ "L"
+ "hL"
+ "mHz"
+ "Hz"
+ "kHz"
+ "MHz"
+ "GHz"
+ "THz"
+ "N"
+ "mN"
+ "kN"
+ "MN"
+ "Pa"
+ "kPa"
+ "MPa"
+ "GPa"
+ "mohm"
+ "kohm"
+ "Mohm"
+ "pV"
+ "nV"
+ "uV"
+ "mV"
+ "V"
+ "kV"
+ "uW"
+ "mW"
+ "W"
+ "kW"
+ "MW"
+ "GW"
+ "J"
+ "kJ"
+ "meV"
+ "keV"
+ "MeV"
+ "GeV"
+ "TeV"
+ "kWh"
+ "F"
+ "fF"
+ "pF"
+ "K"
+ "dB"))
;; Binary prefixes and units available when `binary-units' option is used
(when (or (LaTeX-provided-package-options-member "siunitx" "binary-units")
(LaTeX-provided-package-options-member "siunitx"
"binary-units=true"))
(LaTeX-add-siunitx-units
- "\\kibi"
- "\\mebi"
- "\\gibi"
- "\\tebi"
- "\\pebi"
- "\\exbi"
- "\\zebi"
- "\\yobi"
- "\\bit"
- "\\byte"))
+ "kibi"
+ "mebi"
+ "gibi"
+ "tebi"
+ "pebi"
+ "exbi"
+ "zebi"
+ "yobi"
+ "bit"
+ "byte"))
;; Symbols
(LaTeX-add-siunitx-units
- "\\SIUnitSymbolAngstrom"
- "\\SIUnitSymbolArcminute"
- "\\SIUnitSymbolArcsecond"
- "\\SIUnitSymbolCelsius"
- "\\SIUnitSymbolDegree"
- "\\SIUnitSymbolMicro"
- "\\SIUnitSymbolOhm")
+ "SIUnitSymbolAngstrom"
+ "SIUnitSymbolArcminute"
+ "SIUnitSymbolArcsecond"
+ "SIUnitSymbolCelsius"
+ "SIUnitSymbolDegree"
+ "SIUnitSymbolMicro"
+ "SIUnitSymbolOhm")
;; Macros available when `version-1-compatibility' option is used
- (when (or (LaTeX-provided-package-options-member "siunitx"
"version-1-compatibility")
- (LaTeX-provided-package-options-member "siunitx"
"version-1-compatibility=true"))
+ (when (or (LaTeX-provided-package-options-member
+ "siunitx" "version-1-compatibility")
+ (LaTeX-provided-package-options-member
+ "siunitx" "version-1-compatibility=true"))
(LaTeX-add-siunitx-units
- "\\Square"
- "\\ssquare"
- "\\BAR"
- "\\bbar"
- "\\Day"
- "\\dday"
- "\\Gray"
- "\\ggray"
- "\\atomicmass"
- "\\arcmin"
- "\\arcsec"
- "\\are"
- "\\curie"
- "\\gal"
- "\\millibar"
- "\\rad"
- "\\rem"
- "\\roentgen"
- "\\micA"
- "\\micmol"
- "\\micl"
- "\\micL"
- "\\nanog"
- "\\micg"
- "\\picm"
- "\\micm"
- "\\Sec"
- "\\mics"
- "\\cmc"
- "\\dmc"
- "\\cms"
- "\\centimetrecubed"
- "\\centimetresquared"
- "\\cubiccentimetre"
- "\\cubicdecimetre"
- "\\squarecentimetre"
- "\\squaremetre"
- "\\squarekilometre"
- "\\parsec"
- "\\lightyear"
- "\\gmol"
- "\\kgmol"
- "\\lbmol"
- "\\molar"
- "\\Molar"
- "\\torr"
- "\\gon"
- "\\micron"
- "\\mrad"
- "\\gauss"
- "\\eVperc"
- "\\nanobarn"
- "\\picobarn"
- "\\femtobarn"
- "\\attobarn"
- "\\zeptobarn"
- "\\yoctobarn"
- "\\nb"
- "\\pb"
- "\\fb"
- "\\ab"
- "\\zb"
- "\\yb"))
+ "Square"
+ "ssquare"
+ "BAR"
+ "bbar"
+ "Day"
+ "dday"
+ "Gray"
+ "ggray"
+ "atomicmass"
+ "arcmin"
+ "arcsec"
+ "are"
+ "curie"
+ "gal"
+ "millibar"
+ "rad"
+ "rem"
+ "roentgen"
+ "micA"
+ "micmol"
+ "micl"
+ "micL"
+ "nanog"
+ "micg"
+ "picm"
+ "micm"
+ "Sec"
+ "mics"
+ "cmc"
+ "dmc"
+ "cms"
+ "centimetrecubed"
+ "centimetresquared"
+ "cubiccentimetre"
+ "cubicdecimetre"
+ "squarecentimetre"
+ "squaremetre"
+ "squarekilometre"
+ "parsec"
+ "lightyear"
+ "gmol"
+ "kgmol"
+ "lbmol"
+ "molar"
+ "Molar"
+ "torr"
+ "gon"
+ "micron"
+ "mrad"
+ "gauss"
+ "eVperc"
+ "nanobarn"
+ "picobarn"
+ "femtobarn"
+ "attobarn"
+ "zeptobarn"
+ "yoctobarn"
+ "nb"
+ "pb"
+ "fb"
+ "ab"
+ "zb"
+ "yb"))
(TeX-run-style-hooks "l3keys2e"
"array"
"amstext"
- [elpa] 243/299: Fix fontification of optional argument to verbatim environments., (continued)
- [elpa] 243/299: Fix fontification of optional argument to verbatim environments., Stefan Monnier, 2014/11/01
- [elpa] 238/299: Use LaTeX-biblatex-use-Biber to manually select bibliography processor., Stefan Monnier, 2014/11/01
- [elpa] 246/299: Make style/babel.el file non-executable., Stefan Monnier, 2014/11/01
- [elpa] 234/299: Ask for TeX-master if unknown., Stefan Monnier, 2014/11/01
- [elpa] 244/299: Fix typo in listings.el., Stefan Monnier, 2014/11/01
- [elpa] 237/299: Update biblatex support in style file., Stefan Monnier, 2014/11/01
- [elpa] 250/299: Add TeX-previous-error to Command menu., Stefan Monnier, 2014/11/01
- [elpa] 247/299: Convert font-latex-fontify-sectioning to float when used as a number., Stefan Monnier, 2014/11/01
- [elpa] 252/299: Fix possible infinite loop in TeX-parse-all-errors., Stefan Monnier, 2014/11/01
- [elpa] 249/299: Backport from ELPA repository., Stefan Monnier, 2014/11/01
- [elpa] 245/299: Use TeX-esc as completion separator for units in siunitx.el.,
Stefan Monnier <=
- [elpa] 253/299: Cater for bad boxes in error descriptions., Stefan Monnier, 2014/11/01
- [elpa] 257/299: Fix TeX-find-display-help., Stefan Monnier, 2014/11/01
- [elpa] 251/299: Color TeX Help buffer., Stefan Monnier, 2014/11/01
- [elpa] 255/299: Better check for mgs., Stefan Monnier, 2014/11/01
- [elpa] 258/299: Prettify file names in error overview., Stefan Monnier, 2014/11/01
- [elpa] 259/299: Update Future Development section in manual., Stefan Monnier, 2014/11/01
- [elpa] 254/299: Simplify error finding and help displaying functions., Stefan Monnier, 2014/11/01
- [elpa] 263/299: Fix remaining XEmacs compilation issues., Stefan Monnier, 2014/11/01
- [elpa] 260/299: Improve selection of the forward/inverse search method., Stefan Monnier, 2014/11/01
- [elpa] 262/299: Fix some XEmacs compilation issues., Stefan Monnier, 2014/11/01