[Orgmode] Using Org-Mode Table Formatting Functions draft

[Jason Riedy]

#+TITLE: Using Org-Mode Table Formatting Functions
#+AUTHOR: Jason Riedy
#+EMAIL: address@hidden
#+LANGUAGE: en
#+TEXT: *Abstract:* Org-mode's ability to slice one table into many
#+TEXT: separately formatted destinations helps keep documentation
#+TEXT: and data in sync.  We provide an example using both the
#+TEXT: multiple-target facilities and formatting with functions.
#+TEXT: Side-effects in the functions gather header data necessary
#+TEXT: for generating flexible SQL insertion statements.

I'm not asking for this to be in Worg yet; it uses the patches
I just sent.  ;)

* Introduction

In large-scale data analysis, one often associates integers with
parameter name rather than strings.  The performance and storage
difference is significant for multi-gigabyte data sets.  But
integers are not at all convenient or descriptive.
Systems like [[http://www.r-project.org][R]] provide a =factor= data type that 
translates the
stored integers into user-level strings.
Emulating that construct in SQL is handy for data transfer with 
[[http://www.sqlite.org][SQLite]]
or out-of-core analysis in R using a 
[[http://cran.r-project.org/web/packages/SQLiteDF/index.html][SQL back-end]].
That leaves the problem of maintaining a registry of integer level
codes, string names, and documentation.

[[http://orgmode.org][Org-mode]] provide a fast, light-weight table mechanism 
that can be sent
in email, bundled with code, or embedded in documentation.  The tables
can be transformed and placed elsewhere.  It sounds like a perfect
registry, generating documentation and code from one data table.
Similar techniques could be used in a multi-lingual document to store
many translations in one table and send them to sections in specific
languages.

We start with a simple table:
#+ORGTBL: SEND exdoc orgtbl-to-orgtbl :skipcols (2) :fmt (1 "=%s=") :hfmt (1 
"%s")
#+ORGTBL: SEND exsql orgtbl-to-sqlinsert :sqlname "extbl" :fmt (2 "%s") :tstart 
"#+BEGIN_EXAMPLE\nBEGIN TRANSACTION;" :tend "COMMIT;\n#+END_EXAMPLE"
| Name  | Level | Description     |
|-------+-------+-----------------|
| normx |     1 | norm(x, \infty) |
| normb |     2 | norm(b, \infty) |
| normA |     3 | norm(A, \infty) |

That one source table contains the documentation in the first and
third column:
#+BEGIN RECEIVE ORGTBL exdoc
| Name | Description |
|---
| =normx= | norm(x, \infty) |
| =normb= | norm(b, \infty) |
| =normA= | norm(A, \infty) |
#+END RECEIVE ORGTBL exdoc

The first two columns of the source table provide the data we must
transfer the SQL.  The third column can be used to embed some
documentation into the table itself after the string is sanitized for
SQL.  The remaining necessary information, the SQL destination table
name, can be provided as a parameter to =#+ORGTBL: SEND=, producing
the following code chunk:
#+BEGIN RECEIVE ORGTBL exsql
#+BEGIN_EXAMPLE
BEGIN TRANSACTION;
INSERT INTO extbl( Name, Level, Description ) VALUES ( 'normx' , 1 , 'norm(x, 
infty)' );
INSERT INTO extbl( Name, Level, Description ) VALUES ( 'normb' , 2 , 'norm(b, 
infty)' );
INSERT INTO extbl( Name, Level, Description ) VALUES ( 'normA' , 3 , 'norm(A, 
infty)' );
COMMIT;
#+END_EXAMPLE
#+END RECEIVE ORGTBL exsql

We will explain the parameters used to produce both outputs.  The SQL
insertion statements use functions as formatting parameters, some of
which are called purely for the side-effect of gathering the header
fields.  The SQL-generating code is distributed with org-mode in
=contrib/lisp/orgtbl-sqlinsert.el=.

* Specifying multiple destinations for a single table

Sending one table to multiple destinations is straight-forward.  Add
one =SEND= directive for each destination.  For example, the first
table has the following two directives prepended, with parameters
described later:
: #+ORGTBL: SEND exdoc orgtbl-to-orgtbl ...
: #+ORGTBL: SEND exsql orgtbl-to-sqlinsert ...

The documentation removes the second column and adds fiddly formatting
parameters with
: :skipcols (2) :fmt (1 "=%s=") :hfmt (1 "%s")

The SQL-generating line gathers the destination table name and passes
integers through unchanged with the parameters
: :sqlname "extbl" :fmt (2 "%s")
The SQL table name defaults to the name of the target, =exsql= in this
case.  And the default formatting used for
other columns is =orgtbl-sql-strip-and-quote=.  That routine only
removes potentially non-portable constructs; it is not designed to
prevent insertion attacks.
We could apply =orgtbl-sql-strip-and-quote= to the first column of the
documentation table to ensure the strings match exactly, but it
easier to use simple, non-mangled strings as names.

By default, a block of insertions is wrapped in =BEGIN TRANSACTION=
and =COMMIT= statements.  These can be supressed by setting =:tstart=
and =:tend= to =nil=.  The example used in this document uses a
"double-embedding" trick to wrap the statement in an org-mode code block:
: :tstart "#+BEGIN_EXAMPLE\nBEGIN TRANSACTION;"
: :tend "COMMIT;\n#+END_EXAMPLE"
Similar wrapping can embed the SQL statements into literate programs.
There is built-in support for [[http://www.eecs.harvard.edu/nr/noweb/][Noweb]] 
with the =:nowebname= parameter.
Setting =:nowebname= to a string wraps the insertions in a Noweb code
chunk named with the string.

* Formatting with functions for side effects and display

The =orgtbl-to-sqlinsert= routine calls =orgtbl-to-generic= for all
the generic table parsing.  The parameters provide an example of using
functions for gathering data as well as formatting.  Emacs Lisp's
dynamic binding allows manipulating any symbols in the current
environment, so the formatting functions do not need to pass
parameters through the outer functions.

The default =:tstart= parameter is one example used strictly for
formatting.  After the =:nowebname= parameter is decoded and bound to
=nowebname=, it can be checked within a thunk to produce the starting
string:
: :tstart (lambda () (concat (if nowebname
:                                (format "<<%s>>= \n" nowebname)
:                              "")
:                            "BEGIN TRANSACTION;"))

The functions need not be pure.  The header formatting gathers the
first header line into the variable =hdrlist= with
: :hfmt (lambda (f) (progn (if firstheader (push f hdrlist)) ""))
Then each line is preceded with a function that uses =hdrlist= to
ensure data values are associated with named columns rather than just
positions.
: :lstart (lambda () (concat "INSERT INTO "
:                            sqlname "( "
:                            (mapconcat 'identity (reverse hdrlist)
:                                       ", ")
:                            " )" (if breakvals "\n" " ")
:                                     "VALUES ( "))

Note that =orgtbl-to-sqlinsert= takes advantage of org-mode's applying
the formatting to each cell /before/ checking for a line-formatting
function.  The header line itself and sectioning line are suppressed
with the settings
: :hlfmt (lambda (lst) (setq firstheader nil))
: :hline nil
: :remove-nil-lines t

Similar techniques could be used to generate a table's SQL definition
from the second header line.

* Current limitations

One current limitation is that all the tables are in the same Emacs
buffer and hence the same text file.  A literate programming mechanism
like [[http://www.eecs.harvard.edu/nr/noweb/][Noweb]] can separate the chunks.

Also, the tables must be sent manually.  Writing a function that scans
an entire buffer for all =SEND= and =RECEIVE= pairs is feasible, as is
using 
[[http://www.gnu.org/software/emacs/elisp/html_node/Overlays.html][overlays]] 
to manage automatic updates.