On 28/02/2011 11:24, Rainer M Krug wrote:
On Mon, Feb 28, 2011 at 8:07 AM, Ben Ward<address@hidden>
wrote:
On Sun, 2011-02-27 at 21:35 -0800, Dan Davison wrote:
Ben Ward<address@hidden> writes:
Hi,
I recently installed emacs, org-mode fresh on a new install of Arch
Linux. Before I had it working on Ubuntu.
I've installed everything as before and used the same .emacs file I
had,
but if I use org to write out some R script and export to pdf via
latex,
then I get an empty pdf document, with only the title and Contents
heading. However if I export to anything else such as html it
works, and
shows me code and results.
Hi Ben,
Are you sure this problem concerns babel/R? What happens when you
export
an Org document to pdf without any babel stuff?
Can you provide an example Org file that you are having trouble
exporting to pdf? The problem is probably in your local configuration,
so if no-one can jump to the solution then start from a minimal working
config and try to find the part of your .emacs which is causing the
problem.
Dan
Hi, I've tried exporting an org file that has no code in it to PDF and
it works without any trouble.
The file I'm trying to export is:
#+TITLE: Test
#+AUTHOR: Ben J. Ward
#+LATEX_CLASS: article
#+BABEL: :session *R* :results output
\pagebreak
Test:
#+begin_src R :exports both
x<-c(1,2,3,4,5)
y<-c(5,10,15,20)
x
y
xy<-(x*y)
xy
#+end_src
When I use your example and export it to LaTeX,
I get this:
#########################################
% Created 2011-02-28 Mon 12:21
\documentclass[11pt]{article}
\usepackage[utf8]{inputenc}
\usepackage[T1]{fontenc}
\usepackage{fixltx2e}
\usepackage{graphicx}
\usepackage{longtable}
\usepackage{float}
\usepackage{wrapfig}
\usepackage{soul}
\usepackage{textcomp}
\usepackage{marvosym}
\usepackage{wasysym}
\usepackage{latexsym}
\usepackage{amssymb}
\usepackage{hyperref}
\tolerance=1000
\usepackage{color}
\usepackage{listings}
\providecommand{\alert}[1]{\textbf{#1}}
\begin{document}
\title{Test}
\author{Ben J. Ward}
\date{28 February 2011}
\maketitle
\setcounter{tocdepth}{3}
\tableofcontents
\vspace*{1cm}
The file I'm trying to export is:
\pagebreak
Test:
\lstset{language=R}
\begin{lstlisting}
x<-c(1,2,3,4,5)
y<-c(5,10,15,20)
x
y
xy<-(x*y)
xy
\end{lstlisting}
\begin{verbatim}
[1] 1 2 3 4 5
[1] 5 10 15 20
Warning message:
In x * y : longer object length is not a multiple of shorter object
length
[1] 5 20 45 80 25
\end{verbatim}
\end{document}
#########################################
So it works for me - have you tried to export to LaTex? If that works,
it is a LaTeX / pdf issue.
Rainer
Hi, I've just tried and I still get the same as before, but it works to
latex, when there is no src code chunks.
This is my .emacs:
(require 'ess-site)
(require 'org-install)
(add-to-list 'auto-mode-alist '("\\.org\\'" . org-mode))
(global-set-key "\C-cl" 'org-store-link)
(global-set-key "\C-cc" 'org-capture)
(global-set-key "\C-ca" 'org-agenda)
(global-set-key "\C-cb" 'org-iswitchb)
(transient-mark-mode 1)
(org-babel-do-load-languages
'org-babel-load-languages
'((R . t)
(emacs-lisp . t)
))
(custom-set-variables
;; custom-set-variables was added by Custom.
;; If you edit it by hand, you could mess it up, so be careful.
;; Your init file should contain only one such instance.
;; If there is more than one, they won't work right.
'(org-confirm-babel-evaluate nil))
(custom-set-faces
;; custom-set-faces was added by Custom.
;; If you edit it by hand, you could mess it up, so be careful.
;; Your init file should contain only one such instance.
;; If there is more than one, they won't work right.
)
Thanks,
Ben W.
I can include my .emacs although it's lengthy.
I uninstalled all of my emacs stuff, and installed it from the vanilla
downloads on their respective sites, and I'm still getting the same
result. I'm considering removing all my tex stuff and installing the
vanilla texlive too.
Thanks,
Ben W.
I've tried even installing a version of org
mode from source, using the build system my distro has, so as it's
made
and installed to exactly the right place, but I still don't have any
luck. The texlive version I'm using is from my distro's package
manager.
Using C-c C-c to evaluate on the fly works. I had an issue getting org
and babel to work with R on Windows 7 as well, but it was because
certain tex packages were missing and I recieved a message when I
tried
to export, but nothing comes up here.
Would the recent change:
Org-babel is now inside org, remove (require 'org-babel-init)
and alike from your .emacs.
Look at http://orgmode.org/Changes.html#ob-configuration-changes
for overview of the settings.
Be causing the entire issue?
The .tex file I get out is thus:
% Created 2011-02-28 Mon 03:47
\documentclass[11pt]{article}
\usepackage[utf8]{inputenc}
\usepackage[T1]{fontenc}
\usepackage{fixltx2e}
\usepackage{graphicx}
\usepackage{longtable}
\usepackage{float}
\usepackage{wrapfig}
\usepackage{soul}
\usepackage{textcomp}
\usepackage{marvosym}
\usepackage{wasysym}
\usepackage{latexsym}
\usepackage{amssymb}
\usepackage{hyperref}
\tolerance=1000
\providecommand{\alert}[1]{\textbf{#1}}
\begin{document}
\title{Test}
\author{Ben J. Ward}
\date{28 February 2011}
\maketitle
\setcounter{tocdepth}{3}
\tableofcontents
\vspace*{1cm}
\end{document}
Thanks,
Ben W.
(Apologies if this has been sent twice, first time an error occured)
_______________________________________________
Emacs-orgmode mailing list
Please use `Reply All' to send replies to the list.
address@hidden
http://lists.gnu.org/mailman/listinfo/emacs-orgmode
_______________________________________________
Emacs-orgmode mailing list
Please use `Reply All' to send replies to the list.
address@hidden
http://lists.gnu.org/mailman/listinfo/emacs-orgmode
_______________________________________________
Emacs-orgmode mailing list
Please use `Reply All' to send replies to the list.
address@hidden
http://lists.gnu.org/mailman/listinfo/emacs-orgmode