Re: [O] Org-mode release 7.9

[Jude DaShiell]

Maybe try wrapping all paths in quotes and try again. On Fri, 24 Aug 2012, 
Rainer Thiel wrote:

> Is there a way to install Org 7.9 under Windows Vista?
> 
> I have written the following local.mk in the Org installation directory:
> 
> -->
> # Name of your emacs binary
> EMACS = emacs.exe
> 
> # Where local software is found
> prefix        = C:/Program Files/Emacs
> 
> # Where local lisp files go.
> lispdir= $(prefix)/site-lisp/org
> 
> # Where local data files go.
> datadir = $(prefix)/etc/org
> 
> # Where info files go.
> infodir = $(prefix)/info
> <--
> 
> Those are the very setting that I used to put in the Makfile in
> previous Org versions.  Now cygwin make fails with the following
> output:
> 
> -->
> make -C doc clean;  make -C lisp clean;
> make[1]: Entering directory `/cygdrive/c/org-7.9/doc'
> rm -f org *.pdf *.html *_letter.tex org-version.inc \
>               *.aux *.cp *.cps *.dvi *.fn *.fns *.ky *.kys *.pg *.pgs \
>               *.toc *.tp *.tps *.vr *.vrs *.log *.html *.ps
> make[1]: Leaving directory `/cygdrive/c/org-7.9/doc'
> make[1]: Entering directory `/cygdrive/c/org-7.9/lisp'
> rm -f org-version.el org-install.el org-version.elc org-install.elc
> rm -f *.elc
> make[1]: Leaving directory `/cygdrive/c/org-7.9/lisp'
> make -C doc all;  make -C etc all;  make -C lisp all;
> make[1]: Entering directory `/cygdrive/c/org-7.9/doc'
> org-version: N/A (N/A)
> makeinfo --no-split org.texi -o org
> makeinfo --html --number-sections --no-split -o org.html org.texi
> ../utils/manfull.pl org.html
> make[1]: ../utils/manfull.pl: Command not found
> make[1]: *** [org.html] Error 127
> make[1]: Leaving directory `/cygdrive/c/org-7.9/doc'
> make[1]: Entering directory `/cygdrive/c/org-7.9/etc'
> make[1]: Nothing to be done for `all'.
> make[1]: Leaving directory `/cygdrive/c/org-7.9/etc'
> make[1]: Entering directory `/cygdrive/c/org-7.9/lisp'
> rm -f org-version.el org-install.el org-version.elc org-install.elc
> org-version: N/A (N/A)
> Loading c:/org-7.9/lisp/org-compat.el (source)...
> Cannot open load file: ../utils/org-fixup.el
> make[1]: *** [org-version.el] Error 255
> make[1]: Leaving directory `/cygdrive/c/org-7.9/lisp'
> make: *** [all] Error 2
> <--
> 
> Can someone help?
> 
> Many thanks in advance
> 
> Rainer Thiel
> 
> 2012/8/24 Bastien <address@hidden>:
> > Hi all,
> >
> > I've released Org 7.9.
> >
> >   http://orgmode.org/org-7.9.zip
> >   http://orgmode.org/org-7.9.gz
> >   http://orgmode.org/org-mode-download.html
> >
> > After 1885 commits since Org 7.8, it was about time.
> >
> > See the list of changes here:
> >
> >   http://orgmode.org/Changes.html
> >
> > I cannot thank all the contributors enough: especially Nicolas, for his
> > great work on org-element.el (among other nice stuff), Achim for the way
> > he patiently rethought the build mechanism (and bared with me when I was
> > being stubborn), Eric for the steady maintainance of Babel, Max for the
> > neat idea of sticky agendas, etc.
> >
> > Here is a list of people to praise for their help:
> >
> > A. Major, Aaron Peromsik, Achim Gratz, Adam Spiers, Aidan Gauland,
> > Albert, Alex Lane, Alexander Willand, Andrew Young, Anthony Lander,
> > Benjamin Motz, Bernt Hansen, Bill Jackson, Bill Wishon, Bjarte Johansen,
> > Brian J. Carlson, Brian Wood, Brian van den Broek, Carsten Dominik,
> > Charles Philip Chan, Charles Sebold, Charles, Charlie Millar, Christoph
> > Lange, Christophe Rhodes, Christopher Schmidt, Daniel Dehennin, Dave
> > Abrahams, David Coate, David Maus, David Niemi, Dov Grobgeld, Du
> > Yanning, Dunib, Elias Assarsson, Eric Abrahamsen, Eric S Fraga, Eric
> > Schulte, Fabrice Pardo, Feiming Chen, Fran?ois Allisson, Fran?ois
> > Pinard, Friedrich Delgado, Giles, Glenn Morris, Greg Troxel, Gsqual,
> > Guido Arnold, Gustav Wikstr?m, Henning Redestig, Ian Barton, Ilya
> > Shlyakhter, Ingo Lohmar, Ivan Kanis, Ivars Finvers, Jack Erwin,
> > Jambunathan, James Harkins, Joe Vornehm Jr., John Hendy, John Wiegley,
> > Jonathan Leech-Pepin, Joost Kremers, Jose E. Marchesi, Joseph Thomas,
> > Karl Berg, Ken Williams, Konstantin Ziegler, Laurynas Biveinis, Leo
> > Alekseyev, Leo and Henning, Loris Bennett, Luis Anaya, Marc-Oliver Ihm,
> > Marcel Van der Boom, Martin Beck, Martyn Jago, Mathias Bauer, Matt
> > Lundin, Michael Heerdegen, Mike McLean, Mike McLean, Mikhail Titov,
> > Mikkel Kristiansen, Moritz Ulrich, Myles English, Nick Dokos, Nicolas
> > Goaziou, Noorul Islam K M, Olaf Dietsche, Paul Eggert, Pawe? Menich,
> > Peter Danenberg, Peter M?nster, Petro Rafael, Rasmus Rempling, Richard
> > Hansen, Richard Stanton, Robert Lupton the Good, Ryan Kaskel, SW, Samuel
> > Wales, Sean O'Halpin, Simon Thum, Stefan Vollmar, Steinar Bang, Steve
> > Revilak, Stuart McLean, Sylvain Rousseau, S?bastien Vauban, T.F. Torrey,
> > Takaaki Ishikawa, Takafumi Arakaki, Tassilo Horn, Thierry Stoehr, Thomas
> > S. Dye, Thomas Wallrafen, Tobias Naehring, Toby Cubitt, Tomas Grigera,
> > Torsten Wagner, Uwe Brauer, Vagn Johansen, Viktor Rosenfeld, Vladimir
> > Lomov, Waldemar Reusch, Yagnesh Raghava Yakkala, Zachary Jones
> >
> > And here are the detailed release notes:
> >
> >
> >                          Release notes of Org 7.9
> >                          ========================
> >
> >
> > New committers who signed the FSF copyright assigment
> > =====================================================
> >
> > Welcome and thanks to these new core contributors:
> >
> > - Andrew Hyatt
> > - Andrzej Lichnerowicz
> > - Ethan Ligon
> > - Feng Shu
> > - George Kettleborough
> > - Henning Dietmar Weiss
> > - Ilya Shlyakhter
> > - Ivan Kanis
> > - Konrad Hinsen
> > - Madan Ramakrishnan
> > - Max Mikhanosha
> > - Moritz Ulrich
> > - Rick Frankel
> > - Toby Cubitt
> >
> > Online documentation for hooks, commands and options
> > ====================================================
> >
> > You can read the documentation for hooks, commands (i.e. interactive
> > functions) and options (i.e. customizable variables) [online].  Clicking on 
> > a
> > command/option in this ChangeLog will take you to the online documentation
> > for that command/option.
> >
> >
> > [online]: http://orgmode.org/worg/doc.html
> >
> > Overview of the new keybindings
> > ===============================
> >
> > ? Keybinding      ? Speedy ? Command                     ?
> > ??????????????????????????????????????????????????????????
> > ? =C?c C?x C?z=   ?        ? org?clock?resolve           ?
> > ? =C?c C?x C?q=   ?        ? org?clock?cancel            ?
> > ? =C?c C?x C?x=   ?        ? org?clock?in?last           ?
> > ? =M?h=           ?        ? org?mark?element            ?
> > ? =*=             ?        ? org?agenda?bulk?mark?all    ?
> > ? =C?c C?M?l=     ?        ? org?insert?all?links        ?
> > ? =C?c C?x C?M?v= ?        ? org?redisplay?inline?images ?
> > ? =C?c C?x E=     ? =E=    ? org?inc?effort              ?
> > ?                 ? =#=    ? org?toggle?comment          ?
> > ?                 ? =:=    ? org?columns                 ?
> > ?                 ? =W=    ? Set =APPT_WARNTIME=         ?
> >
> > New build system and new packages
> > =================================
> >
> > New build system
> > ----------------
> >
> > Achim implemented a new build system.
> >
> > The basic method for installing Org is the same:
> >
> > 1. Download or clone Org.
> > 2. run `make install' from the Org directory.
> > 3. Add (require 'org-install) in your .emacs.el.
> >
> > But the build system is now more flexible and can be more easily
> > adapted to suit your needs.
> >
> > See [http://orgmode.org/worg/dev/org-build-system.html] for details.
> >
> > New packages in core
> > --------------------
> >
> > =org-eshell.el= by Konrad Hinsen is now in Org's core
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >
> > =org-eshell.el= allows you to create links from [Eshell].
> >
> >
> > [Eshell]: 
> > http://www.gnu.org/software/emacs/manual/html_node/eshell/index.html
> >
> > New packages in contrib/
> > ------------------------
> >
> > Note: The =EXPERIMENTAL/= directory has been deleted.  The files
> > have been moved to the =contrib/lisp/= directory.
> >
> > =org-notify.el= by Peter M?nster
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >
> > From the comment section:
> >
> > Get notifications, when there is something to do.
> > Sometimes, you need a reminder a few days before a deadline, e.g. to buy a
> > present for a birthday, and then another notification one hour before to
> > have enough time to choose the right clothes.
> > For other events, e.g. rolling the dustbin to the roadside once per week,
> > you probably need another kind of notification strategy.
> > This package tries to satisfy the various needs.
> >
> > =org-bibtex-extras.el= by Eric Schulte
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >
> > From the comment section:
> >
> > This file add some extra functionality to your bibtex entries which
> > are stored as Org-mode headlines using org-bibtex.el.  Most
> > features expect that you keep all of your reading notes in a single
> > file, set the `obe-bibtex-file' variable to the path to this file.
> >
> > New exporters in contrib/
> > -------------------------
> >
> > Nicolas export engine org-export.el lives in the =contrib/lisp/= directory.
> > To use it:
> >
> > Make sure contrib/lisp/ is in your load-path
> > M-: (require 'org-export) RET
> > M-: (require 'org-e-latex) RET ; or any other library
> > M-x org-export-dispatch RET
> >
> > These are the currently available exporters:
> >
> > - =org-e-ascii.el= by Nicolas
> > - =org-e-beamer.el= by Nicolas
> > - =org-e-groff.el= by Luis Anaya
> > - =org-e-html.el= by Jambunathan
> > - =org-e-latex.el= by Nicolas
> > - =org-e-man.el= by Luis Anaya
> > - =org-e-odt.el= by Jambunathan
> > - =org-e-texinfo.el= by Jonathan Leech-Pepin
> > - =org-md.el= by Nicolas
> >
> > If we have enough testers, the new export engine is very likely to replace
> > the current one for the next major release.  Please report any problem on
> > the mailing list!
> >
> > If you want to write a new export backend based on this export engine,
> > please check the [online documentation].
> >
> >
> > [online documentation]: 
> > http://orgmode.org/worg/dev/org-export-reference.html
> >
> > New Babel languages
> > -------------------
> >
> > Support for execution of Scala code blocks (see lisp/ob-scala.el)
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >
> > Support for execution of IO code blocks (see lisp/ob-io.el)
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >
> > Incompatible changes
> > ====================
> >
> > - The =UTILITIES/= directory has been renamed to =utils/=.
> >
> > - If your code relies on =org-write-agenda=, please use
> >   [org-agenda-write] from now on.
> >
> > - If your code relies on =org-make-link=, please use =concat=
> >   instead.
> >
> > - The default value of [org-table-number-regexp] now allows commas
> >   as the mark to separate decimals from integers in numbers.  If
> >   your code relies on the previous behavior, please customize
> >   this variable.  See the announcement on the mailing list.
> >
> >
> >   [org-agenda-write]: http://orgmode.org/worg/doc.html#org-agenda-write
> >   [org-table-number-regexp]: 
> > http://orgmode.org/worg/doc.html#org-table-number-regexp
> >
> > New features and user-visible changes
> > =====================================
> >
> > Org Element
> > -----------
> >
> > org-element.el is a toolbox for parsing and analysing "elements" in an
> > Org-mode buffer.  This has been written by Nicolas Goaziou and has been
> > tested for quite some time.  It is now part of Org's core and many core
> > functions rely on this package.
> >
> > Two functions might be particularily handy for users: [org-element-at-point]
> > and [org-element-context].  See the docstrings for more details.
> >
> > Below is a list of editing and navigating commands that now rely on
> > org-element.el.
> >
> >
> > [org-element-at-point]: 
> > http://orgmode.org/worg/doc.html#org-element-at-point
> > [org-element-context]: http://orgmode.org/worg/doc.html#org-element-context
> >
> > [org-fill-paragraph] has been completely rewritten
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >
> > The filling mechanisms now rely on org-element, trying to do the right
> > thing on each element in various contexts.  E.g. filling in a list item
> > will preserve indentation; filling in message-mode will fall back on the
> > relevant filling functions; etc.
> >
> >
> > [org-fill-paragraph]: http://orgmode.org/worg/doc.html#org-fill-paragraph
> >
> > [org-metaup] and [org-metadown] will drag the element backward/forward
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >
> > If you want to get the old behavior (i.e. moving a line up and down), you
> > can first select the line as an active region, then =org-metaup/down= to
> > move the region backward/forward.  This also works with regions bigger than
> > just one line.
> >
> >
> > [org-metaup]: http://orgmode.org/worg/doc.html#org-metaup
> > [org-metadown]: http://orgmode.org/worg/doc.html#org-metadown
> >
> > [org-up-element] and [org-down-element] (respectively =C-c C-^= and =C-c 
> > C-_=)
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >
> > This will move the point up/down in the hierarchy of elements.
> >
> >
> > [org-up-element]: http://orgmode.org/worg/doc.html#org-up-element
> > [org-down-element]: http://orgmode.org/worg/doc.html#org-down-element
> >
> > [org-backward-element] and [org-forward-element] (respectively =M-{= and 
> > =M-}=)
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >
> > This will move the point backward/forward in the hierarchy of elements.
> >
> >
> > [org-backward-element]: 
> > http://orgmode.org/worg/doc.html#org-backward-element
> > [org-forward-element]: http://orgmode.org/worg/doc.html#org-forward-element
> >
> > [org-narrow-to-element] will narrow to the element at point
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >
> > [org-narrow-to-element]: 
> > http://orgmode.org/worg/doc.html#org-narrow-to-element
> >
> > [org-mark-element] will mark the element at point
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >
> > This command is bound to =M-h= and will mark the element at point.  If the
> > point is at a paragraph, it will mark the paragraph.  If the point is at a
> > list item, it will mark the list item.  Etc.
> >
> > Note that if point is at the beginning of a list, it will mark the whole
> > list.
> >
> > To mark a subtree, you can either use =M-h= on the headline (since there is
> > no ambiguity about the element you're at) or [org-mark-subtree] (=C-c @=)
> > anywhere in the subtree.
> >
> > Invoking [org-mark-element] repeatedly will try to mark the next element on
> > top of the previous one(s).  E.g. hitting =M-h= twice on a headline will
> > mark the current subtree and the next one on the same level.
> >
> >
> > [org-mark-element]: http://orgmode.org/worg/doc.html#org-mark-element
> > [org-mark-subtree]: http://orgmode.org/worg/doc.html#org-mark-subtree
> > [org-mark-element]: http://orgmode.org/worg/doc.html#org-mark-element
> >
> > Org Agenda
> > ----------
> >
> > New option [org-agenda-sticky]
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >
> > There is a new option `org-agenda-sticky' which enables "sticky" agendas.
> > Sticky agendas remain opened in the background so that you don't need to
> > regenerate them each time you hit the corresponding keystroke.  This is a
> > big time saver.
> >
> > When [org-agenda-sticky] is =non-nil=, the agenda =q= key will bury the
> > agenda buffers.  Agenda commands will then show existing buffer instead of
> > generating new ones.  When =nil=, =q= will kill the single agenda buffer.
> >
> >
> > [org-agenda-sticky]: http://orgmode.org/worg/doc.html#org-agenda-sticky
> > [org-agenda-sticky]: http://orgmode.org/worg/doc.html#org-agenda-sticky
> >
> > New option [org-agenda-custom-commands-contexts]
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >
> > Setting this option allows you to define specific context where
> > agenda commands should be available from.  For example, when set
> > to this value
> >
> >
> >
> >   (setq org-agenda-custom-commands-contexts
> >         '(("p" (in-file . "\\.txt"))))
> >
> >
> > then the =p= agenda command will only be available from buffers
> > visiting *.txt files.  See the docstring and the manual for more
> > details on how to use this.
> >
> >
> > [org-agenda-custom-commands-contexts]: 
> > http://orgmode.org/worg/doc.html#org-agenda-custom-commands-contexts
> >
> > =N= and =P= in the agenda will move to the next/previous item
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >
> > New command [org-agenda-bulk-mark-all] to mark all items
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >
> > This new command is bound to =*= in agenda mode.
> >
> > There is also a new option [org-agenda-bulk-mark-char] to set the character
> > to use as a mark for bulk actions.
> >
> >
> > [org-agenda-bulk-mark-all]: 
> > http://orgmode.org/worg/doc.html#org-agenda-bulk-mark-all
> > [org-agenda-bulk-mark-char]: 
> > http://orgmode.org/worg/doc.html#org-agenda-bulk-mark-char
> >
> > New option [org-agenda-persistent-marks]
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >
> > When set to =non-nil=, marks will remain visible after a bulk action.  You
> > can temporarily toggle this by pressing =p= when invoking
> > [org-agenda-bulk-action].
> >
> >
> > [org-agenda-persistent-marks]: 
> > http://orgmode.org/worg/doc.html#org-agenda-persistent-marks
> > [org-agenda-bulk-action]: 
> > http://orgmode.org/worg/doc.html#org-agenda-bulk-action
> >
> > New option [org-agenda-skip-timestamp-if-deadline-is-shown]
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >
> > =Non-nil= means skip timestamp line if same entry shows because of
> > deadline.
> >
> > In the agenda of today, an entry can show up multiple times because it has
> > both a plain timestamp and has a nearby deadline.  When this variable is t,
> > then only the deadline is shown and the fact that the entry has a timestamp
> > for or including today is not shown.  When this variable is =nil=, the
> > entry will be shown several times.
> >
> >
> > [org-agenda-skip-timestamp-if-deadline-is-shown]: 
> > http://orgmode.org/worg/doc.html#org-agenda-skip-timestamp-if-deadline-is-shown
> >
> > New =todo-unblocked= and =nottodo-unblocked= skip conditions
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >
> > See the [git commit] for more explanations.
> >
> >
> > [git commit]: 
> > http://orgmode.org/w/?p%3Dorg-mode.git%3Ba%3Dcommit%3Bh%3Df426da
> >
> > Allow category filtering in the agenda
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >
> > You can now filter the agenda by category.  Pressing "<" will filter by
> > the category of the item on the current line, and pressing "<" again will
> > remove the filter.  You can combine tag filters and category filters.
> >
> > You can use [org-agenda-category-filter] in your custom agenda views and
> > [org-agenda-category-filter-preset] in your main configuration.
> >
> > See also the new command [org-agenda-filter-by-top-category]: hitting `^'
> > will filter by "Top" category: only show entries that are of the same
> > category than the Top category of the entry at point.
> >
> > [org-agenda-category-filter]: 
> > http://orgmode.org/worg/doc.html#org-agenda-category-filter
> > [org-agenda-category-filter-preset]: 
> > http://orgmode.org/worg/doc.html#org-agenda-category-filter-preset
> > [org-agenda-filter-by-top-category]: 
> > http://orgmode.org/worg/doc.html#org-agenda-filter-by-top-category
> >
> > Org Links
> > ---------
> >
> > Inserting links
> > ~~~~~~~~~~~~~~~
> >
> > When inserting links through [org-insert-link], the description is now
> > displayed first, followed by the literal link, as the description is often
> > more useful when you look for the link you want to insert.
> >
> > Completion now complete both literal links and description.  If you
> > complete a description, the literal link and its description will be
> > inserted directly, whereas when you complete the literal link, you will be
> > prompted for a description (as with Org 7.8.)
> >
> > In the completion buffer, links to the current buffer are now highlighted.
> >
> >
> > [org-insert-link]: http://orgmode.org/worg/doc.html#org-insert-link
> >
> > New templates =%h= and =%(sexp)= for abbreviated links
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >
> > On top of =%s= template, which is replaced by the link tag in abbreviated
> > links, you can now use =%h= (which does the same than =%s= but does not
> > hexify the tag) and =%(sexp)= (which can run a function that takes the tag
> > as its own argument.)
> >
> > New link type =help=
> > ~~~~~~~~~~~~~~~~~~~~
> >
> > You can now create links from =help= buffers.
> >
> > For example, if you request help for the command [org-agenda] with =C-h f
> > org-agenda RET=, creating a link from this buffer will let you go back to
> > the same buffer.
> >
> >
> > [org-agenda]: http://orgmode.org/worg/doc.html#org-agenda
> >
> > New command [org-insert-all-links]
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >
> > This will insert all links as list items.  With a universal prefix
> > argument, links will not be deleted from [org-stored-links].
> >
> > This new command is bound to =C-c C-M-l=.
> >
> >
> > [org-insert-all-links]: 
> > http://orgmode.org/worg/doc.html#org-insert-all-links
> > [org-stored-links]: http://orgmode.org/worg/doc.html#org-stored-links
> >
> > New option [org-url-hexify-p]
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >
> > When set to =nil=, the =URL= part of a link will not be hexified.
> >
> >
> > [org-url-hexify-p]: http://orgmode.org/worg/doc.html#org-url-hexify-p
> >
> > Org can now open multiple shell links
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >
> >
> > New option [org-doi-server-url] to specify an alternate DOI server
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >
> >
> > [org-doi-server-url]: http://orgmode.org/worg/doc.html#org-doi-server-url
> >
> > RET now follows time stamps links
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >
> > Org Editing
> > -----------
> >
> > [org-todo] and =org-archive-*= can now loop in the active region
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >
> > When [org-loop-over-headlines-in-active-region] is =non-nil=, using 
> > [org-todo]
> > or =org-archive-*= commands in the active region will loop over headlines.
> > This is handy if you want to set the TODO keyword for several items, or
> > archive them quickly.
> >
> > [org-todo]: http://orgmode.org/worg/doc.html#org-todo
> > [org-loop-over-headlines-in-active-region]: 
> > http://orgmode.org/worg/doc.html#org-loop-over-headlines-in-active-region
> > [org-todo]: http://orgmode.org/worg/doc.html#org-todo
> >
> > You can now set tags for headlines in a region
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >
> > If [org-loop-over-headlines-in-active-region] is =non-nil=, then selecting
> > the region and hitting =C-c C-q= will set the tags for all headlines in the
> > region.
> >
> >
> > [org-loop-over-headlines-in-active-region]: 
> > http://orgmode.org/worg/doc.html#org-loop-over-headlines-in-active-region
> >
> > New command [org-insert-drawer] to insert a drawer interactively
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >
> > [org-insert-drawer]: http://orgmode.org/worg/doc.html#org-insert-drawer
> >
> > Comments start with "^[ \t]*# " anywhere on a line
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >
> > Note that the space after the hashtag is mandatory.  Comments with "^#+"
> > are not supported anymore.
> >
> > New speed key =#= to toggle the COMMENT cookie on a headline
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >
> > =indent-region-function= is now set to [org-indent-region]
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >
> > =C-M-\= should now produce useful results.
> >
> > You can unindent the buffer with [org-unindent-buffer].
> >
> >
> > [org-indent-region]: http://orgmode.org/worg/doc.html#org-indent-region
> > [org-unindent-buffer]: http://orgmode.org/worg/doc.html#org-unindent-buffer
> >
> > New option [org-allow-promoting-top-level-subtree]
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >
> > When =non-nil=, =S-M-<left>= will promote level-1 subtrees containing other
> > subtrees.  The level-1 headline will be commented out.  You can revert to
> > the previous state with =M-x undo RET=.
> >
> >
> > [org-allow-promoting-top-level-subtree]: 
> > http://orgmode.org/worg/doc.html#org-allow-promoting-top-level-subtree
> >
> > Org Clock
> > ---------
> >
> >
> > New keybinding =C-c C-x C-z= for [org-clock-resolve]
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >
> > [org-clock-resolve]: http://orgmode.org/worg/doc.html#org-clock-resolve
> >
> > New keybinding =C-c C-x C-q= for [org-clock-cancel]
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >
> > [org-clock-cancel]: http://orgmode.org/worg/doc.html#org-clock-cancel
> >
> > New command [org-clock-in-last] to clock in the last clocked item
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >
> > This command is bound to =C-c C-x C-x= and will clock in the last clocked
> > entry, if any.
> >
> >
> > [org-clock-in-last]: http://orgmode.org/worg/doc.html#org-clock-in-last
> >
> > =C-u M-x= [org-clock-out] =RET= now prompts for a state to switch to
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >
> > [org-clock-out]: http://orgmode.org/worg/doc.html#org-clock-out
> >
> > =S-M-<up/down>= on a clock timestamps adjusts the previous/next clock
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >
> > New option [org-clock-continuously]
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >
> > When set to =nil=, clocking in a task will first try to find the last
> > clocked out task and restart from when that task was clocked out.
> >
> > You can temporarily activate continuous clocking with =C-u C-u C-u M-x
> > [org-clock-in] RET= (three universal prefix arguments) and =C-u C-u M-x
> > [org-clock-in-last] RET= (two universal prefix arguments).
> >
> >
> > [org-clock-continuously]: 
> > http://orgmode.org/worg/doc.html#org-clock-continuously
> > [org-clock-in]: doc::org-clock-in
> > [org-clock-in-last]: doc::org-clock-in-last
> >
> > New option [org-clock-frame-title-format]
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >
> > This option sets the value of =frame-title-format= when clocking in.
> >
> >
> > [org-clock-frame-title-format]: 
> > http://orgmode.org/worg/doc.html#org-clock-frame-title-format
> >
> > New options for controlling the clockreport display
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >
> > [org-clock-file-time-cell-format]: Format string for the file time cells in
> > clockreport.
> >
> > [org-clock-total-time-cell-format]: Format string for the total time cells
> > in clockreport.
> >
> >
> > [org-clock-file-time-cell-format]: 
> > http://orgmode.org/worg/doc.html#org-clock-file-time-cell-format
> > [org-clock-total-time-cell-format]: 
> > http://orgmode.org/worg/doc.html#org-clock-total-time-cell-format
> >
> > New options for controlling the clock/timer display
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >
> > [org-clock-clocked-in-display]: control whether the current clock is
> > displayed in the mode line and/or frame title.
> >
> > [org-timer-display]: control whether the current timer is displayed in the
> > mode line and/or frame title.
> >
> > This allows the clock and timer to be displayed in the frame title instead
> > of, or as well as, the mode line.  This is useful for people with limited
> > space in the mode line but with ample space in the frame title.
> >
> >
> > [org-clock-clocked-in-display]: 
> > http://orgmode.org/worg/doc.html#org-clock-clocked-in-display
> > [org-timer-display]: http://orgmode.org/worg/doc.html#org-timer-display
> >
> > Org Appearance
> > --------------
> >
> > New option [org-custom-properties]
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >
> > The visibility of properties listed in this options can be turn on/off with
> > [org-toggle-custom-properties-visibility].  This might be useful for
> > properties used by third-part tools or that you don't want to see
> > temporarily.
> >
> >
> > [org-custom-properties]: 
> > http://orgmode.org/worg/doc.html#org-custom-properties
> > [org-toggle-custom-properties-visibility]: 
> > http://orgmode.org/worg/doc.html#org-toggle-custom-properties-visibility
> >
> > New command [org-redisplay-inline-images]
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >
> > This will redisplay all images.  It is bound to =C-c C-x C-M-v=.
> >
> >
> > [org-redisplay-inline-images]: 
> > http://orgmode.org/worg/doc.html#org-redisplay-inline-images
> >
> > New entities in =org-entities.el=
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >
> > There are these new entities:
> >
> >     ("tilde" "\\~{}" nil "&tilde;" "~" "~" "~")
> >     ("slash" "/" nil "/" "/" "/" "/")
> >     ("plus" "+" nil "+" "+" "+" "+")
> >     ("under" "\\_" nil "_" "_" "_" "_")
> >     ("equal" "=" nil "=" "=" "=" "=")
> >     ("asciicirc" "\\textasciicircum{}" nil "^" "^" "^" "^")
> >
> > New face =org-list-dt= for definition terms
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >
> > New face =org-date-selected= for the selected calendar day
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >
> > New face value for =org-document-title=
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >
> > The face is back to a normal height.
> >
> > Org Columns
> > -----------
> >
> > New speed command =:= to activate the column view
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >
> > New special property =CLOCKSUM_T= to display today's clocked time
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >
> > You can use =CLOCKSUM_T= the same way you use =CLOCKSUM=.  It will display
> > the time spent on tasks for today only.
> >
> > Use the =:COLUMNS:= property in columnview dynamic blocks
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >
> > If the =:COLUMNS:= is set in a subtree, the columnview dynamic block will
> > use its value as the column format.
> >
> > Consider inline tasks when computing a sum
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >
> > Org Dates and Time Stamps
> > -------------------------
> >
> > Enhanced [org-sparse-tree]
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~
> >
> > =C-c /= can now check for time ranges.
> >
> > When checking for dates with =C-c /= it is useful to change the type of
> > dates that you are interested in.  You can now do this interactively with
> > =c= after =C-c /= and/or by setting [org-sparse-tree-default-date-type] to
> > the default value you want.
> >
> >
> > [org-sparse-tree]: http://orgmode.org/worg/doc.html#org-sparse-tree
> > [org-sparse-tree-default-date-type]: 
> > http://orgmode.org/worg/doc.html#org-sparse-tree-default-date-type
> >
> > Support for hourly repeat cookies
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >
> > You can now use
> >
> > SCHEDULED: <2012-08-20 lun. 08:00 +1h>
> >
> > if you want to add an hourly repeater to an entry.
> >
> > =C-u C-u C-c .= inserts a time-stamp with no prompt
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >
> > When (setq [org-read-date-prefer-future] 'time), accept days in the prompt
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >
> > "8am Wed" and "Wed 8am" are now acceptable values when entering a date from
> > the prompt.  If [org-read-date-prefer-future] is set to =time=, this will
> > produce the expected prompt indication.
> >
> >
> > [org-read-date-prefer-future]: 
> > http://orgmode.org/worg/doc.html#org-read-date-prefer-future
> > [org-read-date-prefer-future]: 
> > http://orgmode.org/worg/doc.html#org-read-date-prefer-future
> >
> > New option [org-datetree-add-timestamp]
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >
> > When set to =non-nil=, datetree entries will also have a timestamp.  This
> > is useful if you want to see these entries in a sparse tree with =C-c /=.
> >
> >
> > [org-datetree-add-timestamp]: 
> > http://orgmode.org/worg/doc.html#org-datetree-add-timestamp
> >
> > Org Capture
> > -----------
> >
> > New command [org-capture-string]
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >
> > M-x [org-capture-string] RET will prompt for a string and a capture 
> > template.
> > The string will be used as an annotation for the template.  This is useful
> > when capturing in batch mode as it lets you define the content of the
> > template without being in Emacs.
> >
> >
> > [org-capture-string]: http://orgmode.org/worg/doc.html#org-capture-string
> > [org-capture-string]: http://orgmode.org/worg/doc.html#org-capture-string
> >
> > New option [org-capture-templates-contexts]
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >
> > Setting this option allows you to define specific context where
> > capture templates should be available from.  For example, when
> > set to this value
> >
> >
> >
> >   (setq org-capture-templates-contexts
> >         '(("c" (in-mode . "message-mode"))))
> >
> >
> > then the =c= capture template will only be available from
> > =message-mode= buffers.  See the docstring and the manual for
> > more details on how to use this.
> >
> >
> > [org-capture-templates-contexts]: 
> > http://orgmode.org/worg/doc.html#org-capture-templates-contexts
> >
> > New =%l= template to insert the literal link
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >
> > New option [org-capture-bookmark]
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >
> > Org used to automatically add a bookmark with capture a note.  You can now
> > turn this on by setting [org-capture-bookmark] to =nil=.
> >
> >
> > [org-capture-bookmark]: 
> > http://orgmode.org/worg/doc.html#org-capture-bookmark
> > [org-capture-bookmark]: 
> > http://orgmode.org/worg/doc.html#org-capture-bookmark
> >
> > Expand =%<num>= escape sequences into text entered for <num>'th 
> > =%^{PROMPT}= escape
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >
> > See the manual for more explanations.
> >
> > More control over empty lines
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >
> > You can use =:empty-lines-before= and =:empty-lines-after= to control the
> > insertion of empty lines.  Check the manual for more explanations.
> >
> > New hook [org-capture-prepare-finalize-hook]
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >
> > This new hook runs before the finalization process starts.
> >
> >
> > [org-capture-prepare-finalize-hook]: 
> > http://orgmode.org/worg/doc.html#org-capture-prepare-finalize-hook
> >
> > Org Export
> > ----------
> >
> > New command [orgtbl-to-table.el] and [orgtbl-to-unicode]
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >
> > [orgtbl-to-table.el] will convert the table to a =table.el= table, and
> > [orgtbl-to-unicode] will use ascii-art-to-unicode.el (when available) to
> > print beautiful tables.
> >
> >
> > [orgtbl-to-table.el]: http://orgmode.org/worg/doc.html#orgtbl-to-table.el
> > [orgtbl-to-unicode]: http://orgmode.org/worg/doc.html#orgtbl-to-unicode
> > [orgtbl-to-table.el]: http://orgmode.org/worg/doc.html#orgtbl-to-table.el
> > [orgtbl-to-unicode]: http://orgmode.org/worg/doc.html#orgtbl-to-unicode
> >
> > [org-table-export] now a bit clever about the target format
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >
> > When you specify a file name like =table.csv=, [org-table-export] will now
> > suggest [orgtbl-to-csv] as the default method for exporting the table.
> >
> >
> > [org-table-export]: http://orgmode.org/worg/doc.html#org-table-export
> > [org-table-export]: http://orgmode.org/worg/doc.html#org-table-export
> > [orgtbl-to-csv]: http://orgmode.org/worg/doc.html#orgtbl-to-csv
> >
> > New option [org-export-date-timestamp-format]
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >
> > The option allows to set a time string format for Org timestamps
> > in the #+DATE option.
> >
> > [org-export-date-timestamp-format]: 
> > http://orgmode.org/worg/doc.html#org-export-date-timestamp-format
> >
> > LaTeX: New options for exporting table rules :tstart, :hline and :tend
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >
> > See [org-export-latex-tables-hline] and [org-export-latex-tables-tend].
> >
> >
> > [org-export-latex-tables-hline]: 
> > http://orgmode.org/worg/doc.html#org-export-latex-tables-hline
> > [org-export-latex-tables-tend]: 
> > http://orgmode.org/worg/doc.html#org-export-latex-tables-tend
> >
> > LaTeX: You can now set =:hfmt= from =#+ATTR_LaTeX=
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >
> > Beamer: Add support and keybinding for the =exampleblock= environment
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >
> > Add support for these languages in [org-export-language-setup].  More
> > languages are always welcome.
> >
> >
> > [org-export-language-setup]: 
> > http://orgmode.org/worg/doc.html#org-export-language-setup
> >
> > Beamer: New option [org-beamer-inherited-properties]
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >
> > This option allows Beamer export to inherit some properties.
> > Thanks to Carsten for implementing this.
> >
> >
> > [org-beamer-inherited-properties]: 
> > http://orgmode.org/worg/doc.html#org-beamer-inherited-properties
> >
> > ODT: Add support for ODT export in org-bbdb.el
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >
> > ODT: Add support for indented tables (see [this commit] for details)
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >
> > [this commit]: 
> > http://orgmode.org/w/?p%3Dorg-mode.git%3Ba%3Dcommit%3Bh%3De9fd33
> >
> > ODT: Improve the conversion from ODT to other formats
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >
> > ASCII: Swap the level-1/level-2 characters to underline the headlines
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >
> > Support for Chinese, simplified Chinese, Russian, Ukrainian and Japanese
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >
> > HTML: New option [org-export-html-date-format-string]
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >
> > Format string to format the date and time in HTML export.
> > Thanks to S?bastien Vauban for this patch.
> >
> >
> > [org-export-html-date-format-string]: 
> > http://orgmode.org/worg/doc.html#org-export-html-date-format-string
> >
> > Miscellaneous
> > -------------
> >
> > [org-table-number-regexp] accept comma as a decimal mark to represent 
> > numbers
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >
> > [org-table-number-regexp]: 
> > http://orgmode.org/worg/doc.html#org-table-number-regexp
> >
> > Org allows a new property =APPT_WARNTIME=
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >
> > You can set it with the =W= speedy key or set it manually.  When set,
> > exporting to iCalendar and [org-agenda-to-appt] will use the value of this
> > property as the number of minutes for the warning alarm.
> >
> >
> > [org-agenda-to-appt]: http://orgmode.org/worg/doc.html#org-agenda-to-appt
> >
> > New command [org-inc-effort]
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >
> > This will increment the effort value.
> >
> > It is bound to =C-c C-x E= and to =E= as a speedy command.
> >
> >
> > [org-inc-effort]: http://orgmode.org/worg/doc.html#org-inc-effort
> >
> > Attach: Add support for creating symbolic links
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >
> > `org-attach-method' now supports a new method =lns=, allowing to attach
> > symbolic links.
> >
> > Archive: you can now archive to a datetree
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >
> > New option [org-inlinetask-show-first-star]
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >
> > =Non-nil= means display the first star of an inline task as
> > additional marker.  When =nil=, the first star is not shown.
> >
> >
> > [org-inlinetask-show-first-star]: 
> > http://orgmode.org/worg/doc.html#org-inlinetask-show-first-star
> >
> > New option [org-latex-preview-ltxpng-directory]
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >
> > This lets you define the path for the =ltxpng/= directory.
> >
> >
> > [org-latex-preview-ltxpng-directory]: 
> > http://orgmode.org/worg/doc.html#org-latex-preview-ltxpng-directory
> >
> > You can now use imagemagick instead of dvipng to preview LaTeX fragments
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >
> > You can now turn off [orgstruct++-mode] safely
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >
> > [orgstruct++-mode]: http://orgmode.org/worg/doc.html#orgstruct++-mode
> >
> > =C-u C-c C-c= on list items to add check boxes
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >
> > =C-u C-c C-c= will add an empty check box on a list item.
> >
> > When hit from the top of the list, it will add check boxes for all top
> > level list items.
> >
> > =org-list-ending-method= and =org-list-end-regexp= are now obsolete
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >
> > Fall back on using [org-list-end-re] only, which see.
> >
> >
> > [org-list-end-re]: http://orgmode.org/worg/doc.html#org-list-end-re
> >
> > org-feed.el now expands =%(sexp)= templates
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >
> > New option [org-protocol-data-separator]
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >
> >
> > [org-protocol-data-separator]: 
> > http://orgmode.org/worg/doc.html#org-protocol-data-separator
> >
> > New option [org-ditaa-jar-option] to specify the ditaa jar file
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >
> >
> > [org-ditaa-jar-option]: 
> > http://orgmode.org/worg/doc.html#org-ditaa-jar-option
> >
> > New possible value for [org-loop-over-headlines-in-active-region]
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >
> > When [org-loop-over-headlines-in-active-region] is set to
> > =start-level=, the command will loop over the active region but
> > will only act upon entries that are of the same level than the
> > first headline in the region.
> >
> >
> > [org-loop-over-headlines-in-active-region]: 
> > http://orgmode.org/worg/doc.html#org-loop-over-headlines-in-active-region
> > [org-loop-over-headlines-in-active-region]: 
> > http://orgmode.org/worg/doc.html#org-loop-over-headlines-in-active-region
> >
> > New option [org-habit-show-all-today]
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >
> > When set to =t=, show all (even unscheduled) habits on today's agenda.
> >
> >
> > [org-habit-show-all-today]: 
> > http://orgmode.org/worg/doc.html#org-habit-show-all-today
> >
> >
> > Important bug fixes
> > ===================
> >
> > M-TAB on options keywords perform completion correctly again
> > ------------------------------------------------------------
> >
> > If you hit =M-TAB= on keywords like =#+TITLE=, Org will try to
> > perform completion with meaningful values.
> >
> > Add licenses to javascript embedded and external code snippets
> > --------------------------------------------------------------
> >
> > Embedded javascript code produced when exporting an Org file to HTML is now
> > licensed under GPLv3 (or later), and the copyright is owned by the Free
> > Software Foundation, Inc.
> >
> > The javascript code for embedding MathJax in the browser mentions the
> > MathJax copyright and the Apache 2.0 license.
> >
> > The javascript code for embedding =org-injo.js= in the browser mentions the
> > copyright of Sebastian Rose and the GPLv3 (or later) license.
> >
> > [org-export-html-scripts] is now a variable, so that you can adapt the code
> > and the license to your needs.
> >
> > See [http://www.gnu.org/philosophy/javascript-trap.html] for explanations on
> > why these changes were necessary.
> >
> >
> > [org-export-html-scripts]: 
> > http://orgmode.org/worg/doc.html#org-export-html-scripts
> >
> >
> > --
> >  Bastien
> >
> >
> 
> 
> 
> 

The Holy Father is neither
jude <address@hidden>