Marcelo de Moraes Serpa <
address@hidden> writes:
> Yes,
>
>
>> org git:(master): make autoloads
>> ======================================================
>> = Invoke "make help" for a synopsis of make targets. =
>> = Created a default
local.mk template. =
>> = Setting "oldorg" as the default target. =
>> = Please adapt
local.mk to your local setup! =
>> ======================================================
>> End of file during parsing
>> make: [
local.mk] Error 255 (ignored)
>> make -C lisp autoloads
>> rm -f org-version.el org-loaddefs.el org-version.elc org-loaddefs.elc
>> org-install.elc
>> org-version: 8.0-pre (release_8.0-pre-150-g412d98)
>> End of file during parsing
>> make[1]: *** [org-version.el] Error 255
>> make: *** [autoloads] Error 2
>
>
>
>
>
> On Fri, Mar 22, 2013 at 3:35 PM, Thomas S. Dye <
address@hidden> wrote:
>
>> Aloha Marcelo,
>>
>> Marcelo de Moraes Serpa <
address@hidden> writes:
>>
>> > Hi Nick, thank you for the reply.
>> >
>> > Happens it was an error specific to the terminal version of emacs
>> (OpenStep
>> > could not be found, by org-mac-protocol). Not loading that file solved
>> the
>> > issue.
>> >
>> > It looks like I just need to upgrade from org-remember to org-capture.
>> >
>> > However, I'm getting the following message when calling org-version:
>> >
>> > Org-mode version 8.0-pre (release_8.0-pre-150-g412d98-git @
>> org-loaddefs.el
>> > can not be found!)
>> >
>> > What does org-loaddefs do and how could I get org-loaddefs to be loaded?
>>
>> Did you `make autoloads'?
>>
>> Tom
>>
>> >
>> > Thanks!
>> >
>> > - Marcelo
>> >
>> >
>> > On Fri, Mar 22, 2013 at 3:02 PM, Nick Dokos <
address@hidden>
>> wrote:
>> >
>> >> Marcelo de Moraes Serpa <
address@hidden> wrote:
>> >>
>> >>
>> >> > I have org in ~/.emacs.d/vendor/org, and I also added the following
>> >> lines to my init.el:
>> >> >
>> >> > (add-to-list load-path (cons (concat dotfiles-dir "vendor/org/lisp")
>> >> load-path))
>> >> > (add-to-list load-path (cons (concat dotfiles-dir
>> >> "vendor/org/contrib/lisp") load-path))
>> >> >
>> >> > But it fails hard when emacs inits:
>> >> >
>> >> > Warning (initialization): An error occurred while loading
>> >> `/Users/fullofcaffeine/.emacs.d/
>> >> > init.el':
>> >> > error: Autoloading failed to define function
>> >> org-babel-do-load-languages
>> >> > To ensure normal operation, you should investigate and remove the
>> >> > cause of the error in your initialization file. Start Emacs with
>> >> > the `--debug-init' option to view a complete error backtrace.
>> >> >
>> >> > When I try to "make autoloads" I get the following:
>> >> >
>> >> > org git:(master): make autoloads
>> >> > ======================================================
>> >> > = Invoke "make help" for a synopsis of make targets. =
>> >> > = Created a default
local.mk template. =
>> >> > = Setting "oldorg" as the default target. =
>> >> > = Please adapt
local.mk to your local setup! =
>> >> > ======================================================
>> >> > End of file during parsing
>> >> > make: [
local.mk] Error 255 (ignored)
>> >> > make -C lisp autoloads
>> >> > rm -f org-version.el org-loaddefs.el org-version.elc
>> >> org-loaddefs.elc org-install.elc
>> >> > org-version: 8.0-pre (release_8.0-pre-150-g412d98)
>> >> > End of file during parsing
>> >> > make[1]: *** [org-version.el] Error 255
>> >> > make: *** [autoloads] Error 2
>> >> >
>> >> > Not sure where to go from here.
>> >> >
>> >>
>> >> This
>> >>
>> >> > Start Emacs with
>> >> > the `--debug-init' option to view a complete error backtrace.
>> >>
>> >> would be a start. The "End of file during parsing" probably indicates
>> >> a missing paren or some such, possibly in init.el. I presume emacs -q
>> >> starts up properly?
>> >>
>> >> Nick
>> >>
>> >>
>> > Hi Nick, thank you for the reply.
>> >
>> >
>> > Happens it was an error specific to the terminal version of emacs
>> > (OpenStep could not be found, by org-mac-protocol). Not loading that
>> > file solved the issue.
>> >
>> > It looks like I just need to upgrade from org-remember to org-capture.
>> >
>> > However, I'm getting the following message when calling org-version:
>> >
>> > Org-mode version 8.0-pre (release_8.0-pre-150-g412d98-git @
>> > org-loaddefs.el can not be found!)
>> >
>> > What does org-loaddefs do and how could I get org-loaddefs to be
>> > loaded?
>> >
>> > Thanks!
>> >
>> > - Marcelo
>> >
>> >
>> > On Fri, Mar 22, 2013 at 3:02 PM, Nick Dokos <
address@hidden>
>> > wrote:
>> >
>> >
>> > Marcelo de Moraes Serpa <
address@hidden> wrote:
>> >
>> >
>> > > I have org in ~/.emacs.d/vendor/org, and I also added the
>> > following lines to my init.el:
>> > >
>> > > (add-to-list load-path (cons (concat dotfiles-dir
>> > "vendor/org/lisp") load-path))
>> > > (add-to-list load-path (cons (concat dotfiles-dir
>> > "vendor/org/contrib/lisp") load-path))
>> > >
>> > > But it fails hard when emacs inits:
>> > >
>> > > Warning (initialization): An error occurred while loading
>> > `/Users/fullofcaffeine/.emacs.d/
>> > > init.el':
>> > > error: Autoloading failed to define function
>> > org-babel-do-load-languages
>> > > To ensure normal operation, you should investigate and
>> > remove the
>> > > cause of the error in your initialization file. Start Emacs
>> > with
>> > > the `--debug-init' option to view a complete error
>> > backtrace.
>> > >
>> > > When I try to "make autoloads" I get the following:
>> > >
>> > > org git:(master): make autoloads
>> > > ======================================================
>> > > = Invoke "make help" for a synopsis of make targets. =
>> > > = Created a default
local.mk template. =
>> > > = Setting "oldorg" as the default target. =
>> > > = Please adapt
local.mk to your local setup! =
>> > > ======================================================
>> > > End of file during parsing
>> > > make: [
local.mk] Error 255 (ignored)
>> > > make -C lisp autoloads
>> > > rm -f org-version.el org-loaddefs.el org-version.elc
>> > org-loaddefs.elc org-install.elc
>> > > org-version: 8.0-pre (release_8.0-pre-150-g412d98)
>> > > End of file during parsing
>> > > make[1]: *** [org-version.el] Error 255
>> > > make: *** [autoloads] Error 2
>> > >
>> > > Not sure where to go from here.
>> > >
>> >
>> >
>> > This
>> >
>> >
>> > > Start Emacs with
>> > > the `--debug-init' option to view a complete error
>> > backtrace.
>> >
>> >
>> > would be a start. The "End of file during parsing" probably
>> > indicates
>> > a missing paren or some such, possibly in init.el. I presume emacs
>> > -q
>> > starts up properly?
>> >
>> > Nick
>> >
>> >
>> >
>>
>> --
>> Thomas S. Dye
>>
http://www.tsdye.com
>>
>>
> Yes,
>
>
>
> org git:(master): make autoloads
> ======================================================
> = Invoke "make help" for a synopsis of make targets. =
> = Created a default
local.mk template. =
> = Setting "oldorg" as the default target. =
> = Please adapt
local.mk to your local setup! =
> ======================================================
> End of file during parsing
> make: [
local.mk] Error 255 (ignored)
> make -C lisp autoloads
> rm -f org-version.el org-loaddefs.el org-version.elc
> org-loaddefs.elc org-install.elc
> org-version: 8.0-pre (release_8.0-pre-150-g412d98)
> End of file during parsing
> make[1]: *** [org-version.el] Error 255
> make: *** [autoloads] Error 2
>
>
>
>
>
> On Fri, Mar 22, 2013 at 3:35 PM, Thomas S. Dye <
address@hidden> wrote:
>
> Aloha Marcelo,
>
>
> Marcelo de Moraes Serpa <
address@hidden> writes:
>
> > Hi Nick, thank you for the reply.
> >
> > Happens it was an error specific to the terminal version of
> emacs (OpenStep
> > could not be found, by org-mac-protocol). Not loading that file
> solved the
> > issue.
> >
> > It looks like I just need to upgrade from org-remember to
> org-capture.
> >
> > However, I'm getting the following message when calling
> org-version:
> >
> > Org-mode version 8.0-pre (release_8.0-pre-150-g412d98-git @
> org-loaddefs.el
> > can not be found!)
> >
> > What does org-loaddefs do and how could I get org-loaddefs to be
> loaded?
>
>
> Did you `make autoloads'?
>
> Tom
>
>
>
> >
> > Thanks!
> >
> > - Marcelo
> >
> >
> > On Fri, Mar 22, 2013 at 3:02 PM, Nick Dokos
> <
address@hidden> wrote:
> >
> >> Marcelo de Moraes Serpa <
address@hidden> wrote:
> >>
> >>
> >> > I have org in ~/.emacs.d/vendor/org, and I also added the
> following
> >> lines to my init.el:
> >> >
> >> > (add-to-list load-path (cons (concat dotfiles-dir
> "vendor/org/lisp")
> >> load-path))
> >> > (add-to-list load-path (cons (concat dotfiles-dir
> >> "vendor/org/contrib/lisp") load-path))
> >> >
> >> > But it fails hard when emacs inits:
> >> >
> >> > Warning (initialization): An error occurred while loading
> >> `/Users/fullofcaffeine/.emacs.d/
> >> > init.el':
> >> > error: Autoloading failed to define function
> >> org-babel-do-load-languages
> >> > To ensure normal operation, you should investigate and
> remove the
> >> > cause of the error in your initialization file. Start
> Emacs with
> >> > the `--debug-init' option to view a complete error
> backtrace.
> >> >
> >> > When I try to "make autoloads" I get the following:
> >> >
> >> > org git:(master): make autoloads
> >> > ======================================================
> >> > = Invoke "make help" for a synopsis of make targets. =
> >> > = Created a default
local.mk template. =
> >> > = Setting "oldorg" as the default target. =
> >> > = Please adapt
local.mk to your local setup! =
> >> > ======================================================
> >> > End of file during parsing
> >> > make: [
local.mk] Error 255 (ignored)
> >> > make -C lisp autoloads
> >> > rm -f org-version.el org-loaddefs.el org-version.elc
> >> org-loaddefs.elc org-install.elc
> >> > org-version: 8.0-pre (release_8.0-pre-150-g412d98)
> >> > End of file during parsing
> >> > make[1]: *** [org-version.el] Error 255
> >> > make: *** [autoloads] Error 2
> >> >
> >> > Not sure where to go from here.
> >> >
> >>
> >> This
> >>
> >> > Start Emacs with
> >> > the `--debug-init' option to view a complete error
> backtrace.
> >>
> >> would be a start. The "End of file during parsing" probably
> indicates
> >> a missing paren or some such, possibly in init.el. I presume
> emacs -q
> >> starts up properly?
> >>
> >> Nick
> >>
> >>
> > Hi Nick, thank you for the reply.
> >
> >
> > Happens it was an error specific to the terminal version of
> emacs
> > (OpenStep could not be found, by org-mac-protocol). Not loading
> that
> > file solved the issue.
> >
> > It looks like I just need to upgrade from org-remember to
> org-capture.
> >
> > However, I'm getting the following message when calling
> org-version:
> >
> > Org-mode version 8.0-pre (release_8.0-pre-150-g412d98-git @
> > org-loaddefs.el can not be found!)
> >
> > What does org-loaddefs do and how could I get org-loaddefs to be
> > loaded?
> >
> > Thanks!
> >
> > - Marcelo
> >
> >
> > On Fri, Mar 22, 2013 at 3:02 PM, Nick Dokos
> <
address@hidden>
> > wrote:
> >
> >
> > Marcelo de Moraes Serpa <
address@hidden> wrote:
> >
> >
> > > I have org in ~/.emacs.d/vendor/org, and I also added the
> > following lines to my init.el:
> > >
> > > (add-to-list load-path (cons (concat dotfiles-dir
> > "vendor/org/lisp") load-path))
> > > (add-to-list load-path (cons (concat dotfiles-dir
> > "vendor/org/contrib/lisp") load-path))
> > >
> > > But it fails hard when emacs inits:
> > >
> > > Warning (initialization): An error occurred while
> loading
> > `/Users/fullofcaffeine/.emacs.d/
> > > init.el':
> > > error: Autoloading failed to define function
> > org-babel-do-load-languages
> > > To ensure normal operation, you should investigate and
> > remove the
> > > cause of the error in your initialization file. Start
> Emacs
> > with
> > > the `--debug-init' option to view a complete error
> > backtrace.
> > >
> > > When I try to "make autoloads" I get the following:
> > >
> > > org git:(master): make autoloads
> > > ======================================================
> > > = Invoke "make help" for a synopsis of make targets. =
> > > = Created a default
local.mk template. =
> > > = Setting "oldorg" as the default target. =
> > > = Please adapt
local.mk to your local setup! =
> > > ======================================================
> > > End of file during parsing
> > > make: [
local.mk] Error 255 (ignored)
> > > make -C lisp autoloads
> > > rm -f org-version.el org-loaddefs.el org-version.elc
> > org-loaddefs.elc org-install.elc
> > > org-version: 8.0-pre (release_8.0-pre-150-g412d98)
> > > End of file during parsing
> > > make[1]: *** [org-version.el] Error 255
> > > make: *** [autoloads] Error 2
> > >
> > > Not sure where to go from here.
> > >
> >
> >
> > This
> >
> >
> > > Start Emacs with
> > > the `--debug-init' option to view a complete error
> > backtrace.
> >
> >
> > would be a start. The "End of file during parsing" probably
> > indicates
> > a missing paren or some such, possibly in init.el. I presume
> emacs
> > -q
> > starts up properly?
> >
> > Nick
> >
> >
> >
>
>
> --
> Thomas S. Dye
>
http://www.tsdye.com
>
>
>
--
Thomas S. Dye
http://www.tsdye.com