[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Freeipmi-devel] Supermicro X8DTG-QF System Event Log
|
From: |
Werner Fischer |
|
Subject: |
Re: [Freeipmi-devel] Supermicro X8DTG-QF System Event Log |
|
Date: |
Fri, 02 Dec 2011 19:11:18 +0100 |
Hi Al,
On Fre, 2011-12-02 at 09:52 -0800, Albert Chu wrote:
> Hi Götz,
>
> Presently the CPU oem temperatures aren't supported in ipmi-sel. I
> simply didn't know they could show up in the SEL. I'll add support and
> e-mail you a link to a beta later on.
thanks, that's great!
Do you have all necessary information or should I ping Supermicro for
all of their "OEM Event Offsets" and how they correspond to different
temperatures Low/Medium/High/Overheat?
Regards,
Werner
>
> As for your question in a later e-mail,
>
> > So there is no way of getting the temperature in °C, just the values
> > 'Low', 'Medium', 'High' and 'Overheat'?
>
> For these particular sensors no. This is how Supermicro elected to
> implement their sensors.
>
> Al
>
> On Fri, 2011-12-02 at 03:48 -0800, Götz Waschk wrote:
> > Dear Freeipmi devs,
> >
> > I'm administrating a server with a Supermicro X8DTG-QF board. I'd like
> > to read the system event log with ipmi-sel as there seem to be cooling
> > problems with the system, however, the events are not interpreted:
> >
> > # ipmi-sel --interpret-oem-data --output-oem-event-strings
> > ID | Date | Time | Name | Type | Event
> > 1 | Nov-02-2011 | 00:01:14 | CPU2 Temp | OEM Reserved | OEM
> > Event Offset = 02h
> > 2 | Nov-02-2011 | 01:01:14 | CPU2 Temp | OEM Reserved | OEM
> > Event Offset = 02h
> > 3 | Nov-22-2011 | 14:02:10 | CPU1 Temp | OEM Reserved | OEM
> > Event Offset = 02h
> > 4 | Nov-22-2011 | 14:02:10 | CPU1 Temp | OEM Reserved | OEM
> > Event Offset = 02h
> > 5 | Nov-27-2011 | 22:09:21 | CPU2 Temp | OEM Reserved | OEM
> > Event Offset = 02h
> > 6 | Nov-27-2011 | 22:09:24 | CPU2 Temp | OEM Reserved | OEM
> > Event Offset = 02h
> > 7 | Nov-28-2011 | 21:02:05 | CPU2 Temp | OEM Reserved | OEM
> > Event Offset = 02h
> > 8 | Nov-28-2011 | 21:02:05 | CPU2 Temp | OEM Reserved | OEM
> > Event Offset = 02h
> >
> > With ipmi-sensors I can see some more information about CPU[12] Temp:
> >
> > # ipmi-sensors --interpret-oem-data --output-sensor-state
> > ID | Name | Type | State | Reading | Units |
> > Event
> > 2 | CPU1 Temp | OEM Reserved | Nominal | N/A | N/A |
> > 'Low'
> > 3 | CPU2 Temp | OEM Reserved | Nominal | N/A | N/A |
> > 'Low'
> > 4 | System Temp | Temperature | Nominal | 30.00 | C |
> > 'OK'
> > 5 | CPU1 Vcore | Voltage | Nominal | 0.94 | V |
> > 'OK'
> > 6 | CPU2 Vcore | Voltage | Nominal | 0.94 | V |
> > 'OK'
> > 7 | CPU1 VTT | Voltage | Nominal | 1.13 | V |
> > 'OK'
> > 8 | CPU2 VTT | Voltage | Nominal | 1.14 | V |
> > 'OK'
> > 9 | CPU1 DIMM | Voltage | Nominal | 1.51 | V |
> > 'OK'
> > 10 | CPU2 DIMM | Voltage | Nominal | 1.51 | V |
> > 'OK'
> > 11 | ICH 1.5V | Voltage | Nominal | 1.52 | V |
> > 'OK'
> > 12 | IOH 1.8V | Voltage | Nominal | 1.83 | V |
> > 'OK'
> > 13 | +5V | Voltage | Nominal | 5.06 | V |
> > 'OK'
> > 14 | +12V | Voltage | Nominal | 12.46 | V |
> > 'OK'
> > 15 | -12V | Voltage | Nominal | -11.60 | V |
> > 'OK'
> > 16 | IOH 1.1V | Voltage | Nominal | 1.10 | V |
> > 'OK'
> > 17 | +3.3V | Voltage | Nominal | 3.24 | V |
> > 'OK'
> > 18 | +3.3VSB | Voltage | Nominal | 3.24 | V |
> > 'OK'
> > 19 | VBAT | Voltage | Nominal | 3.12 | V |
> > 'OK'
> > 20 | Fan1 | Fan | Nominal | 4320.00 | RPM |
> > 'OK'
> > 21 | Fan2 | Fan | Nominal | 4185.00 | RPM |
> > 'OK'
> > 22 | Fan3 | Fan | Nominal | 4185.00 | RPM |
> > 'OK'
> > 23 | Fan4 | Fan | Nominal | 4185.00 | RPM |
> > 'OK'
> > 24 | Fan5 | Fan | Nominal | 4185.00 | RPM |
> > 'OK'
> > 25 | Fan6 | Fan | Nominal | 4185.00 | RPM |
> > 'OK'
> > 26 | Fan7 | Fan | Nominal | 2295.00 | RPM |
> > 'OK'
> > 27 | Fan8 | Fan | Nominal | 2160.00 | RPM |
> > 'OK'
> > 28 | Fan9 | Fan | N/A | N/A | RPM |
> > N/A
> > 29 | Fan10 | Fan | N/A | N/A | RPM |
> > N/A
> > 30 | Intrusion | Physical Security | Nominal | N/A | N/A |
> > 'OK'
> > 31 | PS Status | Power Supply | Nominal | N/A | N/A |
> > 'OK'
> > 32 | P1-DIMM1A Temp | Temperature | Nominal | 35.00 | C |
> > 'OK'
> > 33 | P1-DIMM1B Temp | Temperature | N/A | N/A | C |
> > N/A
> > 34 | P1-DIMM2A Temp | Temperature | Nominal | 35.00 | C |
> > 'OK'
> > 35 | P1-DIMM2B Temp | Temperature | N/A | N/A | C |
> > N/A
> > 36 | P1-DIMM3A Temp | Temperature | Nominal | 35.00 | C |
> > 'OK'
> > 37 | P1-DIMM3B Temp | Temperature | N/A | N/A | C |
> > N/A
> > 38 | P2-DIMM1A Temp | Temperature | Nominal | 29.00 | C |
> > 'OK'
> > 39 | P2-DIMM1B Temp | Temperature | N/A | N/A | C |
> > N/A
> > 40 | P2-DIMM2A Temp | Temperature | Nominal | 29.00 | C |
> > 'OK'
> > 41 | P2-DIMM2B Temp | Temperature | N/A | N/A | C |
> > N/A
> > 42 | P2-DIMM3A Temp | Temperature | Nominal | 31.00 | C |
> > 'OK'
> > 43 | P2-DIMM3B Temp | Temperature | N/A | N/A | C |
> > N/A
> >
> > I wonder why the current temperature value is not shown by neither
> > ipmi-sensors nor superodoctor.
> >
> > Some more information about this system:
> >
> > # bmc-info
> > Device ID : 32
> > Device Revision : 1
> > Device SDRs : unsupported
> > Firmware Revision : 2.01
> > Device Available : yes (normal operation)
> > IPMI Version : 2.0
> > Sensor Device : supported
> > SDR Repository Device : supported
> > SEL Device : supported
> > FRU Inventory Device : supported
> > IPMB Event Receiver : supported
> > IPMB Event Generator : supported
> > Bridge : unsupported
> > Chassis Device : supported
> > Manufacturer ID : Super Micro Computer Inc. (47488)
> > Product ID : 43707
> > Auxiliary Firmware Revision Information : 00000001h
> >
> > GUID : 00000000-0000-0000-0000-000000434d53
> >
> > System Firmware Version : rsion1.0
> > System Name : Manager
> > Primary Operating System Name : SE Server 1.0
> > Operating System Name :
> >
> > Channel Information
> >
> > Channel Number : 0
> > Medium Type : IPMB (I2C)
> > Protocol Type : IPMB-1.0
> > Active Session Count : 0
> > Session Support : session-less
> > Vendor ID : Intelligent Platform Management Interface forum
> > (7154)
> >
> > Channel Number : 1
> > Medium Type : 802.3 LAN
> > Protocol Type : IPMB-1.0
> > Active Session Count : 0
> > Session Support : multi-session
> > Vendor ID : Intelligent Platform Management Interface forum
> > (7154)
> >
> > I have tested with freeipmi 1.0.9 on Scientific Linux 6.1.
> >
> > Regards, Götz Waschk
> >
> > _______________________________________________
> > Freeipmi-devel mailing list
> > address@hidden
> > https://lists.gnu.org/mailman/listinfo/freeipmi-devel
--
: Werner Fischer
: Technology Specialist
: Thomas-Krenn.AG | The server-experts
: http://www.thomas-krenn.com | http://www.thomas-krenn.com/wiki