[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Freeipmi-devel] bad sensor name when using entity-sensor-names
From: |
Albert Chu |
Subject: |
Re: [Freeipmi-devel] bad sensor name when using entity-sensor-names |
Date: |
Fri, 19 Jul 2013 13:39:32 -0700 |
On Fri, 2013-07-19 at 14:24 -0400, Andy Cress wrote:
> Al,
>
> IMO, the entity name+num and the sensor name should be separate fields
> so that this is not so confusing, i.e. insert a '|' delimiter between
> the two.
I had actually not considered that. I programmed it like this b/c of a
set of motherboards I saw from Dell. The Dell motherboards had multiple
sensors with a device id of "Temp". So the entity sensor name option
was created so that it would show:
Processor 1 Temp
Processor 2 Temp
Separating it out into two fields was not as "pretty" in this case. I
suppose an option to always output entity id + instance in a column
could be an option.
Al
> Andy
>
> On Fri, Jul 19, 2013 at 2:16 PM, Hank Bruning <address@hidden> wrote:
> > As usual Albert is correct. The root cause of this is IPMI. Note that it's
> > note a problem, it's just the way IPMI works
> > If you use a API, in this case Java
> > http://www.jblade.com/JbDoc2/products/retuli/ipmiDC/doc/programmers/RetuliIpmiCXProgrammersGuideOverview.html
> > It's under sensors reading or SDR repository.
> > to interact with IPMI, there is no problem and you can interpret the output
> > and act acccordingly.
> > Hank Bruning
> >
> >
> > On Fri, Jul 19, 2013 at 1:56 PM, Albert Chu <address@hidden> wrote:
> >>
> >> Hey Corey,
> >>
> >> It's not a bug per-se, it's more of an odd side effect b/c the entity
> >> name + instance number happens to be identical to the device id on your
> >> motherboard. In the case of "Power Supply 1 Power Supply 1" sensor
> >> name, the entity name is "power supply", instance number "1", and device
> >> id "power supply 1".
> >>
> >> In the case of "processor 1 fan 5", the entity name is "processor",
> >> instance id "1", and device id "fan 5", so the entity sensor name works
> >> out nicer.
> >>
> >> Hmmm, I suppose I could add a special case where if "entity-name +
> >> instance" == "device id", then only output one of them.
> >>
> >> If I code such a thing, would you be able to try out a beta tar.gz?
> >>
> >> Al
> >>
> >> On Thu, 2013-07-18 at 20:47 -0700, Corey Osman wrote:
> >> > Hi,
> >> >
> >> > Just curious as to why sensor #4-5 show Power Supply twice for the
> >> > name. Is this a bug with freeipmi or my BMC?
> >> >
> >> > impi-sensors --entity-sensor-names --no-header-output
> >> > --output-sensor-state
> >> >
> >> >
> >> >
> >> > Example sensor data: http://pastebin.com/bhWtBW73
> >> >
> >> >
> >> >
> >> > Corey
> >> > _______________________________________________
> >> > Freeipmi-devel mailing list
> >> > address@hidden
> >> > https://lists.gnu.org/mailman/listinfo/freeipmi-devel
> >> --
> >> Albert Chu
> >> address@hidden
> >> Computer Scientist
> >> High Performance Systems Division
> >> Lawrence Livermore National Laboratory
> >>
> >>
> >>
> >> _______________________________________________
> >> Freeipmi-devel mailing list
> >> address@hidden
> >> https://lists.gnu.org/mailman/listinfo/freeipmi-devel
> >
> >
> >
> > _______________________________________________
> > Freeipmi-devel mailing list
> > address@hidden
> > https://lists.gnu.org/mailman/listinfo/freeipmi-devel
> >
--
Albert Chu
address@hidden
Computer Scientist
High Performance Systems Division
Lawrence Livermore National Laboratory