[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Freeipmi-users] problem with freeipmi 0.5.3 and intel SE7221BK1-E
From: |
Chris Morgan |
Subject: |
Re: [Freeipmi-users] problem with freeipmi 0.5.3 and intel SE7221BK1-E |
Date: |
Mon, 21 Jan 2008 19:29:34 -0500 |
Here is the entire output from dmidecode, aplogizes because its a lot
of text but I wanted the entire output here for reference.
# dmidecode 2.9
SMBIOS 2.3 present.
50 structures occupying 2332 bytes.
Table at 0x000FCFD0.
Handle 0x0000, DMI type 0, 20 bytes
BIOS Information
Vendor: Intel Corporation
Version: SE7221BK1E.86B.P.08.00.0034.063020060918
Release Date: 06/30/2006
Address: 0xF0000
Runtime Size: 64 kB
ROM Size: 2048 kB
Characteristics:
ISA is supported
PCI is supported
PNP is supported
BIOS is upgradeable
BIOS shadowing is allowed
ESCD support is available
Boot from CD is supported
Selectable boot is supported
BIOS ROM is socketed
EDD is supported
Print screen service is supported (int 5h)
8042 keyboard services are supported (int 9h)
Serial services are supported (int 14h)
CGA/mono video services are supported (int 10h)
ACPI is supported
USB legacy is supported
LS-120 boot is supported
ATAPI Zip drive boot is supported
BIOS boot specification is supported
Function key-initiated network boot is supported
Handle 0x0001, DMI type 1, 25 bytes
System Information
Manufacturer: Intel
Product Name:
Version:
Serial Number:
UUID: 57B8F269-3E78-0010-80D8-000E0C4B1C84
Wake-up Type: Power Switch
Handle 0x0002, DMI type 2, 15 bytes
Base Board Information
Manufacturer: Intel
Product Name: SE7221BK1E
Version: FRU V0.01
Serial Number: QTFMVO53700456
Asset Tag:
Features:
Board is a hosting board
Board is replaceable
Location In Chassis:
Chassis Handle: 0x0003
Type: Motherboard
Contained Object Handles: 0
Handle 0x0003, DMI type 3, 21 bytes
Chassis Information
Manufacturer:
Type: Rack Mount Chassis
Lock: Not Present
Version:
Serial Number: ESDW6060367
Asset Tag:
Boot-up State: Safe
Power Supply State: Safe
Thermal State: Safe
Security Status: None
OEM Information: 0x00000000
Height: Unspecified
Number Of Power Cords: 1
Contained Elements: 0
Handle 0x0004, DMI type 4, 35 bytes
Processor Information
Socket Designation: CPU 1
Type: Central Processor
Family: Pentium 4
Manufacturer: Intel
ID: 41 0F 00 00 FF FB EB BF
Signature: Type 0, Family 15, Model 4, Stepping 1
Flags:
FPU (Floating-point unit on-chip)
VME (Virtual mode extension)
DE (Debugging extension)
PSE (Page size extension)
TSC (Time stamp counter)
MSR (Model specific registers)
PAE (Physical address extension)
MCE (Machine check exception)
CX8 (CMPXCHG8 instruction supported)
APIC (On-chip APIC hardware supported)
SEP (Fast system call)
MTRR (Memory type range registers)
PGE (Page global enable)
MCA (Machine check architecture)
CMOV (Conditional move instruction supported)
PAT (Page attribute table)
PSE-36 (36-bit page size extension)
CLFSH (CLFLUSH instruction supported)
DS (Debug store)
ACPI (ACPI supported)
MMX (MMX technology supported)
FXSR (Fast floating-point save and restore)
SSE (Streaming SIMD extensions)
SSE2 (Streaming SIMD extensions 2)
SS (Self-snoop)
HTT (Hyper-threading technology)
TM (Thermal monitor supported)
PBE (Pending break enabled)
Version: Intel(R) Pentium(R) 4 CPU 3.00GHz
Voltage: 3.3 V 2.9 V
External Clock: 200 MHz
Max Speed: 3000 MHz
Current Speed: 3000 MHz
Status: Populated, Enabled
Upgrade: Other
L1 Cache Handle: 0x0005
L2 Cache Handle: 0x0006
L3 Cache Handle: Not Provided
Serial Number:
Asset Tag:
Part Number:
Handle 0x0005, DMI type 7, 19 bytes
Cache Information
Socket Designation: L1-Cache
Configuration: Enabled, Not Socketed, Level 1
Operational Mode: Varies With Memory Address
Location: Internal
Installed Size: 16 KB
Maximum Size: 16 KB
Supported SRAM Types:
Pipeline Burst
Installed SRAM Type: Pipeline Burst
Speed: Unknown
Error Correction Type: Single-bit ECC
System Type: Data
Associativity: 8-way Set-associative
Handle 0x0006, DMI type 7, 19 bytes
Cache Information
Socket Designation: L2-Cache
Configuration: Enabled, Not Socketed, Level 2
Operational Mode: Varies With Memory Address
Location: Internal
Installed Size: 1024 KB
Maximum Size: 1024 KB
Supported SRAM Types:
Pipeline Burst
Installed SRAM Type: Pipeline Burst
Speed: Unknown
Error Correction Type: Single-bit ECC
System Type: Unified
Associativity: 8-way Set-associative
Handle 0x0007, DMI type 126, 19 bytes
Inactive
Handle 0x0008, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: KM1
Internal Connector Type: PS/2
External Reference Designator: PS2Mouse
External Connector Type: PS/2
Port Type: Mouse Port
Handle 0x0009, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: KM
Internal Connector Type: PS/2
External Reference Designator: Keyboard
External Connector Type: PS/2
Port Type: Keyboard Port
Handle 0x000A, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J3
Internal Connector Type: Access Bus (USB)
External Reference Designator: USB1
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x000B, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J3
Internal Connector Type: Access Bus (USB)
External Reference Designator: USB2
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x000C, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J10
Internal Connector Type: DB-15 female
External Reference Designator: VGA
External Connector Type: DB-15 male
Port Type: Video Port
Handle 0x000D, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J10
Internal Connector Type: DB-9 male
External Reference Designator: COM A
External Connector Type: DB-9 female
Port Type: Serial Port 16550A Compatible
Handle 0x000E, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J11
Internal Connector Type: RJ-45
External Reference Designator: LAN
External Connector Type: RJ-45
Port Type: Network Port
Handle 0x000F, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J12
Internal Connector Type: RJ-45
External Reference Designator: LAN
External Connector Type: RJ-45
Port Type: Network Port
Handle 0x0010, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: JP1 - FLOPPY
Internal Connector Type: On Board Floppy
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x0011, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J4 - FNT USB 3-4
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x0012, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J5 - SATA_0
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x0013, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J6 - SATA_1
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x0014, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J7 - SATA_2
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x0015, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J8 - SATA_3
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x0016, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J9 - PRI IDE
Internal Connector Type: On Board IDE
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x0017, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J23 - COM B
Internal Connector Type: DB-9 male
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Serial Port 16550A Compatible
Handle 0x0018, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J27 - FRONT PNL
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x0019, DMI type 9, 13 bytes
System Slot Information
Designation: PCI6
Type: 64-bit PCI Express
Current Usage: Available
Length: Short
ID: 0
Characteristics:
3.3 V is provided
Opening is shared
PME signal is supported
Handle 0x001A, DMI type 9, 13 bytes
System Slot Information
Designation: PCI5
Type: 64-bit PCI-X
Current Usage: Available
Length: Short
ID: 1
Characteristics:
3.3 V is provided
Opening is shared
PME signal is supported
Handle 0x001B, DMI type 9, 13 bytes
System Slot Information
Designation: PCI4
Type: 64-bit PCI-X
Current Usage: Available
Length: Short
ID: 2
Characteristics:
3.3 V is provided
Opening is shared
PME signal is supported
Handle 0x001C, DMI type 9, 13 bytes
System Slot Information
Designation: PCI1
Type: 32-bit PCI
Current Usage: Available
Length: Short
ID: 3
Characteristics:
5.0 V is provided
Opening is shared
PME signal is supported
Handle 0x001D, DMI type 10, 6 bytes
On Board Device Information
Type: Video
Status: Enabled
Description: INTEL I.G.D.
Handle 0x001E, DMI type 10, 6 bytes
On Board Device Information
Type: Ethernet
Status: Enabled
Description: INTEL 82541PI
Handle 0x001F, DMI type 10, 6 bytes
On Board Device Information
Type: Ethernet
Status: Enabled
Description: INTEL 82541PI
Handle 0x0020, DMI type 11, 5 bytes
OEM Strings
String 1: To Be Filled By O.E.M.
Handle 0x0021, DMI type 12, 5 bytes
System Configuration Options
Option 1: J1f2 :2-3 Close to clear CMOS
Option 2: J1F2 :6-7 Close to clear password
Option 3: J1F2 :10-11 Close to boot in recovery
Option 4: JP1E1:BIOS select pin
Handle 0x0022, DMI type 13, 22 bytes
BIOS Language Information
Installable Languages: 5
en|US|iso8859-1
fr|FR|iso8859-1
de|DE|iso8859-1
it|IT|iso8859-1
es|ES|iso8859-1
Currently Installed Language: en|US|iso8859-1
Handle 0x0023, DMI type 16, 15 bytes
Physical Memory Array
Location: System Board Or Motherboard
Use: System Memory
Error Correction Type: Single-bit ECC
Maximum Capacity: 4 GB
Error Information Handle: Not Provided
Number Of Devices: 4
Handle 0x0024, DMI type 19, 15 bytes
Memory Array Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0007FFFFFFF
Range Size: 2 GB
Physical Array Handle: 0x0023
Partition Width: 0
Handle 0x0025, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x0023
Error Information Handle: Not Provided
Total Width: 72 bits
Data Width: 64 bits
Size: 512 MB
Form Factor: DIMM
Set: 2
Locator: DIMM_1A
Bank Locator: BANK0
Type: DDR
Type Detail: Synchronous
Speed: 533 MHz (1.9 ns)
Manufacturer: Manufacturer0
Serial Number: SerNum0
Asset Tag: AssetTagNum0
Part Number: PartNum0
Handle 0x0026, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0001FFFFFFF
Range Size: 512 MB
Physical Device Handle: 0x0025
Memory Array Mapped Address Handle: 0x0024
Partition Row Position: 1
Interleaved Data Depth: 1
Handle 0x0027, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x0023
Error Information Handle: Not Provided
Total Width: 72 bits
Data Width: 64 bits
Size: 512 MB
Form Factor: DIMM
Set: 2
Locator: DIMM_2A
Bank Locator: BANK1
Type: DDR
Type Detail: Synchronous
Speed: 533 MHz (1.9 ns)
Manufacturer: Manufacturer1
Serial Number: SerNum1
Asset Tag: AssetTagNum1
Part Number: PartNum1
Handle 0x0028, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00020000000
Ending Address: 0x0003FFFFFFF
Range Size: 512 MB
Physical Device Handle: 0x0027
Memory Array Mapped Address Handle: 0x0024
Partition Row Position: 1
Interleaved Data Depth: 1
Handle 0x0029, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x0023
Error Information Handle: Not Provided
Total Width: 72 bits
Data Width: 64 bits
Size: 512 MB
Form Factor: DIMM
Set: 1
Locator: DIMM_1B
Bank Locator: BANK0
Type: DDR
Type Detail: Synchronous
Speed: 533 MHz (1.9 ns)
Manufacturer: Manufacturer2
Serial Number: SerNum2
Asset Tag: AssetTagNum2
Part Number: PartNum2
Handle 0x002A, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00040000000
Ending Address: 0x0005FFFFFFF
Range Size: 512 MB
Physical Device Handle: 0x0029
Memory Array Mapped Address Handle: 0x0024
Partition Row Position: 1
Interleaved Data Depth: 1
Handle 0x002B, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x0023
Error Information Handle: Not Provided
Total Width: 72 bits
Data Width: 64 bits
Size: 512 MB
Form Factor: DIMM
Set: 1
Locator: DIMM_2B
Bank Locator: BANK1
Type: DDR
Type Detail: Synchronous
Speed: 533 MHz (1.9 ns)
Manufacturer: Manufacturer3
Serial Number: SerNum3
Asset Tag: AssetTagNum3
Part Number: PartNum3
Handle 0x002C, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00060000000
Ending Address: 0x0007FFFFFFF
Range Size: 512 MB
Physical Device Handle: 0x002B
Memory Array Mapped Address Handle: 0x0024
Partition Row Position: 1
Interleaved Data Depth: 1
Handle 0x002D, DMI type 24, 5 bytes
Hardware Security
Power-On Password Status: Disabled
Keyboard Password Status: Disabled
Administrator Password Status: Disabled
Front Panel Reset Status: Enabled
Handle 0x002E, DMI type 30, 6 bytes
Out-of-band Remote Access
Manufacturer Name: INTEL
Inbound Connection: Disabled
Outbound Connection: Enabled
Handle 0x002F, DMI type 32, 20 bytes
System Boot Information
Status: No errors detected
Handle 0x0030, DMI type 38, 18 bytes
IPMI Device Information
Interface Type: SSIF (SMBus System Interface)
Specification Version: 1.5
I2C Slave Address: 0x42
NV Storage Device Address: 0
Base Address: 0x42 (SMBus)
Handle 0x0031, DMI type 127, 4 bytes
End Of Table
Looking at the end of the output from ipmi-locate:
KCS device default values:
IPMI Version: 1.5
IPMI locate driver: DEFAULT
IPMI interface: KCS
BMC driver device:
BMC I/O base address: CA2
Register spacing: 1
SMIC device default values:
IPMI Version: 1.5
IPMI locate driver: DEFAULT
IPMI interface: SMIC
BMC driver device:
BMC I/O base address: CA9
Register spacing: 1
BT device default values:
ipmi-locate-defaults.c: 49: ipmi_locate_defaults_get_dev_info: errno
(22): expression failed
SSIF device default values:
IPMI Version: 1.5
IPMI locate driver: DEFAULT
IPMI interface: SSIF
BMC driver device: /dev/i2c-0
BMC SMBUS slave address: 42
Register spacing: 1
It looks like the SSIF information matches the output at the very end
of dmidecode for SSIF.
Chris
On Jan 21, 2008 7:10 AM, Bala.A <address@hidden> wrote:
>
> dmidecode code is used inside device probing. If there is a difference in
> ipmi-locate and latest dmidecode output, then we need to update our
> dmidecode device probing code.
>
> Regards,
> Bala
> ---
> Free as in freedom
> http://www.gnu.org/
>
>
>
> > I don't think this would be a kernel related issue. Bala, you have any
> > ideas?
> >
> > Al
> >
> >> Any more ideas? Have there been any important kernel changes that
> >> should cause me to try to upgrade to 2.6.24?
> >>
> >> Chris
> >>
> >>
> >>
> >> On Jan 17, 2008 11:44 AM, Chris Morgan <address@hidden> wrote:
> >>>
> >>> On Jan 17, 2008 11:36 AM, Albert Chu <address@hidden> wrote:
> >>> >
> >>> >
> >>> > > Hi Bala. Thank you for replying.
> >>> > >
> >>> > > On Jan 16, 2008 11:10 PM, Bala.A <address@hidden> wrote:
> >>> > >>
> >>> > >> Hi,
> >>> > >>
> >>> > >> Please find inline replies
> >>> > >>
> >>> > >> >
> >>> > >> > # ipmi-locate
> >>> > >> > Probing KCS device using DMIDECODE... FAILED
> >>> > >> >
> >>> > >> > Probing SMIC device using DMIDECODE... FAILED
> >>> > >> >
> >>> > >> > Probing BT device using DMIDECODE... FAILED
> >>> > >> >
> >>> > >> > Probing SSIF device using DMIDECODE... done
> >>> > >> > IPMI Version: 1.5
> >>> > >> > IPMI locate driver: DMIDECODE
> >>> > >> > IPMI interface: SSIF
> >>> > >> > BMC driver device: /dev/i2c-0
> >>> > >> > BMC SMBUS slave address: 42
> >>> > >> > Register spacing: 1
> >>> > >> >
> >>> > >> > Probing KCS device using SMBIOS... FAILED
> >>> > >> > Probing SMIC device using SMBIOS... FAILED
> >>> > >> > Probing BT device using SMBIOS... FAILED
> >>> > >> >
> >>> > >> > Probing SSIF device using SMBIOS... done
> >>> > >> > IPMI Version: 1.5
> >>> > >> > IPMI locate driver: SMBIOS
> >>> > >> > IPMI interface: SSIF
> >>> > >> > BMC driver device: /dev/i2c-0
> >>> > >> > BMC SMBUS slave address: 84
> >>> > >> > Register spacing: 1
> >>> > >> >
> >>> > >>
> >>> > >> Please try the following commands and let me know they work or not
> >>> > >>
> >>> > >> bmc-info --no-probing -D SSIF --driver-address=42
> >>> > >> --driver-device=/dev/i2c-0 --register-spacing=1
> >>> > >>
> >>> > >> bmc-info --no-probing -D SSIF --driver-address=84
> >>> > >> --driver-device=/dev/i2c-0 --register-spacing=1
> >>> > >>
> >>> > >
> >>> > >
> >>> > > address@hidden:~# ls /dev/i2c*
> >>> > > /dev/i2c-0
> >>> > >
> >>> > > address@hidden:~# lsmod | grep i2c
> >>> > > i2c_i801 10128 0
> >>> > > i2c_dev 8708 0
> >>> > > i2c_core 26112 2 i2c_i801,i2c_dev
> >>> > >
> >>> > > address@hidden:~# lspci
> >>> > > 00:00.0 Host bridge: Intel Corporation E7220/E7221 Memory
> >>> Controller
> >>> > > Hub (rev 05)
> >>> > > 00:02.0 VGA compatible controller: Intel Corporation E7221
> >>> Integrated
> >>> > > Graphics Controller (rev 05)
> >>> > > 00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
> >>> > > Family) PCI Express Port 1 (rev 03)
> >>> > > 00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW
> >>> (ICH6
> >>> > > Family) USB UHCI #1 (rev 03)
> >>> > > 00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW
> >>> (ICH6
> >>> > > Family) USB UHCI #2 (rev 03)
> >>> > > 00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW
> >>> (ICH6
> >>> > > Family) USB UHCI #3 (rev 03)
> >>> > > 00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW
> >>> (ICH6
> >>> > > Family) USB2 EHCI Controller (rev 03)
> >>> > > 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev d3)
> >>> > > 00:1f.0 ISA bridge: Intel Corporation 82801FB/FR (ICH6/ICH6R) LPC
> >>> > > Interface Bridge (rev 03)
> >>> > > 00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW
> >>> (ICH6
> >>> > > Family) IDE Controller (rev 03)
> >>> > > 00:1f.2 IDE interface: Intel Corporation 82801FR/FRW (ICH6R/ICH6RW)
> >>> > > SATA Controller (rev 03)
> >>> > > 00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
> >>> Family)
> >>> > > SMBus Controller (rev 03)
> >>> > > 01:03.0 Ethernet controller: Intel Corporation 82541GI Gigabit
> >>> > > Ethernet Controller (rev 05)
> >>> > > 02:00.0 PCI bridge: Intel Corporation 6700PXH PCI Express-to-PCI
> >>> > > Bridge A (rev 09)
> >>> > > 02:00.2 PCI bridge: Intel Corporation 6700PXH PCI Express-to-PCI
> >>> > > Bridge B (rev 09)
> >>> > > 04:03.0 Ethernet controller: Intel Corporation 82541GI Gigabit
> >>> > > Ethernet Controller (rev 05)
> >>> > >
> >>> > > address@hidden:~# bmc-info --no-probing -D SSIF --driver-address=42
> >>> > > --driver-device=/dev/i2c-0 --register-spacing=1
> >>> > > ipmi-ssif-api-udm.c: 81: ipmi_ssif_cmd_udm: errnum (4): expression
> >>> failed
> >>> > > ipmi_cmd_get_device_id: permission denied
> >>> > >
> >>> > > address@hidden:~# bmc-info --no-probing -D SSIF --driver-address=84
> >>> > > --driver-device=/dev/i2c-0 --register-spacing=1
> >>> > > ipmi-ssif-api-udm.c: 81: ipmi_ssif_cmd_udm: errnum (4): expression
> >>> failed
> >>> > > ipmi_cmd_get_device_id: permission denied
> >>> >
> >>> > Bala, FYI line 81 is a call to 'ipmi_ssif_write'.
> >>> >
> >>> > errnum 4 in the ssif lib is IPMI_SSIF_CTX_ERR_PERMISSION.
> >>> >
> >>> > the errnum seems to be set via this code chunk:
> >>> >
> >>> > if (buf_len <= IPMI_I2C_SMBUS_BLOCK_MAX)
> >>> > {
> >>> > count = ipmi_ssif_single_part_write (ctx->device_fd,
> >>> > buf,
> >>> > buf_len);
> >>> > }
> >>> > else
> >>> > {
> >>> > count = ipmi_ssif_multi_part_write (ctx->device_fd,
> >>> > buf,
> >>> > buf_len);
> >>> > }
> >>> >
> >>> > if (count < 0)
> >>> > {
> >>> > if (errno == EACCES || errno == EPERM)
> >>> > ctx->errnum = IPMI_SSIF_CTX_ERR_PERMISSION;
> >>> > else
> >>> > ERR_LOG(ctx->errnum = IPMI_SSIF_CTX_ERR_SYSTEM_ERROR);
> >>> > goto cleanup;
> >>> > }
> >>> >
> >>> > tracing this into the deeper write calls, the errno is coming from
> >>> the
> >>> > core ioctl() call for ssif.
> >>> >
> >>> > It looks like Chris is root above, so EACCES is not the likely
> >>> returned
> >>> > errno, EPERM = "Operation Not Permitted" is. So the question is why
> >>> is
> >>> > the ioctl not allowed.
> >>> >
> >>> > Chris, does anything interesting show up in the 'dmesg' logs?
> >>> >
> >>>
> >>> You know I checked to see if there might have been something going on
> >>> but this is the end of dmesg:
> >>>
> >>> ...
> >>> [ 67.895740] input: Power Button (CM) as /class/input/input3
> >>> [ 67.895768] ACPI: Power Button (CM) [PWRB]
> >>> [ 68.882998] NET: Registered protocol family 10
> >>> [ 68.883919] lo: Disabled Privacy Extensions
> >>> [ 79.554513] eth0: no IPv6 routers present
> >>> [ 381.528584] i2c /dev entries driver
> >>> [ 386.804841] ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level,
> >>> low) -> IRQ 20
> >>>
> >>> Chris
> >>>
> >>
> >
> >
> > --
> > Albert Chu
> > address@hidden
> > 925-422-5311
> > Computer Scientist
> > High Performance Systems Division
> > Lawrence Livermore National Laboratory
> >
>
>
>
>
> _______________________________________________
> Freeipmi-users mailing list
> address@hidden
> http://lists.gnu.org/mailman/listinfo/freeipmi-users
>
- Re: [Freeipmi-users] problem with freeipmi 0.5.3 and intel SE7221BK1-E, (continued)
- Re: [Freeipmi-users] problem with freeipmi 0.5.3 and intel SE7221BK1-E, Chris Morgan, 2008/01/16
- Re: [Freeipmi-users] problem with freeipmi 0.5.3 and intel SE7221BK1-E, Albert Chu, 2008/01/16
- Re: [Freeipmi-users] problem with freeipmi 0.5.3 and intel SE7221BK1-E, Chris Morgan, 2008/01/16
- Re: [Freeipmi-users] problem with freeipmi 0.5.3 and intel SE7221BK1-E, Bala.A, 2008/01/16
- Re: [Freeipmi-users] problem with freeipmi 0.5.3 and intel SE7221BK1-E, Chris Morgan, 2008/01/17
- Re: [Freeipmi-users] problem with freeipmi 0.5.3 and intel SE7221BK1-E, Albert Chu, 2008/01/17
- Re: [Freeipmi-users] problem with freeipmi 0.5.3 and intel SE7221BK1-E, Chris Morgan, 2008/01/17
- Re: [Freeipmi-users] problem with freeipmi 0.5.3 and intel SE7221BK1-E, Chris Morgan, 2008/01/19
- Re: [Freeipmi-users] problem with freeipmi 0.5.3 and intel SE7221BK1-E, Albert Chu, 2008/01/19
- Re: [Freeipmi-users] problem with freeipmi 0.5.3 and intel SE7221BK1-E, Bala.A, 2008/01/21
- Re: [Freeipmi-users] problem with freeipmi 0.5.3 and intel SE7221BK1-E,
Chris Morgan <=
- Re: [Freeipmi-users] problem with freeipmi 0.5.3 and intel SE7221BK1-E, Bala.A, 2008/01/22
- Re: [Freeipmi-users] problem with freeipmi 0.5.3 and intel SE7221BK1-E, Chris Morgan, 2008/01/22
- Re: [Freeipmi-users] problem with freeipmi 0.5.3 and intel SE7221BK1-E, Al Chu, 2008/01/22
- Re: [Freeipmi-users] problem with freeipmi 0.5.3 and intel SE7221BK1-E, Al Chu, 2008/01/22
- Re: [Freeipmi-users] problem with freeipmi 0.5.3 and intel SE7221BK1-E, Chris Morgan, 2008/01/22
- Re: [Freeipmi-users] problem with freeipmi 0.5.3 and intel SE7221BK1-E, Al Chu, 2008/01/22
- Re: [Freeipmi-users] problem with freeipmi 0.5.3 and intel SE7221BK1-E, Chris Morgan, 2008/01/22
- Re: [Freeipmi-users] problem with freeipmi 0.5.3 and intel SE7221BK1-E, Chris Morgan, 2008/01/22
- Re: [Freeipmi-users] problem with freeipmi 0.5.3 and intel SE7221BK1-E, Al Chu, 2008/01/22
- Re: [Freeipmi-users] problem with freeipmi 0.5.3 and intel SE7221BK1-E, Chris Morgan, 2008/01/22