[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Freeipmi-users] problem with freeipmi 0.5.3 and intel SE7221BK1-E
From: |
Chris Morgan |
Subject: |
Re: [Freeipmi-users] problem with freeipmi 0.5.3 and intel SE7221BK1-E |
Date: |
Tue, 22 Jan 2008 21:05:41 -0500 |
Sorry about that. Didn't realize you wanted all of the device options
in there. Here is the output in its own mail so its clearer:
address@hidden:~# bmc-config --list --no-probing -D SSIF
--driver-address=0x42 --driver-device=/dev/i2c-0 --register-spacing=1
--debug
================================================================
[ VALUE TAG NAME:LENGTH ]
================================================================
[ 1h] = cmd[ 8b]
================================================================
================================================================
[ VALUE TAG NAME:LENGTH ]
================================================================
[ 1h] = cmd[ 8b]
[ 0h] = comp_code[ 8b]
[ 20h] = device_id[ 8b]
[ 1h] = device_revision.revision[ 4b]
[ 0h] = device_revision.reserved1[ 3b]
[ 1h] = device_revision.sdr_support[ 1b]
[ 2h] = firmware_revision1.major_revision[ 7b]
[ 0h] = firmware_revision1.device_available[ 1b]
[ 40h] = firmware_revision2.minor_revision[ 8b]
[ 1h] = ipmi_version.ms_bits[ 4b]
[ 5h] = ipmi_version.ls_bits[ 4b]
[ 1h] = additional_device_support.sensor_device[ 1b]
[ 1h] = additional_device_support.sdr_repository_device[ 1b]
[ 1h] = additional_device_support.sel_device[ 1b]
[ 1h] = additional_device_support.fru_inventory_device[ 1b]
[ 1h] = additional_device_support.ipmb_event_receiver[ 1b]
[ 0h] = additional_device_support.ipmb_event_generator[ 1b]
[ 0h] = additional_device_support.bridge[ 1b]
[ 1h] = additional_device_support.chassis_device[ 1b]
[ 157h] = manufacturer_id.id[20b]
[ 0h] = manufacturer_id.reserved1[ 4b]
[ 4311h] = product_id[16b]
================================================================
================================================================
[ VALUE TAG NAME:LENGTH ]
================================================================
[ 42h] = cmd[ 8b]
[ 0h] = channel_number[ 4b]
[ 0h] = reserved[ 4b]
================================================================
================================================================
[ VALUE TAG NAME:LENGTH ]
================================================================
[ 42h] = cmd[ 8b]
[ C9h] = comp_code[ 8b]
================================================================
ipmi_check_completion_code: completion code invalid: c9
ipmi_check_completion_code: completion code invalid: c9
ipmi_check_completion_code: completion code invalid: c9
ipmi_check_completion_code: completion code invalid: c9
ipmi_check_completion_code: completion code invalid: c9
ipmi_check_completion_code: completion code invalid: c9
ipmi_check_completion_code: completion code invalid: c9
ipmi_check_completion_code: completion code invalid: c9
ipmi_check_completion_code: completion code invalid: c9
ipmi_check_completion_code: completion code invalid: c9
ipmi_check_completion_code: completion code invalid: c9
ipmi-messaging-support-cmds-udm.c: 383: ipmi_cmd_get_channel_info:
errmsg = Parameter out of range. One or more parameters in the data
field of the Request are out of range. This is different from
'Invalid data field' (CCh) code in that it indicates that the
erroneous field(s) has a contiguous range of possible values.
================================================================
[ VALUE TAG NAME:LENGTH ]
================================================================
[ 42h] = cmd[ 8b]
[ 1h] = channel_number[ 4b]
[ 0h] = reserved[ 4b]
================================================================
================================================================
[ VALUE TAG NAME:LENGTH ]
================================================================
[ 42h] = cmd[ 8b]
[ 0h] = comp_code[ 8b]
[ 1h] = actual_channel_number[ 4b]
[ 0h] = actual_channel_number.reserved[ 4b]
[ 4h] = channel_medium_type[ 7b]
[ 0h] = channel_medium_type.reserved[ 1b]
[ 1h] = channel_protocol_type[ 5b]
[ 0h] = channel_protocol_type.reserved[ 3b]
[ 0h] = active_session_count[ 6b]
[ 2h] = session_support[ 2b]
[ 157h] = vendor_id[24b]
[ 0h] = auxiliary_channel_info[16b]
================================================================
================================================================
[ VALUE TAG NAME:LENGTH ]
================================================================
[ 44h] = cmd[ 8b]
[ 1h] = channel_number[ 4b]
[ 0h] = reserved1[ 4b]
[ 1h] = user_id[ 6b]
[ 0h] = reserved2[ 2b]
================================================================
================================================================
[ VALUE TAG NAME:LENGTH ]
================================================================
[ 44h] = cmd[ 8b]
[ 0h] = comp_code[ 8b]
[ 1h] = max_channel_user_ids[ 6b]
[ 0h] = reserved1[ 2b]
[ 1h] = current_channel_user_ids[ 6b]
[ 0h] = user_id_enable_status[ 2b]
[ 1h] = current_channel_fixed_names[ 6b]
[ 0h] = reserved2[ 2b]
[ 4h] = user_privilege_level_limit[ 4b]
[ 1h] = user_ipmi_messaging[ 1b]
[ 1h] = user_link_authentication[ 1b]
[ 0h] = user_restricted_to_callback[ 1b]
[ 0h] = reserved3[ 1b]
================================================================
User1
Lan_Channel
Lan_Conf
Lan_Conf_Auth
Lan_Conf_Security_Keys
Lan_Conf_Misc
Rmcpplus_Conf_Privilege
Serial_Channel
Serial_Conf
SOL_Conf
Misc
address@hidden:~# pef-config --list --no-probing -D SSIF
--driver-address=0x42 --driver-device=/dev/i2c-0 --register-spacing=1
--debug
================================================================
[ VALUE TAG NAME:LENGTH ]
================================================================
[ 1h] = cmd[ 8b]
================================================================
================================================================
[ VALUE TAG NAME:LENGTH ]
================================================================
[ 1h] = cmd[ 8b]
[ 0h] = comp_code[ 8b]
[ 20h] = device_id[ 8b]
[ 1h] = device_revision.revision[ 4b]
[ 0h] = device_revision.reserved1[ 3b]
[ 1h] = device_revision.sdr_support[ 1b]
[ 2h] = firmware_revision1.major_revision[ 7b]
[ 0h] = firmware_revision1.device_available[ 1b]
[ 40h] = firmware_revision2.minor_revision[ 8b]
[ 1h] = ipmi_version.ms_bits[ 4b]
[ 5h] = ipmi_version.ls_bits[ 4b]
[ 1h] = additional_device_support.sensor_device[ 1b]
[ 1h] = additional_device_support.sdr_repository_device[ 1b]
[ 1h] = additional_device_support.sel_device[ 1b]
[ 1h] = additional_device_support.fru_inventory_device[ 1b]
[ 1h] = additional_device_support.ipmb_event_receiver[ 1b]
[ 0h] = additional_device_support.ipmb_event_generator[ 1b]
[ 0h] = additional_device_support.bridge[ 1b]
[ 1h] = additional_device_support.chassis_device[ 1b]
[ 157h] = manufacturer_id.id[20b]
[ 0h] = manufacturer_id.reserved1[ 4b]
[ 4311h] = product_id[16b]
================================================================
================================================================
[ VALUE TAG NAME:LENGTH ]
================================================================
[ 42h] = cmd[ 8b]
[ 0h] = channel_number[ 4b]
[ 0h] = reserved[ 4b]
================================================================
================================================================
[ VALUE TAG NAME:LENGTH ]
================================================================
[ 42h] = cmd[ 8b]
[ C9h] = comp_code[ 8b]
================================================================
ipmi_check_completion_code: completion code invalid: c9
ipmi_check_completion_code: completion code invalid: c9
ipmi_check_completion_code: completion code invalid: c9
ipmi_check_completion_code: completion code invalid: c9
ipmi_check_completion_code: completion code invalid: c9
ipmi_check_completion_code: completion code invalid: c9
ipmi_check_completion_code: completion code invalid: c9
ipmi_check_completion_code: completion code invalid: c9
ipmi_check_completion_code: completion code invalid: c9
ipmi_check_completion_code: completion code invalid: c9
ipmi_check_completion_code: completion code invalid: c9
ipmi-messaging-support-cmds-udm.c: 383: ipmi_cmd_get_channel_info:
errmsg = Parameter out of range. One or more parameters in the data
field of the Request are out of range. This is different from
'Invalid data field' (CCh) code in that it indicates that the
erroneous field(s) has a contiguous range of possible values.
================================================================
[ VALUE TAG NAME:LENGTH ]
================================================================
[ 42h] = cmd[ 8b]
[ 1h] = channel_number[ 4b]
[ 0h] = reserved[ 4b]
================================================================
================================================================
[ VALUE TAG NAME:LENGTH ]
================================================================
[ 42h] = cmd[ 8b]
[ 0h] = comp_code[ 8b]
[ 1h] = actual_channel_number[ 4b]
[ 0h] = actual_channel_number.reserved[ 4b]
[ 4h] = channel_medium_type[ 7b]
[ 0h] = channel_medium_type.reserved[ 1b]
[ 1h] = channel_protocol_type[ 5b]
[ 0h] = channel_protocol_type.reserved[ 3b]
[ 0h] = active_session_count[ 6b]
[ 2h] = session_support[ 2b]
[ 157h] = vendor_id[24b]
[ 0h] = auxiliary_channel_info[16b]
================================================================
================================================================
[ VALUE TAG NAME:LENGTH ]
================================================================
[ 2h] = cmd[ 8b]
[ 1h] = channel_number[ 4b]
[ 0h] = reserved1[ 3b]
[ 0h] = get_parameter[ 1b]
[ 11h] = parameter_selector[ 8b]
[ 0h] = set_selector[ 8b]
[ 0h] = block_selector[ 8b]
================================================================
================================================================
[ VALUE TAG NAME:LENGTH ]
================================================================
[ 0h] = cmd[ 8b]
[ 0h] = comp_code[ 8b]
[ 0h] = present_revision[ 4b]
[ 0h] = oldest_revision_parameter[ 4b]
[ 0h] = number_of_lan_destinations[ 4b]
[ 0h] = reserved[ 4b]
================================================================
================================================================
[ VALUE TAG NAME:LENGTH ]
================================================================
[ 13h] = cmd[ 8b]
[ 8h] = parameter_selector[ 7b]
[ 0h] = get_parameter[ 1b]
[ 0h] = set_selector[ 8b]
[ 0h] = block_selector[ 8b]
================================================================
================================================================
[ VALUE TAG NAME:LENGTH ]
================================================================
[ 13h] = cmd[ 8b]
[ 0h] = comp_code[ 8b]
[ 1h] = present_revision[ 4b]
[ 1h] = oldest_revision_parameter[ 4b]
[ 1h] = number_of_alert_policy_entries[ 7b]
[ 0h] = reserved[ 1b]
================================================================
================================================================
[ VALUE TAG NAME:LENGTH ]
================================================================
[ 13h] = cmd[ 8b]
[ Bh] = parameter_selector[ 7b]
[ 0h] = get_parameter[ 1b]
[ 0h] = set_selector[ 8b]
[ 0h] = block_selector[ 8b]
================================================================
================================================================
[ VALUE TAG NAME:LENGTH ]
================================================================
[ 13h] = cmd[ 8b]
[ 0h] = comp_code[ 8b]
[ 1h] = present_revision[ 4b]
[ 1h] = oldest_revision_parameter[ 4b]
[ 0h] = number_of_alert_strings[ 7b]
[ 0h] = reserved[ 1b]
================================================================
================================================================
[ VALUE TAG NAME:LENGTH ]
================================================================
[ 13h] = cmd[ 8b]
[ 5h] = parameter_selector[ 7b]
[ 0h] = get_parameter[ 1b]
[ 0h] = set_selector[ 8b]
[ 0h] = block_selector[ 8b]
================================================================
================================================================
[ VALUE TAG NAME:LENGTH ]
================================================================
[ 13h] = cmd[ 8b]
[ 0h] = comp_code[ 8b]
[ 1h] = present_revision[ 4b]
[ 1h] = oldest_revision_parameter[ 4b]
[ 1Eh] = number_of_event_filters[ 7b]
[ 0h] = reserved[ 1b]
================================================================
PEF_Conf
Community_String
Alert_Policy_1
Event_Filter_1
Event_Filter_2
Event_Filter_3
Event_Filter_4
Event_Filter_5
Event_Filter_6
Event_Filter_7
Event_Filter_8
Event_Filter_9
Event_Filter_10
Event_Filter_11
Event_Filter_12
Event_Filter_13
Event_Filter_14
Event_Filter_15
Event_Filter_16
Event_Filter_17
Event_Filter_18
Event_Filter_19
Event_Filter_20
Event_Filter_21
Event_Filter_22
Event_Filter_23
Event_Filter_24
Event_Filter_25
Event_Filter_26
Event_Filter_27
Event_Filter_28
Event_Filter_29
Event_Filter_30
address@hidden:~# ipmi-chassis -c --no-probing -D SSIF
--driver-address=0x42 --driver-device=/dev/i2c-0 --register-spacing=1
--debug
================================================================
[ VALUE TAG NAME:LENGTH ]
================================================================
[ 0h] = cmd[ 8b]
================================================================
================================================================
[ VALUE TAG NAME:LENGTH ]
================================================================
[ 0h] = cmd[ 8b]
[ 0h] = comp_code[ 8b]
[ 1h] = capabilities_flags.intrusion_sensor[ 1b]
[ 0h] = capabilities_flags.front_panel_lockout[ 1b]
[ 1h] = capabilities_flags.diagnostic_interrupt[ 1b]
[ 0h] = capabilities_flags.power_interlock[ 1b]
[ 0h] = capabilities_flags.reserved[ 4b]
[ 84h] = fru_info_device_address[ 8b]
[ 84h] = sdr_device_address[ 8b]
[ 84h] = sel_device_address[ 8b]
[ 0h] = system_management_device_address[ 8b]
[ 0h] = bridge_device_address[ 8b]
================================================================
Intrusion Sensor : Provided
Front Panel Lockout : Not Provided
Diagnostic Interrupt : Provided
Power Interlock : Not Provided
FRU Info Device Address : 84h
SDR Device Address : 84h
SEL Device Address : 84h
Sys Mgmt Device Address : 0h
Bridge Device Address : 0h
address@hidden:~# ipmi-chassis -s --no-probing -D SSIF
--driver-address=0x42 --driver-device=/dev/i2c-0 --register-spacing=1
--debug
================================================================
[ VALUE TAG NAME:LENGTH ]
================================================================
[ 1h] = cmd[ 8b]
================================================================
================================================================
[ VALUE TAG NAME:LENGTH ]
================================================================
[ 1h] = cmd[ 8b]
[ 0h] = comp_code[ 8b]
[ 1h] = current_power_state.power_is_on[ 1b]
[ 0h] = current_power_state.power_overload[ 1b]
[ 0h] = current_power_state.interlock[ 1b]
[ 0h] = current_power_state.power_fault[ 1b]
[ 1h] = current_power_state.power_control_fault[ 1b]
[ 2h] = current_power_state.power_restore_policy[ 2b]
[ 0h] = current_power_state.reserved[ 1b]
[ 0h] = last_power_event.ac_failed[ 1b]
[ 0h] = last_power_event.power_down_caused_by_power_overload[ 1b]
[ 0h] =
last_power_event.power_down_caused_by_power_interlock_being_activated[
1b]
[ 1h] = last_power_event.power_down_caused_by_power_fault[ 1b]
[ 0h] = last_power_event.power_on_entered_via_ipmi[ 1b]
[ 0h] = last_power_event.reserved[ 3b]
[ 0h] = misc_chassis_state.chassis_intrusion_active[ 1b]
[ 0h] = misc_chassis_state.front_panel_lockout_active[ 1b]
[ 0h] = misc_chassis_state.drive_fault[ 1b]
[ 0h] = misc_chassis_state.cooling_fan_fault_detected[ 1b]
[ 0h] = misc_chassis_state.chassis_identify_state[ 2b]
[ 0h] =
misc_chassis_state.chassis_identify_command_and_state_info_supported[
1b]
[ 0h] = misc_chassis_state.reserved[ 1b]
================================================================
System Power : on
System Power Overload : false
Interlock switch : Inactive
Power fault detected : false
Power control fault : true
Power restore policy : Always on
Last Power Event : power down due to power fault
Misc Chassis status :
Front panel capabilities :
address@hidden:~#
Chris
- Re: [Freeipmi-users] problem with freeipmi 0.5.3 and intel SE7221BK1-E, (continued)
- Re: [Freeipmi-users] problem with freeipmi 0.5.3 and intel SE7221BK1-E, Al Chu, 2008/01/22
- Re: [Freeipmi-users] problem with freeipmi 0.5.3 and intel SE7221BK1-E, Chris Morgan, 2008/01/22
- Re: [Freeipmi-users] problem with freeipmi 0.5.3 and intel SE7221BK1-E, Chris Morgan, 2008/01/22
- Re: [Freeipmi-users] problem with freeipmi 0.5.3 and intel SE7221BK1-E, Al Chu, 2008/01/22
- Re: [Freeipmi-users] problem with freeipmi 0.5.3 and intel SE7221BK1-E, Chris Morgan, 2008/01/22
- Re: [Freeipmi-users] problem with freeipmi 0.5.3 and intel SE7221BK1-E, Al Chu, 2008/01/22
- Re: [Freeipmi-users] problem with freeipmi 0.5.3 and intel SE7221BK1-E, Chris Morgan, 2008/01/22
- Re: [Freeipmi-users] problem with freeipmi 0.5.3 and intel SE7221BK1-E, Al Chu, 2008/01/22
- Re: [Freeipmi-users] problem with freeipmi 0.5.3 and intel SE7221BK1-E, Chris Morgan, 2008/01/22
- Re: [Freeipmi-users] problem with freeipmi 0.5.3 and intel SE7221BK1-E, Al Chu, 2008/01/22
- Re: [Freeipmi-users] problem with freeipmi 0.5.3 and intel SE7221BK1-E,
Chris Morgan <=
- Re: [Freeipmi-users] problem with freeipmi 0.5.3 and intel SE7221BK1-E, Al Chu, 2008/01/23
- Re: [Freeipmi-users] problem with freeipmi 0.5.3 and intel SE7221BK1-E, Chris Morgan, 2008/01/23
- Re: [Freeipmi-users] problem with freeipmi 0.5.3 and intel SE7221BK1-E, Al Chu, 2008/01/23
- Re: [Freeipmi-users] problem with freeipmi 0.5.3 and intel SE7221BK1-E, Chris Morgan, 2008/01/23
- Re: [Freeipmi-users] problem with freeipmi 0.5.3 and intel SE7221BK1-E, Al Chu, 2008/01/23
- Re: [Freeipmi-users] problem with freeipmi 0.5.3 and intel SE7221BK1-E, Chris Morgan, 2008/01/23
- Re: [Freeipmi-users] problem with freeipmi 0.5.3 and intel SE7221BK1-E, Al Chu, 2008/01/23
- Re: [Freeipmi-users] problem with freeipmi 0.5.3 and intel SE7221BK1-E, Al Chu, 2008/01/23
- Re: [Freeipmi-users] problem with freeipmi 0.5.3 and intel SE7221BK1-E, Al Chu, 2008/01/24
- Re: [Freeipmi-users] problem with freeipmi 0.5.3 and intel SE7221BK1-E, Bala.A, 2008/01/21