[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Freeipmi-users] freeipmi to X4150/X4450
From: |
Al Chu |
Subject: |
Re: [Freeipmi-users] freeipmi to X4150/X4450 |
Date: |
Tue, 27 May 2008 10:23:51 -0700 |
On Tue, 2008-05-27 at 09:40 -0700, Al Chu wrote:
> Hey Ihara,
>
> I found a bug on the way that was unrelated to this, but actually the
> MAC addresses are already output correctly. But they only are output in
> verbose mode. It seems you always ran w/ verbose mode the last time we
> dealt with this :-)
>
> I'm going to go through the code and see if I should maybe make some
> changes in how verbosity is interpreted. When I originally wrote it, I
> think I only output "required fields" by default. Then extra stuff is
> output in verbose mode (the MAC address fields you're seeing are in the
> "oem defined extra" section of the fru format).
Ok, so I've modified the "meaning" of verbose now in ipmi-fru. Anything
that is defined in the spec will be output. "verbose" outputs extra
error messages, and "very verbose" adds in insane detailed information
(i.e. language code 0x03 used). B/c I don't want to change ipmi-fru's
behavior right now, I'll keep this change until I release 0.7.1.
Al
> Al
>
> On Tue, 2008-05-27 at 22:44 +0900, Shuichi Ihara wrote:
> > Al,
> >
> > >> I just tried the ipmitool to elom. An attached is output of ipmitool
> > >> with "fru".
> > >> As you mentioned, these information are from PSU, but it seems the ipmi
> > >> feature doesn't
> > >> work correctly and couldn't get information from these device.
> > >
> > > I'm thinking this is a problem on the firmware. I'll punt that issue
> > > off to you guys at Sun :-)
> >
> > picked up :) Thanks for your investigation.
> > I will try to ask internal right person about this issue.
> >
> > >
> > >> Also, I attached ipmi-fru output (without --debug), but I can't find MAC
> > >> address information
> > >> from this output.
> > >
> > > I guess a corner case in the parsing. Could you send me the --debug
> > > output?
> >
> > Please see attached file.
> >
> > Thanks,
> >
> > -Ihara
--
Albert Chu
address@hidden
925-422-5311
Computer Scientist
High Performance Systems Division
Lawrence Livermore National Laboratory
- Re: [Freeipmi-users] freeipmi to X4150/X4450, (continued)
- Re: [Freeipmi-users] freeipmi to X4150/X4450, Al Chu, 2008/05/24
- Re: [Freeipmi-users] freeipmi to X4150/X4450, Shuichi Ihara, 2008/05/26
- Re: [Freeipmi-users] freeipmi to X4150/X4450, Al Chu, 2008/05/26
- Re: [Freeipmi-users] freeipmi to X4150/X4450, Shuichi Ihara, 2008/05/27
- Re: [Freeipmi-users] freeipmi to X4150/X4450, Al Chu, 2008/05/27
- Re: [Freeipmi-users] freeipmi to X4150/X4450,
Al Chu <=