[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: [Freeipmi-users] Re: freeipmi
From: |
Al Chu |
Subject: |
RE: [Freeipmi-users] Re: freeipmi |
Date: |
Tue, 08 Dec 2009 12:54:05 -0800 |
Great. I will work on a better error message for output at the minimum.
Thanks,
Al
On Tue, 2009-12-08 at 11:42 -0800, Fox, Kevin M wrote:
> I had the same thought. Yes, it turns out that the rhel5 box that I
> built it on has libgcrypt 1.4.4 running on it since its registered to
> the RHN. The new box I was trying to run freeipmi on hasn't been
> registered with RHN yet so was running 1.2.6. Upgrading to 1.4.4 fixed
> the problem and its working now.
>
> Thanks,
> Kevin
> ________________________________________
> From: Al Chu address@hidden
> Sent: Tuesday, December 08, 2009 11:38 AM
> To: Fox, Kevin M
> Cc: address@hidden
> Subject: Re: [Freeipmi-users] Re: freeipmi
>
> Hey Kevin,
>
> I have an idea. Did you compile FreeIPMI against one version of
> libgcrypt, but are running on a machine w/ a different version of
> libgcrypt??
>
> I find it hard to believe that the difference between two versions could
> cause this problem, I think it's possible (given the way I'm reading how
> the call to 'gcry_check_version' works). I'll have to think about how I
> can return a better error message if this is what's happening.
>
> Al
>
> On Tue, 2009-12-08 at 11:13 -0800, Al Chu wrote:
> > Hey Kevin,
> >
> > The failures seem to be the libgcrypt. I'm not really sure what it
> > could be since it's just doing some library initialization. What
> > version are you running?
> >
> > Al
> >
> > On Tue, 2009-12-08 at 10:41 -0800, Fox, Kevin M wrote:
> > > I just tried:
> > > 0.7.15
> > > 0.7.16
> > >
> > > address@hidden kfox]# ipmiconsole -h a21-bmc -u XXX -p YYY --debug
> > > (ipmiconsole_engine.c, ipmiconsole_engine_setup, 200): ipmi_crypt_init:
> > > Bad file descriptor
> > > ipmiconsole_setup: Bad file descriptor
> > >
> > > address@hidden kfox]# ipmipower --help
> > > ipmipower: ipmi_rmcpplus_init
> > >
> > > Its not clear from a strace what the problem is.
> > >
> > > Any ideas?
> > >
> > > Thanks,
> > > Kevin
> --
> Albert Chu
> address@hidden
> Computer Scientist
> High Performance Systems Division
> Lawrence Livermore National Laboratory
>
--
Albert Chu
address@hidden
Computer Scientist
High Performance Systems Division
Lawrence Livermore National Laboratory