[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Freeipmi-users] ipmi support with HP iLO2 servers initial success!
From: |
john s. |
Subject: |
Re: [Freeipmi-users] ipmi support with HP iLO2 servers initial success! |
Date: |
Tue, 31 Jan 2012 02:06:59 -0800 (PST) |
Hello erverybody
Software:
ubuntu 10.04
freeipmi 1.0.9
Hardware:
ilo2 fw: 2.05 12/16/2010
I use freeipmi to check our ilo2 kvm over nagios
so far so good but , but in an intervall from 20 seconds there comes the
following error :
ipmi_ctx_open_outofband_2_0: bad rmcpplus status code
-> Execution of ipmimonitoring failed with return code 1.
-> ipmimonitoring was executed with the following parameters:
/usr/local/sbin/ipmimonitoring -h 192.xxx.xx.xxx --config-file
/usr/local/etc/freeipmi/freeipmi.conf -g Temperature --quiet-cache
--sdr-cache-recreate
does anybody know what this error message means??
best regards
john s.
--
View this message in context:
http://old.nabble.com/ipmi-support-with-HP-iLO2-servers-initial-success%21-tp29527071p33235060.html
Sent from the FreeIPMI - Users mailing list archive at Nabble.com.
- Re: [Freeipmi-users] ipmi support with HP iLO2 servers initial success!,
john s. <=