[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Freeipmi-users] Ipmi-oem : passowrd verification timeout while not
From: |
Albert Chu |
Subject: |
Re: [Freeipmi-users] Ipmi-oem : passowrd verification timeout while not interactive |
Date: |
Fri, 18 May 2012 10:45:53 -0700 |
On Fri, 2012-05-18 at 10:32 -0700, Albert Chu wrote:
> Hi Nicolas,
>
> I'm not sure why you would have this problem. It should be identical.
> Do all of the FreeIPMI tools on your system have this same behavior
> (ipmi-sensors, ipmi-fru, etc.) or is it only ipmi-oem?
>
> The 0.7.17.beta2 version is a maintenance branch in Debian that I
> presently don't maintain (the last FreeIPMI release in that series in
> 0.7.16, which I just tried and appears to work). I'm happy to look at
> the code, there may have been a simple backporting bug, but can't get
> access to their code repo right now.
Whoops, my bad. I did release a 0.7.17.beta2 tar.gz, but never released
0.7.17 (0.8.1 came out and I ended maintenance on that line).
I know that there was a piece of code in ipmi-oem that was fairly
unportable to newer systems and was fixed in FreeIPMI 1.0.8:
FreeIPMI 1.0.8 - 10/27/11
-------------------------
o Fix ipmi-raw and ipmi-oem allocation bug on newer systems, such as
RHEL6.
that could be your issue. Any chance you can update? If not I can work
w/ the debian maintainer on a backport patch.
Al
> In the meantime, perhaps you can try one of the newer versions of
> FreeIPMI (I released 1.1.5 yesterday). There also appears to be some
> newer debian versions too.
>
> Al
>
> On Fri, 2012-05-18 at 01:38 -0700, Nicolas T wrote:
> > Dear all,
> >
> > I've got troubles with ipmi-oem.
> > I would like to script it into a bash script so I have to make in "not
> > interactive".
> >
> > While in my bash I type the following interactive command :
> > ipmi-oem -h 10.10.7.93 -u myipmiuser -P -l User dell get-power-info
> >
> > And the password after the prompt, I can get the information below :
> > Cumulative Energy Start Time : 12/22/11 - 16:59:49
> > Cumulative Energy : 565.25 kWh
> > Peak Amp Time : 11/10/11 - 21:15:10
> > Peak Amp : 1.00 A
> > Peak Watt Time : 11/10/11 - 21:14:30
> > Peak Watt : 243 W
> >
> >
> > If I try to make in uninteractive, I always get a "ipmi-oem: password
> > verification timeout"
> > ipmi-oem -h 10.10.7.93 -u myipmiuser -p mypassword -l User dell
> > get-power-info
> > ipmi-oem -h 10.10.7.93 -u myipmiuser --password=mypassword -l User dell
> > get-power-info
> > ipmi-oem -h 10.10.7.93 -u myipmiuser -pmypassword -l User dell
> > get-power-info
> >
> > Is this normal? How should I solve it please.
> > I try to get info from a Dell IDRAC6. lanched on debian squeeze with
> > ipmi-oem - 0.7.17.beta2
> >
> > I've read it on the man page ""password verification timeout" -
> > Password verification has timed out. A "password invalid" error (described
> > above) or a generic
> > "session timeout" (described below) occurred. During this point in
> > the protocol it cannot be differentiated which occurred."
> > But can't get what i mean!!????!
> >
> >
> > Thank you,
> > JC
> > _______________________________________________
> > Freeipmi-users mailing list
> > address@hidden
> > https://lists.gnu.org/mailman/listinfo/freeipmi-users
--
Albert Chu
address@hidden
Computer Scientist
High Performance Systems Division
Lawrence Livermore National Laboratory