[Freeipmi-users] ipmi-sensors Super Micro X9SPU-F-O (Single)

[Holger Bürger]

Hallo,

as mentioned here:

http://www.thomas-krenn.com/de/wiki/FreeIPMI_kann_OEM_Sensor_nicht_auslesen_-_CPU_Temp_liefert_nur_N/A#Problem:_OEM_Sensor_wird_nicht_richtig_ausgelesen


I request a processing of the cpu temp sensors for the following mainboard:

Supermicro X9SPU-F-O (Single)

The output of the following commands follows:

ipmi-sensors -V
ipmi-sensors --flush-cache
ipmi-sensors --interpret-oem-data --output-sensor-state
ipmi-sensors --interpret-oem-data --output-sensor-state
--ignore-not-available-sensors
ipmi-sensors --interpret-oem-data --output-sensor-state -v
--record-ids=[IDs der betroffenen Records]

###################################################

/usr/local/sbin/ipmi-sensors -V
ipmi-sensors - 1.2.4
Copyright (C) 2003-2012 FreeIPMI Core Team
This program is free software; you may redistribute it under the terms of
the GNU General Public License.  This program has absolutely no warranty.


###################################################

/usr/local/sbin/bmc-info -h xxx.xxx.xxx.xxx -u xxx -p xxx -l admin

Device ID             : 32
Device Revision       : 1
Device SDRs           : unsupported
Firmware Revision     : 1.65
Device Available      : yes (normal operation)
IPMI Version          : 2.0
Sensor Device         : supported
SDR Repository Device : supported
SEL Device            : supported
FRU Inventory Device  : supported
IPMB Event Receiver   : supported
IPMB Event Generator  : supported
Bridge                : unsupported
Chassis Device        : supported
Manufacturer ID       : Super Micro Computer Inc. (10876)
Product ID            : 1603

GUID : 00000000-0000-0000-0000-000000000000

ipmi_cmd_get_system_info_parameters_system_firmware_version_first_set:
privilege level insufficient

###################################################


address@hidden ~]# ipmi-sensors --flush-cache
Flushing cache: /root/.freeipmi/sdr-cache/sdr-cache-xxxx.localhost

###################################################

address@hidden ~]# /usr/local/sbin/ipmi-sensors -h xxx.xxx.xxx.xxx -u xxx -p
xxx -l admin --interpret-oem-data --output-sensor-state
ID   | Name            | Type              | State    | Reading    |
Units | Event
4    | System Temp     | Temperature       | Nominal  | 17.00      | C
   | 'OK'
71   | Peripheral Temp | Temperature       | Nominal  | 26.00      | C
   | 'OK'
138  | CPU Temp        | OEM Reserved      | N/A      | N/A        | N/A
  | 'OEM Event = 0000h'
205  | FAN 1           | Fan               | Nominal  | 4725.00    | RPM
  | 'OK'
272  | FAN 2           | Fan               | Nominal  | 4725.00    | RPM
  | 'OK'
339  | FAN 3           | Fan               | Nominal  | 4725.00    | RPM
  | 'OK'
406  | FAN 4           | Fan               | Nominal  | 4425.00    | RPM
  | 'OK'
473  | FAN 5           | Fan               | Nominal  | 4950.00    | RPM
  | 'OK'
540  | Vcore           | Voltage           | Nominal  | 0.98       | V
   | 'OK'
607  | 3.3VCC          | Voltage           | Nominal  | 3.31       | V
   | 'OK'
674  | 12V             | Voltage           | Nominal  | 12.19      | V
   | 'OK'
741  | VDIMM           | Voltage           | Nominal  | 1.51       | V
   | 'OK'
808  | 5VCC            | Voltage           | Nominal  | 5.12       | V
   | 'OK'
875  | -12V            | Voltage           | Nominal  | -12.09     | V
   | 'OK'
942  | VBAT            | Voltage           | Nominal  | 3.14       | V
   | 'OK'
1009 | VSB             | Voltage           | Nominal  | 3.39       | V
   | 'OK'
1076 | AVCC            | Voltage           | Nominal  | 3.33       | V
   | 'OK'
1143 | Chassis Intru   | Physical Security | Nominal  | N/A        | N/A
  | 'OK'
1210 | PS Status       | Power Supply      | Nominal  | N/A        | N/A
  | 'Presence detected'
address@hidden ~]#


###################################################

 /usr/local/sbin/ipmi-sensors -h xxx.xxx.xxx.xxx -u xxx -p xxx -l admin
--interpret-oem-data --output-sensor-state --ignore-not-available-sensors
ID   | Name            | Type              | State    | Reading    |
Units | Event
4    | System Temp     | Temperature       | Nominal  | 17.00      | C
   | 'OK'
71   | Peripheral Temp | Temperature       | Nominal  | 26.00      | C
   | 'OK'
138  | CPU Temp        | OEM Reserved      | N/A      | N/A        | N/A
  | 'OEM Event = 0000h'
205  | FAN 1           | Fan               | Nominal  | 4800.00    | RPM
  | 'OK'
272  | FAN 2           | Fan               | Nominal  | 4725.00    | RPM
  | 'OK'
339  | FAN 3           | Fan               | Nominal  | 4800.00    | RPM
  | 'OK'
406  | FAN 4           | Fan               | Nominal  | 4425.00    | RPM
  | 'OK'
473  | FAN 5           | Fan               | Nominal  | 4800.00    | RPM
  | 'OK'
540  | Vcore           | Voltage           | Nominal  | 0.98       | V
   | 'OK'
607  | 3.3VCC          | Voltage           | Nominal  | 3.31       | V
   | 'OK'
674  | 12V             | Voltage           | Nominal  | 12.19      | V
   | 'OK'
741  | VDIMM           | Voltage           | Nominal  | 1.51       | V
   | 'OK'
808  | 5VCC            | Voltage           | Nominal  | 5.12       | V
   | 'OK'
875  | -12V            | Voltage           | Nominal  | -12.09     | V
   | 'OK'
942  | VBAT            | Voltage           | Nominal  | 3.14       | V
   | 'OK'
1009 | VSB             | Voltage           | Nominal  | 3.39       | V
   | 'OK'
1076 | AVCC            | Voltage           | Nominal  | 3.33       | V
   | 'OK'
1143 | Chassis Intru   | Physical Security | Nominal  | N/A        | N/A
  | 'OK'
1210 | PS Status       | Power Supply      | Nominal  | N/A        | N/A
  | 'Presence detected'
address@hidden ~]#


/usr/local/sbin/ipmi-sensors -h xxx.xxx.xxx.xxx -u xxx -p xxx -l admin
--interpret-oem-data --output-sensor-state -v --record-ids=138
Record ID: 138
ID String: CPU Temp
Sensor Type: OEM Reserved (C0h)
Sensor Number: 18
IPMB Slave Address: 10h
Sensor Owner ID: 20h
Sensor Owner LUN: 0h
Channel Number: 0h
Entity ID: processor (3)
Entity Instance: 1
Entity Instance Type: Physical Entity
Event/Reading Type Code: 70h
Sensor State: N/A
Sensor Event: 'OEM Event = 0000h'


kind regards

holger