[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [gforth] Using Gforth with #! "shebang"
From: |
Bernd Paysan |
Subject: |
Re: [gforth] Using Gforth with #! "shebang" |
Date: |
Thu, 22 Nov 2012 13:00:04 +0100 |
User-agent: |
KMail/4.8.5 (Linux/3.4.11-2.16-desktop; KDE/4.8.5; x86_64; ; ) |
Am Donnerstag, 22. November 2012, 05:10:41 schrieb David Kuehling:
> >>>>> "Bernd" == Bernd Paysan <address@hidden> writes:
> >> And the "#0 [IF]" works even for existing Gforth installations, so it
> >> seems at least as good.
> >
> > Probably not in gforth-0.6.0... but in general, I think all it needs
> > is documentation.
>
> This should work without needing non-standard literals:
> : ## ; 0 [IF]
>
> ...
> [THEN]
# is the Forth200x decimal number prefix, so it's standard. That's a good
thing, making this multi-line shebang (almost) fully standard Forth, so all a
Forth needs is the #! comment command.
--
Bernd Paysan
"If you want it done right, you have to do it yourself"
http://bernd-paysan.de/
signature.asc
Description: This is a digitally signed message part.
- [gforth] Using Gforth with #! "shebang", David Kuehling, 2012/11/20
- Re: [gforth] Using Gforth with #! "shebang", Andrew Pennebaker, 2012/11/20
- Re: [gforth] Using Gforth with #! "shebang", Anton Ertl, 2012/11/21
- Re: [gforth] Using Gforth with #! "shebang", David Kuehling, 2012/11/21
- Re: [gforth] Using Gforth with #! "shebang", Bernd Paysan, 2012/11/21
- Re: [gforth] Using Gforth with #! "shebang", Anton Ertl, 2012/11/21
- Re: [gforth] Using Gforth with #! "shebang", Bernd Paysan, 2012/11/21
- Re: [gforth] Using Gforth with #! "shebang", David Kuehling, 2012/11/21
- Re: [gforth] Using Gforth with #! "shebang",
Bernd Paysan <=
- Re: [gforth] Using Gforth with #! "shebang", Anton Ertl, 2012/11/22
- Re: [gforth] Using Gforth with #! "shebang", Bernd Paysan, 2012/11/22
Re: [gforth] Using Gforth with #! "shebang", Bernd Paysan, 2012/11/21