[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Gnash-commit] gnash ChangeLog configure.ac
From: |
Martin Guy |
Subject: |
[Gnash-commit] gnash ChangeLog configure.ac |
Date: |
Sun, 25 Mar 2007 11:55:59 +0000 |
CVSROOT: /sources/gnash
Module name: gnash
Changes by: Martin Guy <martinwguy> 07/03/25 11:55:59
Modified files:
. : ChangeLog configure.ac
Log message:
reformat all "package not installed" messages to the same layout
CVSWeb URLs:
http://cvs.savannah.gnu.org/viewcvs/gnash/ChangeLog?cvsroot=gnash&r1=1.2685&r2=1.2686
http://cvs.savannah.gnu.org/viewcvs/gnash/configure.ac?cvsroot=gnash&r1=1.274&r2=1.275
Patches:
Index: ChangeLog
===================================================================
RCS file: /sources/gnash/gnash/ChangeLog,v
retrieving revision 1.2685
retrieving revision 1.2686
diff -u -b -r1.2685 -r1.2686
--- ChangeLog 25 Mar 2007 09:05:58 -0000 1.2685
+++ ChangeLog 25 Mar 2007 11:55:58 -0000 1.2686
@@ -1,3 +1,8 @@
+2007-03-25 Martin Guy <address@hidden>
+
+ * configure.ac: reformat all "package not installed" messages
+ to the same layout
+
2007-03-25 Sandro Santilli <address@hidden>
* testsuite/actionscript.all/MovieClip.as: print a warning
Index: configure.ac
===================================================================
RCS file: /sources/gnash/gnash/configure.ac,v
retrieving revision 1.274
retrieving revision 1.275
diff -u -b -r1.274 -r1.275
--- configure.ac 20 Mar 2007 20:27:29 -0000 1.274
+++ configure.ac 25 Mar 2007 11:55:58 -0000 1.275
@@ -15,7 +15,7 @@
dnl Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
dnl
-dnl $Id: configure.ac,v 1.274 2007/03/20 20:27:29 martinwguy Exp $
+dnl $Id: configure.ac,v 1.275 2007/03/25 11:55:58 martinwguy Exp $
AC_PREREQ(2.50)
AC_INIT(gnash, cvs)
@@ -989,9 +989,9 @@
echo " XML flags are: $LIBXML_CFLAGS"
echo " XML libs are: $LIBXML_LIBS"
else
- echo " ERROR: No libxml2 development package installed!\
- To compile this project install libxml2-dev (using apt-get)\
- or libxml2-devel (using yum or rpm)."
+ echo " ERROR: No libxml2 development package installed!"
+ echo " To compile this project install libxml2-dev (using
apt-get)"
+ echo " or libxml2-devel (using yum or rpm)."
nogo=true
fi
fi
@@ -1017,7 +1017,8 @@
echo " Reconfigure with --disable-klash and/or"
echo " change to a different gui with --enable-gui=..."
echo " or install the KDE development environment, or"
- echo " install kdelibs-dev (using apt-get) or
something-else (using yum)."
+ echo " install kdelibs-dev (using apt-get) or"
+ echo " <something-else> (using yum)."
nogo=true
fi
fi
@@ -1036,7 +1037,8 @@
echo " Reconfigure with --disable-klash and/or"
echo " change to a different gui with --enable-gui=..."
echo " or install a QT development environment, or"
- echo " install libqt3-mt-dev (using apt-get) or
something-else (using yum)."
+ echo " install libqt3-mt-dev (using apt-get) or"
+ echo " <something-else> (using yum)."
fi
nogo=true
fi
@@ -1053,7 +1055,8 @@
else
echo " ERROR: No JPEG library development package installed!"
echo " You need to have the libjpeg package installed to compile, or"
- echo " install libjpeg-dev (using apt-get) or libjpeg-devel (using
yum)."
+ echo " install libjpeg-dev (using apt-get) or libjpeg-devel"
+ echo " (using yum)."
nogo=true
fi
@@ -1065,7 +1068,7 @@
dnl fi
dnl echo " Ogg libs are: $OGG_LIBS"
dnl else
-dnl echo "ERROR: No Ogg Vorbis development package installed!"
+dnl echo " ERROR: No Ogg Vorbis development package installed!"
dnl nogo=true
dnl fi
@@ -1077,7 +1080,7 @@
dnl fi
dnl echo " VORBIS libs are: $VORBIS_LIBS"
dnl else
-dnl echo "ERROR: No VORBIS Vorbis development package installed!"
+dnl echo " ERROR: No VORBIS Vorbis development package installed!"
dnl nogo=true
dnl fi
@@ -1090,10 +1093,10 @@
fi
echo " OpenGL libs are: $OPENGL_LIBS"
else
- echo "ERROR: No OpenGL development package installed!\
- You need to have the libmesa development package installed\
- to compile this project or install libgl1-mesa-dev\
- (using apt-get) or xorg-x11-Mesa-libGL (using yum)."
+ echo " ERROR: No OpenGL development package installed!"
+ echo " You need to have the libmesa development package
installed"
+ echo " to compile this project or install libgl1-mesa-dev"
+ echo " (using apt-get) or xorg-x11-Mesa-libGL (using yum)."
nogo=true
fi
fi
@@ -1110,11 +1113,11 @@
else
if test x"$gui" = x"gtk"; then
if test x"$renderer" = x"opengl"; then
- echo "ERROR: No GtkGLExt development package installed!\
- You need to have the GtkGLExt development package installed\
- to build the GTK gui / opengl renderer combination.\
- Try --enable-gui=sdl or --enable-renderer=cairo or install libgtkglext1-dev\
- (using apt-get) or gtkglext-devel (using yum)."
+ echo " ERROR: No GtkGLExt development package installed!"
+ echo " You need to have the GtkGLExt development package
installed"
+ echo " to build the GTK gui / opengl renderer
combination."
+ echo " Try --enable-gui=sdl or --enable-renderer=cairo
or install libgtkglext1-dev"
+ echo " (using apt-get) or gtkglext-devel (using yum)."
nogo=true
fi
fi
@@ -1131,10 +1134,10 @@
fi
echo " GTK2 libs are: $GTK2_LIBS"
else
- echo "ERROR: No GTK2 development package installed!\
- You need to have the GTK2 development package installed\
- to compile this project or install libgtk2.0-dev\
- (using apt-get) or gtk2-devel (using yum)."
+ echo " ERROR: No GTK2 development package installed!"
+ echo " You need to have the GTK2 development package
installed"
+ echo " to compile this project or install libgtk2.0-dev"
+ echo " (using apt-get) or gtk2-devel (using yum)."
dnl nogo=true
fi
@@ -1146,10 +1149,10 @@
fi
echo " Pango libs are: $PANGO_LIBS"
else
- echo "ERROR: No Pango development package installed!\
- You need to have the Pango development package installed\
- to compile this project or install libpango1.0-dev \
- (using apt-get) or pango-devel (using yum)."
+ echo " ERROR: No Pango development package installed!"
+ echo " You need to have the Pango development package
installed"
+ echo " to compile this project or install libpango1.0-dev"
+ echo " (using apt-get) or pango-devel (using yum)."
dnl nogo=true
fi
@@ -1161,10 +1164,10 @@
fi
echo " GLib libs are: $GLIB_LIBS"
else
- echo "ERROR: No GLib development package installed!\
- You need to have the GLib development package installed\
- to compile this project or install libglib2.0-dev\
- (using apt-get) or glib2-devel (using yum)."
+ echo " ERROR: No GLib development package installed!"
+ echo " You need to have the GLib development package
installed"
+ echo " to compile this project or install libglib2.0-dev"
+ echo " (using apt-get) or glib2-devel (using yum)."
dnl nogo=true
fi
@@ -1176,10 +1179,10 @@
fi
echo " ATK libs are: $ATK_LIBS"
else
- echo "ERROR: No ATK development package installed!\
- You need to have the ATK development package installed\
- to compile this project or install libatk1.0-dev\
- (using apt-get) or atk-devel (using yum)."
+ echo " ERROR: No ATK development package installed!"
+ echo " You need to have the ATK development package
installed"
+ echo " to compile this project or install libatk1.0-dev"
+ echo " (using apt-get) or atk-devel (using yum)."
dnl nogo=true
fi
@@ -1194,7 +1197,7 @@
fi
echo " Gstreamer libs are: $GSTREAMER_LIBS"
else
- echo "ERROR: gstreamer sound requested, but no gstreamer 0.10+ found"
+ echo " ERROR: gstreamer sound requested, but no gstreamer 0.10+
found"
nogo=true
fi
fi
@@ -1210,19 +1213,19 @@
fi
echo " MAD libs are: $MAD_LIBS"
else
- echo "ERROR: No libmad (mp3) development package installed!\
- You need to have the libmad development package installed\
- to enable mp3 decoding. You can either reconfigure using \
- --with-mp3-decoder=ffmpeg to use ffmpeg or install libmad0-dev\
- (using apt-get) or libmad (using yum)."
+ echo " ERROR: No libmad (mp3) development package installed!"
+ echo " You need to have the libmad development package
installed"
+ echo " to enable mp3 decoding. You can either reconfigure
using"
+ echo " --with-mp3-decoder=ffmpeg to use ffmpeg or install
libmad0-dev"
+ echo " (using apt-get) or libmad (using yum)."
nogo=true
fi
else
if test x"$mp3_decoder" = x"ffmpeg"; then
if test x${ffmpeg_version} != xok; then
- echo "ERROR: You have version ${ffmpeg_version} of ffmpeg installed. \
-This version of ffmpeg may not work! \
-Version 51.27.0 or newer is highly recommended"
+ echo " ERROR: You have version ${ffmpeg_version} of ffmpeg
installed."
+ echo " This version of ffmpeg may not work!"
+ echo " Version 51.27.0 or newer is highly recommended."
nogo=true
fi
if test x"$FFMPEG_LIBS" != x; then
@@ -1234,11 +1237,11 @@
fi
echo " ffmpeg libs are: $FFMPEG_LIBS"
else
- echo "ERROR: No ffmpeg development package installed!\
- You need to have the ffmpeg development package installed\
- to enable mp3 decoding. You can either reconfigure using \
- --with-mp3-decoder=mad to use libmad or install libavcodec-dev \
- and libdts-dev (using apt-get) or <package_names_here> (using yum).".
+ echo " ERROR: No ffmpeg development package installed!"
+ echo " You need to have the ffmpeg development package
installed"
+ echo " to enable mp3 decoding. You can either
reconfigure using"
+ echo " --with-mp3-decoder=mad to use libmad or install
libavcodec-dev"
+ echo " and libdts-dev (using apt-get) or
<package_names_here> (using yum).".
nogo=true
fi
fi
@@ -1254,12 +1257,12 @@
fi
echo " Cairo libs are: $CAIRO_LIBS"
else
- echo "WARNING: No Cairo development package installed!\
- You need to have the Cairo development package installed\
- if you have used --enable-render=cairo to configure\
- To compile this project, install libcairo-dev\
- (using apt-get) or cairo-devel (using yum).\
- Current Cairo is only being used by developers."
+ echo " ERROR: No Cairo development package installed!"
+ echo " You need to have the Cairo development package
installed"
+ echo " if you have used --enable-render=cairo to configure."
+ echo " To compile this project, install libcairo-dev"
+ echo " (using apt-get) or cairo-devel (using yum)."
+ echo " Currently Cairo is only being used by developers."
nogo=true
fi
fi
@@ -1267,15 +1270,15 @@
if test x$gui = xfltk; then
if test x"$FLTK2_LIBS" != x; then
if test x"$FLTK2_CFLAGS" != x; then
- echo " Fltk flags are: $FLTK2_CFLAGS"
+ echo " FLTK flags are: $FLTK2_CFLAGS"
else
- echo " Fltk flags are: default include path"
+ echo " FLTK flags are: default include path"
fi
- echo " Fltk libs are: $FLTK2_LIBS"
+ echo " FLTK libs are: $FLTK2_LIBS"
else
- echo "ERROR: No Fltk2 development package installed!\
- You need to have the fltk2 development package installed\
- to compile this project."
+ echo " ERROR: No FLTK2 development package installed!"
+ echo " There are currently no Debian or RPM packages for
FLTK2;"
+ echo " see http://www.fltk.org to install it from source."
dnl or install libfltk1.1-dev (using apt-get) or fltk-devel (using yum).
nogo=true
fi
@@ -1290,10 +1293,10 @@
fi
echo " Xft libs are: $XFT_LIBS"
dnl else
-dnl echo "ERROR: No Xft development package installed!\
-dnl You need to have the xft development package installed\
-dnl to compile this project or install libxft-dev \
-dnl (using apt-get) or xft-devel (using yum)."
+dnl echo " ERROR: No Xft development package installed!"
+dnl echo " You need to have the xft development package
installed"
+dnl echo " to compile this project or install libxft-dev "
+dnl echo " (using apt-get) or xft-devel (using yum)."
dnl nogo=true
fi
fi
@@ -1303,10 +1306,10 @@
echo " SDL flags are: $SDL_CFLAGS"
echo " SDL libs are: $SDL_LIBS"
else
- echo "ERROR: No SDL development package installed!\
- You need to have the SDL development package installed\
- to compile, or install libsdl1.2-dev (using apt-get)\
- or SDL-devel (using yum)."
+ echo " ERROR: No SDL development package installed!"
+ echo " You need to have the SDL development package
installed"
+ echo " to compile, or install libsdl1.2-dev (using apt-get)"
+ echo " or SDL-devel (using yum)."
nogo=true
fi
fi
@@ -1316,12 +1319,12 @@
echo " SDL flags are: $SDL_CFLAGS"
echo " SDL libs are: $SDL_LIBS"
else
- echo "ERROR: sdl sound requested, but no SDL development package
installed!\
- You need to have the SDL development package installed\
- if you wish to have sdl-based sound support for Gnash.\
- To compile this project with SDL sound support, install\
- libsdl-1.2-dev (using apt-get) or SDL-devel (using yum).
- In alternative build with --enable-sound=gst for gstreamer use"
+ echo " ERROR: sdl sound requested, but no SDL development package
installed!"
+ echo " You need to have the SDL development package
installed"
+ echo " if you wish to have sdl-based sound support for
Gnash."
+ echo " To compile this project with SDL sound support,
install"
+ echo " libsdl-1.2-dev (using apt-get) or SDL-devel (using
yum)."
+ echo " or configure with --enable-sound=gst to use gstreamer
instead."
nogo=true
fi
fi
@@ -1332,7 +1335,7 @@
dnl echo " Firefox libs are: $FIREFOX_LIBS"
echo " Plugin will be installed in ${FIREFOX_PLUGINS}"
dnl else
-dnl echo "ERROR: No Firefox or Mozilla development package installed!"
+dnl echo " ERROR: No Firefox or Mozilla development package
installed!"
# nogo=true
dnl fi
fi
@@ -1386,10 +1389,10 @@
echo " AGG libs are: $AGG_LIBS"
dnl echo " needs compatibility layer:
$agg_need_compatibility_layer"
else
- echo "ERROR: No AGG development package installed!\
- You need to have the AGG development package installed\
- to compile this project or install libagg-dev\
- (using apt-get) or agg-devel (using yum)."
+ echo " ERROR: No AGG development package installed!"
+ echo " You need to have the AGG development package
installed"
+ echo " to compile this project or install libagg-dev"
+ echo " (using apt-get) or agg-devel (using yum)."
dnl nogo=true
fi
else
@@ -1413,11 +1416,11 @@
nogo=true
fi
else
- echo "ERROR: No BOOST development package installed!\
- You need to have the BOOST development package installed\
- to compile, or install libboost-thread-dev and\
- libboost-date-time-dev (using apt-get) or boost-devel\
- (using yum)."
+ echo " ERROR: No BOOST development package installed!"
+ echo " You need to have the BOOST development package
installed"
+ echo " to compile, or install libboost-thread-dev and"
+ echo " libboost-date-time-dev (using apt-get) or boost-devel"
+ echo " (using yum)."
nogo=true
fi
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- [Gnash-commit] gnash ChangeLog configure.ac,
Martin Guy <=