Re: [Gnash-dev] Frame Buffer support not getting enabled.

[Markus Gothe]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA256

Prathap KV wrote:
> Hi,
>
> I configured gnash-0.8.0 for arm. This is my configure script:
> ./configure --host=arm-linux --build=i686-pc-linux-gnu
> --target=arm-linux --prefix=/usr/local/arm/oe
> build_alias=i686-pc-linux-gnu host_alias=arm-linux
> target_alias=arm-linux --enable-gui=FB --disable-plugin
> --disable-sound --enable-renderer=AGG --disable-klash
> --with-jpeg-lib=/usr/local/arm/oe/arm-linux/lib
> --with-jpeg-incl=/usr/local/arm/oe/arm-linux/include
> --with-z-incl=/usr/local/arm/oe/arm-linux/include
> --with-z-lib=/usr/local/arm/oe/arm-linux/lib
> --with-agg-lib=/usr/local/arm/oe/lib --without-x11
> --without-swfmill --with-top-level=/usr/local/arm/oe
> --with-boost-lib=/usr/local/arm/oe/lib --disable-cygnal
> --with-cairo=no
>
> Here i have given the option --enable-gui=FB. Configure runs
> without showin any error and when i did $make dumpconfig output:
>
> Image decoding support... JPEG_CFLAGS is
> -I/usr/local/arm/oe/arm-linux/include JPEG_LIBS is
> -L/usr/local/arm/oe/arm-linux/lib -ljpeg PNG_CFLAGS is PNG_LIBS is
> Audio decoding support... GUI Toolkit decoding support...
> SDL_CFLAGS is -I/usr/local/arm/oe/include/SDL SDL_LIBS is
> -L/usr/local/arm/oe/lib -lSDL X11_CFLAGS is
> -I/usr/local/arm/oe/arm-linux/include X11_LIBS is
> -L/usr/local/arm/oe/arm-linux/lib -lX11 -lXext -lSM -lICE Support
> libraries... INCLTDL -I./libltdl LIBLTDL ./libbase/libltdl.la
> GLIB_CFLAGS is GLIB_LIBS is Z_CFLAGS is
> -I/usr/local/arm/oe/arm-linux/include Z_LIBS is
> -L/usr/local/arm/oe/arm-linux/lib -lz LIBXML_CFLAGS is
> -I/usr/local/arm/oe/arm-linux/include/libxml2 LIBXML_LIBS is
> -L/usr/local/arm/oe/arm-linux/lib -lxml2 MAD_CFLAGS is
> -I/usr/local/arm/oe/include MAD_LIBS is -L/usr/local/arm/oe/lib
> -lmad PTHREAD_CFLAGS is -pthread PTHREAD_LIBS is
> -L/usr/local/arm/oe/arm-linux/lib -lpthread CURL_CFLAGS is
> -I/usr/local/arm/oe/include CURL_LIBS is -L/usr/local/arm/oe/lib
> -lcurl BOOST_CFLAGS is -I/usr/local/arm/oe/include BOOST_LIBS is
> -L/usr/local/arm/oe/lib -lboost_thread-gcc34-mt-d-1_34 SWFMILL
> /usr/local/bin/swfmill Graphics support... CAIRO_CFLAGS is
> CAIRO_LIBS is AGG_CFLAGS is -I/usr/local/arm/oe/include/agg2
> AGG_LIBS is -L/usr/local/arm/oe/lib -lagg A blank value for CFLAGS
> means the header is installed in the default system header
> location. All the LIBS should have a legit value
>
> Configurable options are: Media handler: mad Renderer engine: agg
> GUI: Extensions:
>
>
> Here GUI is shown blank and cross compiled gnash libraries has the
> support of x11.I am using a Frame Buffer device.
>
> What could be the reason? Wheather these libraries with x11 support
> will work on my target?
>
> Please help me.....
>
> Thanks & Regards, Prathap K V
>
>
> _______________________________________________ Gnash-dev mailing
> list address@hidden
> http://lists.gnu.org/mailman/listinfo/gnash-dev
This ones goes to /dev/null as I think most ppl figure it out quite
fast by themselves. You've kinda answered your own question.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.6 (GNU/Linux)

iD8DBQFGeOT36I0XmJx2NrwRCCn3AKCSi0rJieG2TksQe3gG8vT78WIMQQCfXhbW
zUBnPcGVMiThOAPjYzGpVlU=
=SZp+
-----END PGP SIGNATURE-----