[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Changes to gnats/doc/gnats.texi
From: |
Yngve Svendsen |
Subject: |
Changes to gnats/doc/gnats.texi |
Date: |
Sun, 27 Oct 2002 07:43:36 -0500 |
Index: gnats/doc/gnats.texi
diff -c gnats/doc/gnats.texi:1.37 gnats/doc/gnats.texi:1.38
*** gnats/doc/gnats.texi:1.37 Thu Oct 24 08:39:52 2002
--- gnats/doc/gnats.texi Sun Oct 27 07:43:36 2002
***************
*** 269,277 ****
may submit Problem Reports.
Responsibility for a given Problem Report initially depends on the
! category of the problem. Optionally, an automated reminder can be sent
! to the responsible person if a problem report is neglected for a
! requisite time period. @xref{GNATS configuration,,GNATS configuration}.
@cindex @code{pending} directory
@cindex unparseable incoming PRs
--- 269,278 ----
may submit Problem Reports.
Responsibility for a given Problem Report initially depends on the
! category of the problem. Optionally, an automated reminder can be
! sent to the responsible person if a problem report is neglected for a
! requisite time period. @xref{GNATS configuration,,Overview of
! @sc{gnats} configuration}.
@cindex @code{pending} directory
@cindex unparseable incoming PRs
***************
*** 398,404 ****
@c FIXME - check these
@table @asis
! @item database-specific configuration and database contents
@address@hidden/address@hidden
@item site-wide configuration files
--- 399,405 ----
@c FIXME - check these
@table @asis
! @item the directory path of the default database
@address@hidden/address@hidden
@item site-wide configuration files
***************
*** 611,637 ****
@table @file
@item databases
! The list of valid databases. For local databases it contains the
! pathname of the database directory, and for remote databases it has the
! hostname and port of the gnatsd server to connect to.
! (@pxref{databases file,,The @code{databases} file}).
@item defaults
! A directory containing the set of default files used when a new database
! is created with @code{mkdb}.
! (@pxref{dbconfig file,,The @code{dbconfig} file}).
@item gnatsd.host_access
! The access-level settings for the different hosts that will be accessing
! the databases on your server. The settings in this file apply across
! all databases on the server. @xref{gnatsd.host_access,,The
! @file{gnatsd.host_access} file}.
@item gnatsd.user_access
! The access-level settings for the users that will be accessing
! the databases on your server. The settings in this file apply across
! all databases on the server. @xref{gnatsd.user_access,,The
! @file{gnatsd.user_access} file}.
@end table
@item @var{prefix}/share/emacs/site-lisp
--- 612,627 ----
@table @file
@item databases
! @xref{databases file,,The @file{databases} file}.
@item defaults
! @xref{GNATS configuration,,Overview of @sc{gnats} configuration}.
@item gnatsd.host_access
! @xref{gnatsd.host_access,,The @file{gnatsd.host_access} file}.
@item gnatsd.user_access
! @xref{gnatsd.user_access,,The @file{gnatsd.user_access} file}.
@end table
@item @var{prefix}/share/emacs/site-lisp
***************
*** 697,703 ****
(@emph{This file is created by @sc{gnats}.})
@end table
! @noindent exist here. @xref{GNATS configuration,,GNATS configuration},
@ref{Admin files,,Administrative data files} and @ref{Access
Control,,Controlling access to databases}.
--- 687,694 ----
(@emph{This file is created by @sc{gnats}.})
@end table
! @noindent exist here.
! @xref{Other config files,,Other database-specific config files},
@ref{Admin files,,Administrative data files} and @ref{Access
Control,,Controlling access to databases}.
***************
*** 1535,1542 ****
@cindex @code{GNATSDB}
@code{gnatsd} supports the @code{GNATSDB} environment varable,
! @xref{Environment}, in almost the same way as the GNATS tools do. This
! variable is used to determine which database to use. For a local
database, it contains the name of the database to
access. @code{gnatsd} cannot service remote databases (though it might
be interesting if it could) so the database is always assumed to be
--- 1526,1533 ----
@cindex @code{GNATSDB}
@code{gnatsd} supports the @code{GNATSDB} environment varable,
! @xref{Environment}, in almost the same way as the @sc{gnats} tools do.
! This variable is used to determine which database to use. For a local
database, it contains the name of the database to
access. @code{gnatsd} cannot service remote databases (though it might
be interesting if it could) so the database is always assumed to be
***************
*** 1627,1637 ****
@section Overall access levels per host
@cindex @file{gnatsd.host_access}
! The file @address@hidden/gnats/gnatsd.host_access} (usually
! @file{/etc/gnats/gnatsd.host_access}) controls overall access levels
! on a per-host basis, meaning that settings in this file apply across
! all databases on the server. Entries in this file are on the
! following format:
@var{host:access-level:whatever}
--- 1618,1628 ----
@section Overall access levels per host
@cindex @file{gnatsd.host_access}
! The host access file (by default
! @file{/usr/local/etc/gnats/gnatsd.host_access}) controls overall
! access levels on a per-host basis, meaning that settings in this file
! apply across all databases on the server. Entries in this file are in
! the following format:
@var{host:access-level:whatever}
***************
*** 1661,1673 ****
@cindex @file{gnatsd.user_access}
Access levels per user can be set both across all databases on the
! server or on a per-database basis. The @file{gnatsd.user_access} file in a
! database's @file{gnats-adm} directory specifies the user access rules
! for that database. If it doesn't exist, or doesn't contain the user
! name given to @code{gnatsd}, then the file
! @address@hidden@var{SYSCONFDIR}/gnats/gnatsd.user_access}}, usually
! @address@hidden/etc/gnats/gnatsd.user_access}}, specifying the per-user
! access levels across all the databases on the server is checked.
The user access files can only @emph{increase} the access level
defined in the host access files for the given host, they can never
--- 1652,1664 ----
@cindex @file{gnatsd.user_access}
Access levels per user can be set both across all databases on the
! server or on a per-database basis. The @file{gnatsd.user_access} file
! in a database's @file{gnats-adm} directory specifies the user access
! rules for that database. If it doesn't exist, or doesn't contain the
! user name given to @code{gnatsd}, then the overall user access file
! (by default @address@hidden/usr/local/etc/gnats/gnatsd.user_access}})
! specifying the per-user access levels across all the databases on the
! server is checked.
The user access files can only @emph{increase} the access level
defined in the host access files for the given host, they can never
***************
*** 1690,1695 ****
--- 1681,1691 ----
@var{userid:password:access-level}
+ The overall @file{gnatsd.user_access} user access file adds a fourth
+ @var{databases} field:
+
+ @var{userid:password:access-level:databases}
+
@noindent @var{password} should either be in plain text, DES
@code{crypt()address@hidden crypt is the standard password encryption
format used by most UNIX systems} or MD5 hash address@hidden is
***************
*** 1760,1772 ****
might be surprised if they suddenly found themselves logged in, but with
a lower access level than they usually have.
! The overall user access file
! @address@hidden@var{SYSCONFDIR}/gnats/gnatsd.user_access}}, usually
! @address@hidden/etc/gnats/gnatsd.user_access}}, adds a fourth
! @var{database} field. This file contains a comma-separated list of
! database names, as defined in the @file{databases} file
! (@pxref{databases file,,The @code{databases} file}. Wildcard characters
! are supported. The databases listed in this field are the ones to which
the other settings on the same line will be applied.
@node Privileged gnatsd commands
--- 1756,1765 ----
might be surprised if they suddenly found themselves logged in, but with
a lower access level than they usually have.
! The @var{databases} field contains a comma-separated list of database
! names, as defined in the @file{databases} file (@pxref{databases
! file,,The @code{databases} file}. Wildcard characters are
! supported. The databases listed in this field are the ones to which
the other settings on the same line will be applied.
@node Privileged gnatsd commands
- Changes to gnats/doc/gnats.texi, (continued)
- Changes to gnats/doc/gnats.texi, Yngve Svendsen, 2002/10/14
- Changes to gnats/doc/gnats.texi, Yngve Svendsen, 2002/10/14
- Changes to gnats/doc/gnats.texi, Yngve Svendsen, 2002/10/14
- Changes to gnats/doc/gnats.texi, Yngve Svendsen, 2002/10/14
- Changes to gnats/doc/gnats.texi, Yngve Svendsen, 2002/10/15
- Changes to gnats/doc/gnats.texi, Yngve Svendsen, 2002/10/15
- Changes to gnats/doc/gnats.texi, Yngve Svendsen, 2002/10/20
- Changes to gnats/doc/gnats.texi, Yngve Svendsen, 2002/10/24
- Changes to gnats/doc/gnats.texi, Yngve Svendsen, 2002/10/24
- Changes to gnats/doc/gnats.texi, Yngve Svendsen, 2002/10/24
- Changes to gnats/doc/gnats.texi,
Yngve Svendsen <=
- Changes to gnats/doc/gnats.texi, Yngve Svendsen, 2002/10/28