[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Gnewsense-dev] lemote does not boot after install
From: |
samy boutayeb |
Subject: |
Re: [Gnewsense-dev] lemote does not boot after install |
Date: |
Sun, 24 Jan 2010 09:35:02 +0100 |
Hola Quiliro,
Le samedi 23 janvier 2010 à 20:19 -0500, Quiliro Ordóñez a écrit :
> On the gNewSense installation, I followed the steps in
> http://wiki.gnewsense.org/Projects/GNewSenseToMIPS. Everything went
> fine untill the installation finished and the computer rebooted. It
> was all normal but instead of seeing a kernel in /boot I get another
> file:
>
> PMON> devls
> Device name Type
> rtl0 IFNET
> wd0 DISK
> PMON> dir (wd0,0)/boot
> . <DIR>
> .. <DIR>
> delo.2nd <FILE> 67757
> PMON> load (wd0,0)/boot/vmlinux-2.6.31.6-libre1
> (wd0,0)/boot/vmlinux-2.6.31.6-libre1: Undefined error: 0
> PMON> load (wd0,0)/boot/vmlinux
> (wd0,0)/boot/vmlinux: Undefined error: 0
> PMON> load (wd0,0)/boot/delo.2nd
> Loading file: (wd0,0)/boot/delo.2nd (elf)
> 0x80440000/50776 + 0x8044c658/6856(z) + 131 syms-
> Entry address is 0x80443840
> PMON>
>
> And cannot boot. Obviously the kernel was not copied but the resto of
> the OS has been installed because when I type:
> dir (wd0,0)/
> I can see the whole directory tree and home has my username.
>
> Should I reinstall?
First, it's advisable to create an rescue USB stick, as described in
"Creation of a recovery system for the Yeeloong
laptop" ( http://wiki.gnewsense?org/Projects/Lemote#toc19 ).
Then examine your system.
Then, eventually try to download & install one linux-image located in
http://www.fsfla.org/download/linux-libre/lemote/gnewsense/pool/
Muy atentamente
Samy