|
From: | Derek Broughton |
Subject: | Re: 6160 and TDMA phones |
Date: | Wed, 05 Jun 2002 12:59:17 -0400 |
User-agent: | Mozilla/5.0 (X11; U; Linux i686; en-US; rv:0.9.9) Gecko/20020412 Debian/0.9.9-6 |
BORBELY Zoltan wrote:
Hi, I managed to commit the working m2bus driver to the cvs. You can try this, maybe the 5120/5160/6120/6160 phones can be used with the nk6100.c driver. The final solution isn't ready yet, but you can apply the attached patch to the cvs version. Don't forget to set the model to 6110 and compile it with debug. Any feedback welcome!
It's not good (this is with a TDMA 6160i): GNOKII Version 0.4.0pre20 Opened configuration file /home/derek/.gnokiirc Added new section global Adding key/value port//dev/ttyS0 Adding key/value model/6110 Adding key/value initlength/default Adding key/value connection/serial Adding key/value bindir//usr/sbin/ Serial device: opening device /dev/ttyS0 Serial device: setting speed to 9600 Serial device: setting RTS to high and DTR to low Identifying... Message sent: 0x64 / 0x0004 00 01 00 10 | Serial device: setting RTS to low and DTR to low Serial device: setting RTS to high and DTR to low SM_Block Retry - 0 Message sent: 0x64 / 0x0004 00 01 00 10 | Serial device: setting RTS to low and DTR to low Serial device: setting RTS to high and DTR to low SM_Block Retry - 1 Message sent: 0x64 / 0x0004 00 01 00 10 | Serial device: setting RTS to low and DTR to low Serial device: setting RTS to high and DTR to low SM_Block Retry - 2 Getting phone info... Message sent: 0xd1 / 0x0005 00 01 00 03 00 | Serial device: setting RTS to low and DTR to low Serial device: setting RTS to high and DTR to low SM_Block Retry - 0 Message sent: 0xd1 / 0x0005 00 01 00 03 00 | Serial device: setting RTS to low and DTR to low Serial device: setting RTS to high and DTR to low SM_Block Retry - 1 Message sent: 0xd1 / 0x0005 00 01 00 03 00 | Serial device: setting RTS to low and DTR to low Serial device: setting RTS to high and DTR to low SM_Block Retry - 2 Telephone interface init failed! Quitting. Serial device: closing device
[Prev in Thread] | Current Thread | [Next in Thread] |