Nokia 6130/6110: no response with --monitor

[Ekkard Gerlach]

Hello, 

Nokia 6130 or 6110, serial cable ttyS1, Kernel 2.4.20

address@hidden:~>gnokii --monitor
GNOKII Version 0.5.0rc4
Telephone interface init failed: Command timed out. Quitting.

.. when using   connection = serial


address@hidden:~>gnokii --monitor
GNOKII Version 0.5.0rc4
Telephone interface init failed: Function not supported by the phone Quitting.

.. when using   connection = dlr3p


the same with --identify. 

address@hidden:~>gnokii --version                
GNOKII Version 0.5.0rc4

address@hidden:~>grep -v "^#" .gnokiirc 
[global]
port = /dev/ttyS1
model = 6130
initlength = default
connection = dlr3p
bindir = /usr/local/sbin/
use_locking = yes
serial_baudrate = 19200
smsc_timeout = 10
[connect_script]
TELEPHONE = 12345678
[disconnect_script]


ls /dev/ttyS1 -l
crw-rw-rw-    1 root     gnokii     4,  65 2003-09-23 02:41 /dev/ttyS1

my digital camera works find on /dev/ttyS1 (no daemon that might 
lock the device!) , the device is okay. 


./configure
make 
make install
make install-doc
ldconfig 
... all worked fine.  

/etc/ld.so.conf   includes /usr/local/lib

The cable is labled with "data cable for Nokia 6210, 
6310  DLR-3original software" and is new and was
explicitly sold for my 6130 / 6110". The plug
is labled with "For 6210". The wrong cable?

I tested 2  6130 and 1  6110. Always the same error. 

Ideas?
thx
Ekkard