[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: gnokiid & Nokia 6610 & FBUS cable (PL2303) & GPRS
From: |
Petr Spodniak |
Subject: |
Re: gnokiid & Nokia 6610 & FBUS cable (PL2303) & GPRS |
Date: |
Tue, 06 Apr 2004 08:07:40 +0200 |
V po, 05. 04. 2004 v 18:50, Pawel Kot píše:
> >>> address@hidden 04/05/04 05:04pm >>>
> Try to connect to the phone with minicom and issue "AT". The phone
> should answer "OK". Try also to change serial port settings inside
> minicom.
I try it a lot... without any response.
> Does gnokii with model = "AT" work?
No (I was try all possible "serial_baudrate" 9600 - 115200).
# gnokii --monitor
GNOKII Version 0.6.0
phone instance config:
model: AT
port_device: /dev/ucom0
connection_type: 0
init_length: 0
serial_baudrate: 57600
serial_write_usleep: -1
hardware_handshake: 0
require_dcd: 0
smsc_timeout: 100
connect_script:
disconnect_script:
Initializing AT capable mobile phone ...
Serial device: opening device /dev/ucom0
Serial device: setting RTS to high and DTR to high
Message sent: 0x00 / 0x0004
41 54 5a 0d | ATZ
write: [ATZ<cr>]
Message sent: 0x00 / 0x0005
41 54 45 31 0d | ATE1
write: [ATE1<cr>]
Message sent: 0x06 / 0x0008
41 54 2b 43 47 4d 4d 0d | AT+CGMM
write: [AT+CGMM<cr>]
Initialization failed (11)
Telephone interface init failed: Command timed out.
Quitting.
--
Petr Spodniak <address@hidden>