RE: Running SMS to HTTP in Nokia 3650

[bagas]

Thank you for your reply, 

As stated you are using 486DX50 with 12M RAM and a Nokia 5110. What I
want to ask is, (how) can I the entire program (smsd and the script) in
the Nokia 3650 ?

Thank you,


-----Original Message-----
From: address@hidden
[mailto:address@hidden On Behalf
Of Stefan Schoeman
Sent: Tuesday, October 12, 2004 4:45 AM
To: Discussion forum for gnokii users.
Subject: Re: Running SMS to HTTP in Nokia 3650

I've been running Jan's smsd with this arrangement for a few years now.
Basically, my program reads a config file of URL's and for each received
SMS wget's each of the
URL's with the parameters time, sender and message at the end. Jan's
smsd calls the program
through the file module whenever it receives an SMS. This has runs
stably for a really long time
on a 486DX50 with 12M RAM and a Nokia 5110, although I had to write a
little script to keep an eye
on smsd and restart if it has unexpectedly exited. Despite this, I can
truly recommend using smsd
for this (thanks Jan).

Stefan Schoeman
South Africa

>> Dear All,
>>
>> I would like my Nokia 3650 accept SMS and send HTTP msg for the
>> corresponding SMS message. Can gnapplet do it? If it can, could
anyone
>> tell me how can I do it (in detail)?
>
> If you are able to write script for HTTP sending and 3650 is supported
by
> gnokii, you can use smsd with file module.
>
>                               jan
>
> --
>
>
> _______________________________________________
> gnokii-users mailing list
> address@hidden
> http://lists.nongnu.org/mailman/listinfo/gnokii-users
>



_______________________________________________
gnokii-users mailing list
address@hidden
http://lists.nongnu.org/mailman/listinfo/gnokii-users