Strange Problem with Serial connection with 6360 phone and gnokii version 0.6.4

[Yoav Daniely]

Greetings Gnokii users,
I am unable to use my nokia 6360 to send sms via gnokii with serial
interface.
When I try to do that everything looks normal but the SMS does not get go
through ( I even get a "sent successfully messsage)
I'm attaching output + debug data from gnokii , please help.

Regards,

      Yoav





#gnokii --sendsms 0546662086
GNOKII Version 0.6.4
LOG: debug mask is 0x1
LOG: rlpdebug mask is 0x1
LOG: xdebug mask is 0x1
phone instance config:
model: 6360
port_device: /dev/ttyS1
connection_type: 0
init_length: 0
serial_baudrate: 19200
serial_write_usleep: -1
hardware_handshake: 0
require_dcd: 0
smsc_timeout: 100
connect_script:
disconnect_script:
rfcomm_cn: 1
Connecting
Serial device: opening device /dev/ttyS1
Serial device: setting speed to 115200
Serial device: setting RTS to low and DTR to low
Getting model...
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
[Received Ack of type 1b, seq: 80]
[Sending Ack of type 1b, seq: 7]
Message received: 0x1b / 0x002e
01 32 00 08 00 01 58 29 00 21 56 30 33 2e 30 30 |  2    X) !V03.00
0a 30 31 2d 30 34 2d 30 33 0a 4e 50 57 2d 32 0a |  01-04-03 NPW-2
28 63 29 20 4e 4d 50 0a 0a 41 00 00 00 00       | (c) NMP  A
Received message type 1b
model length: 5
Received model NPW-2
Message sent: 0x02 / 0x0006
00 01 00 14 01 00                               |
[Received Ack of type 02, seq:  1]
[Sending Ack of type 02, seq: 0]
Message received: 0x02 / 0x000a
01 3b 00 f0 01 14 00 00 00 00                   |  ;
Received message type 02
Frame of type 0x02 (SMS handling) received!
Unknown subtype of type 0x02 (SMS handling): 0xf0
UNHANDLED FRAME RECEIVED
request: 0x02 / 0x0006
00 01 00 14 01 00                               |
reply: 0x02 / 0x000a
01 3b 00 f0 01 14 00 00 00 00                   |  ;
Please read Docs/Bugs and send a bug report!
Please enter SMS text. End your input with <cr><control-D>:fsdsfsdfsd
^XGeneral Data Coding
dcs: 0x8
Length: 0x18
user_data_length: 0x18
ValidityIndicator: 2
user_data: 0066007300640073006600730064006600730064000A0018
Sending
Sending SMS...(78)
Message sent: 0x02 / 0x004e
00 01 00 02 00 00 00 55 55 01 02 44 11 00 00 08 |        UU  D
00 04 82 0c 01 07 0a 81 50 64 66 02 68 00 82 0c |         Pdf h
02 01 00 00 00 00 00 00 00 00 80 20 18 18 00 66 |                f
00 73 00 64 00 73 00 66 00 73 00 64 00 66 00 73 |  s d s f s d f s
00 64 00 0a 00 18 55 55 55 55 08 04 01 a9       |  d    UUUU
[Received Ack of type 02, seq:  2]
[Sending Ack of type 02, seq: 1]
Message received: 0x02 / 0x000e
01 3b 00 03 00 01 48 08 00 02 00 00 00 00       |  ;    H
Received message type 02
Frame of type 0x02 (SMS handling) received!
SMS sent
Send succeeded!
Serial device: closing device


# gnokii --identify
GNOKII Version 0.6.4
LOG: debug mask is 0x1
LOG: rlpdebug mask is 0x1
LOG: xdebug mask is 0x1
phone instance config:
model: 6360
port_device: /dev/ttyS1
connection_type: 0
init_length: 0
serial_baudrate: 19200
serial_write_usleep: -1
hardware_handshake: 0
require_dcd: 0
smsc_timeout: 100
connect_script:
disconnect_script:
rfcomm_cn: 1
Connecting
Serial device: opening device /dev/ttyS1
Serial device: setting speed to 115200
Serial device: setting RTS to low and DTR to low
Getting model...
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
[Received Ack of type 1b, seq: 80]
[Sending Ack of type 1b, seq: 4]
Message received: 0x1b / 0x002e
01 32 00 08 00 01 58 29 00 21 56 30 33 2e 30 30 |  2    X) !V03.00
0a 30 31 2d 30 34 2d 30 33 0a 4e 50 57 2d 32 0a |  01-04-03 NPW-2
28 63 29 20 4e 4d 50 0a 0a 41 00 00 00 00       | (c) NMP  A
Received message type 1b
model length: 5
Received model NPW-2
Identifying...
Message sent: 0x1b / 0x0005
00 01 00 00 41                                  |     A
Message sent: 0x1b / 0x0006
00 01 00 07 01 00                               |
[Received Ack of type 1b, seq:  1]
[Received Ack of type 1b, seq:  2]
[Sending Ack of type 1b, seq: 5]
Message received: 0x1b / 0x0006
01 32 00 01 02 00                               |  2
Received message type 1b
Received imei /l!
[Sending Ack of type 1b, seq: 6]
Message received: 0x1b / 0x002e
01 32 00 08 00 01 58 29 00 21 56 30 33 2e 30 30 |  2    X) !V03.00
0a 30 31 2d 30 34 2d 30 33 0a 4e 50 57 2d 32 0a |  01-04-03 NPW-2
28 63 29 20 4e 4d 50 0a 0a 41 00 00 00 00       | (c) NMP  A
Received message type 1b
Received revision V03.00
model length: 5
Received model NPW-2
IMEI         : /l!
Manufacturer : Nokia
Model        : NPW-2
Revision     : V03.00
Serial device: closing device







##################gnokiirc configuration file###


#Gnokiirc
# This is a sample ~/.gnokiirc file.  Copy it into your
# home directory and name it .gnokiirc.
#

[global]

# Set port to the physical serial port used to connect to your phone.
# Linux version is:
port = /dev/ttyS1
# For MacOSX you will need something like:
# port = /dev/cu.USA28X1P1.1
#
# Use this setting also for the Bluetooth connection:
# port = aa:bb:cc:dd:ee:ff

# Set model to the model number of your phone
model = 6360

# Initlength controls the number of characters sent to the
# phone during initialisation.  You can either set it to
# the word "default" or a positive integer.
#
# You can try setting this value if you want to connect
# to the phone quicker.  If you've never noticed the
# connection to be slow, it is suggested that you
# leave this alone.  Read the initialisation code in fbus-xxxx
# to understand what this changes if you're curious.
initlength = default

# The type of the connection, for IR set this to infrared or irda.
# For the nk6110 driver only infrared is valid for the IrDA connection.
# See Docs/gnokii-ir-howto for more detailes on this.
# If you have 6210/6250/7110 phone and dau9p cable (the one you can
# use with 6100 series and cannot use hardware modem from the phone)
# you may want to use 'dau9p' value to get faster initialization.
# If you use dlr3 or dlr3p cable for nokia phones in FBUS mode (ie.
# you don't use model = AT) you may want to use 'dlr3p' value here.
# Note that it is recommended and currently the best way to use this
# cable with nk6510 driver.
connection = serial

# Set this to 'yes' if you want gnokii to set and check the lock file in
# /var/lock directory. It avoids potential conflicts with other serial
# port software (eg. minicom). If you have wrong permissions for the
# directory, a warning will be generated. If you don't want a lockfile, set
# it to 'no'.
use_locking = no

# Baudrate to use on serial port connections.
# Currently used only by models AT and BIP/CIMD. Defaults to 19200.
serial_baudrate = 19200

# Force waiting after each send character the specified usec time.
# Value -1 forces the fastest 'block' writing,
# value 0 writes each character separately without any explicite waiting,
# other positive values specify the appropriate 1/1000000 sec delaying.
# Siemens M20 requires at least "1"!  FIXME: Model-driven autodetection
#serial_write_usleep = 10000

# Force serial port handshaking mode, useful primarily for "AT" model.
# Gnokii "AT" model uses software handshake by default.
# Possible values: hardware (RTS/CTS - 7 wires) or software (XON/XOFF - 3
wires)
#handshake = software

# If defined (not commented out by '#') it will quit Gnokii anytime
# when DCD line will drop.
#require_dcd = 1

# If you are using a bluetooth connection, you can specify the rfcomm
# channel number here. Default value is 1.
#rfcomm_channel = 1

# Run the specified script(s) right after opening and initializing the
device
# and before any communucation (right before closing for disconnect_script).
# You may find handy to use it to connect your modem to SMS Center
# when using BIP or CIMD protocols
# Non-absolute path is relative to the specific directory where gnokii is
run!
#connect_script = /absolute/path/to/gnokii/Docs/sample/cimd-connect
#disconnect_script =

# When sending SMS you can experience timeouts. This is the feature of the
# overloaded SMSCs. The phones waits for the response from the SMSC
confirming
# that it received the short message. When the SMSC is DoSed with many
requests
# it will take more time to get the response. Adjust it to your needs. The
# value is given in seconds to wait. Defaults to 10 seconds. Set to 0 to
wait
# forever.
smsc_timeout = 10

# Set bindir to point to the location of the various gnokiid binaries.
# In particular ensure that mgnokiidev is in this location, with
# permissions 4750, owned by root, group gnokii.  Ensure you
# are in the gnokii group and that the group exists...
[gnokiid]
bindir = /usr/local/sbin/

# Any entries in the following two sections will be set as environment
# variables when running the scripts.
# Handy for use for $VAR substitutions in your chat(8) script.
[connect_script]
TELEPHONE = 12345678
[disconnect_script]


# The following parameters control how libgnokii handle the debugging
messages.
# Currently there are three categories: "debug" controls the libgnokii
# normal debug output, "rlpdebug" controls the debug output of the RLP
# subsystem, and "xdebug" is used by the xgnokii or smsd.

[logging]

# where to log the debug output (on: stderr)
debug = on

# where to log the rlp debug output (on: stderr)
rlpdebug = on

# where to log X debug output (on: stderr)
xdebug = on



-- 
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.300 / Virus Database: 266.5.0 - Release Date: 25/02/2005