[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Nokia 6230i with DKU-2 under Windows ?
From: |
Axel Kowald |
Subject: |
Re: Nokia 6230i with DKU-2 under Windows ? |
Date: |
23 Feb 2009 19:41:59 +0100 |
User-agent: |
Thunderbird 2.0.0.19 (Windows/20081209) |
Hello Jari,
However, any cable has drivers for Windows and they create a virtual
com-port which will work with Gnokii.
you mean I should be able to connect using a serial connection!?
Let me just describe what exactly I'm doing. Maybe it is something trivial.
1) I plug in the DKU-2 cable into my USB port under XP SP3.
2) The 6230i asks if I want to use it as external storage device. -> I
say no.
3) The windows new hardware wizard comes up -> I say cancel
4) In a DOS window I type in: gnokii --config gnokiirc --identify and
I get:
the following (com2: to com9: don't work at all).
Any idea what could be going wrong ?
Axel
GNOKII Version 0.6.27
LOG: debug mask is 0x1
Config read from file gnokiirc.
phone instance config:
model = 6230i
port = com1:
connection = serial
initlength = default
serial_baudrate = 19200
serial_write_usleep = -1
handshake = software
require_dcd = 0
smsc_timeout = 10
rfcomm_channel = 0
sm_retry = 0
Connecting
Serial device: opening device com1:
Serial device: setting speed to 115200
Serial device: setting RTS to low and DTR to low
Getting model...
Message sent: 0x1b / 0x0006
00 01 00 07 01 00 |
SM_Block: exiting the retry loop
Message sent: 0x1b / 0x0006
00 01 00 07 01 00 |
SM_Block: exiting the retry loop
Message sent: 0x1b / 0x0006
00 01 00 07 01 00 |
SM_Block: exiting the retry loop
Serial device: closing device
Serial device: opening device com1:
Serial device: setting speed to 115200
Serial device: setting RTS to low and DTR to high
Getting model...
Message sent: 0x1b / 0x0006
00 01 00 07 01 00 |
SM_Block: exiting the retry loop
Message sent: 0x1b / 0x0006
00 01 00 07 01 00 |
SM_Block: exiting the retry loop
Message sent: 0x1b / 0x0006
00 01 00 07 01 00 |
SM_Block: exiting the retry loop
Serial device: closing device
Serial device: opening device com1:
Serial device: setting RTS to low and DTR to low
Serial device: setting RTS to high and DTR to high
Serial device: setting speed to 19200
Switching to FBUS mode
Serial device: setting speed to 115200
Getting model...
Message sent: 0x1b / 0x0006
00 01 00 07 01 00 |
SM_Block: exiting the retry loop
Message sent: 0x1b / 0x0006
00 01 00 07 01 00 |
SM_Block: exiting the retry loop
Message sent: 0x1b / 0x0006
00 01 00 07 01 00 |
SM_Block: exiting the retry loop
Serial device: closing device
Telephone interface init failed: Command timed out.
Quitting.
Command timed out.