[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[GNUnet-SVN] r27032 - in libmicrohttpd/src: . testspdy
From: |
gnunet |
Subject: |
[GNUnet-SVN] r27032 - in libmicrohttpd/src: . testspdy |
Date: |
Sun, 5 May 2013 21:26:15 +0200 |
Author: grothoff
Date: 2013-05-05 21:26:15 +0200 (Sun, 05 May 2013)
New Revision: 27032
Added:
libmicrohttpd/src/testspdy/
libmicrohttpd/src/testspdy/Makefile.am
libmicrohttpd/src/testspdy/common.c
libmicrohttpd/src/testspdy/common.h
libmicrohttpd/src/testspdy/test_daemon_start_stop.c
libmicrohttpd/src/testspdy/test_daemon_start_stop_many.c
libmicrohttpd/src/testspdy/test_misc.c
libmicrohttpd/src/testspdy/test_new_connection.c
libmicrohttpd/src/testspdy/test_request_response.c
libmicrohttpd/src/testspdy/test_request_response_with_callback.c
libmicrohttpd/src/testspdy/test_requests_with_assets.c
libmicrohttpd/src/testspdy/test_session_timeout.c
libmicrohttpd/src/testspdy/test_struct_namevalue.c
Log:
add testcases
Added: libmicrohttpd/src/testspdy/Makefile.am
===================================================================
--- libmicrohttpd/src/testspdy/Makefile.am (rev 0)
+++ libmicrohttpd/src/testspdy/Makefile.am 2013-05-05 19:26:15 UTC (rev
27032)
@@ -0,0 +1,93 @@
+SUBDIRS = .
+
+AM_CFLAGS = -DDATADIR=\"$(top_srcdir)/src/datadir/\"
+
+if USE_COVERAGE
+ AM_CFLAGS += -fprofile-arcs -ftest-coverage
+endif
+
+if USE_PRIVATE_PLIBC_H
+ PLIBC_INCLUDE = -I$(top_srcdir)/src/include/plibc
+endif
+
+AM_CPPFLAGS = \
+ $(PLIBC_INCLUDE) \
+ -I$(top_srcdir) \
+ -I$(top_srcdir)/src/include \
+ -I$(top_srcdir)/src/applicationlayer \
+$(LIBCURL_CPPFLAGS)
+
+if !HAVE_W32
+PERF_GET_CONCURRENT=perf_get_concurrent
+endif
+
+check_PROGRAMS = \
+ test_daemon_start_stop \
+ test_daemon_start_stop_many \
+ test_struct_namevalue \
+ test_new_connection \
+ test_request_response \
+ test_request_response_with_callback \
+ test_requests_with_assets \
+ test_misc \
+ test_session_timeout
+
+TESTS = $(check_PROGRAMS)
+
+SPDY_SOURCES= \
+ common.h common.c
+
+SPDY_LDADD= \
+ $(top_builddir)/src/microspdy/libmicrospdy.la \
+ -lssl \
+ -lcrypto \
+ -lz \
+ -ldl
+
+test_daemon_start_stop_SOURCES = \
+ test_daemon_start_stop.c \
+ $(SPDY_SOURCES)
+test_daemon_start_stop_LDADD = $(SPDY_LDADD)
+
+test_daemon_start_stop_many_SOURCES = \
+ test_daemon_start_stop_many.c \
+ $(SPDY_SOURCES)
+test_daemon_start_stop_many_LDADD = $(SPDY_LDADD)
+
+test_struct_namevalue_SOURCES = \
+ test_struct_namevalue.c \
+ $(SPDY_SOURCES)
+test_struct_namevalue_LDADD = $(SPDY_LDADD)
+
+test_new_connection_SOURCES = \
+ test_new_connection.c \
+ $(SPDY_SOURCES)
+test_new_connection_LDADD = $(SPDY_LDADD) \
+ -lspdylay
+
+test_request_response_SOURCES = \
+ test_request_response.c \
+ $(SPDY_SOURCES)
+test_request_response_LDADD = $(SPDY_LDADD) \
+ -lspdylay
+
+test_request_response_with_callback_SOURCES = \
+ test_request_response_with_callback.c \
+ $(SPDY_SOURCES)
+test_request_response_with_callback_LDADD = $(SPDY_LDADD)
+
+test_requests_with_assets_SOURCES = \
+ test_requests_with_assets.c \
+ $(SPDY_SOURCES)
+test_requests_with_assets_LDADD = $(SPDY_LDADD)
+
+test_misc_SOURCES = \
+ test_misc.c \
+ $(SPDY_SOURCES)
+test_misc_LDADD = $(SPDY_LDADD)
+
+test_session_timeout_SOURCES = \
+ test_session_timeout.c \
+ $(SPDY_SOURCES)
+test_session_timeout_LDADD = $(SPDY_LDADD)
+
Added: libmicrohttpd/src/testspdy/common.c
===================================================================
--- libmicrohttpd/src/testspdy/common.c (rev 0)
+++ libmicrohttpd/src/testspdy/common.c 2013-05-05 19:26:15 UTC (rev 27032)
@@ -0,0 +1,61 @@
+/*
+ This file is part of libmicrospdy
+ Copyright (C) 2013 Andrey Uzunov
+
+ This program is free software: you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation, either version 3 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/**
+ * @file common.c
+ * @brief Common functions used by the tests.
+ * @author Andrey Uzunov
+ */
+
+
+#include "common.h"
+#include <sys/time.h>
+
+#ifdef __GNUC__
+#define ATTRIBUTE_CONSTRUCTOR __attribute__ ((constructor))
+#define ATTRIBUTE_DESTRUCTOR __attribute__ ((destructor))
+#else // !__GNUC__
+#define ATTRIBUTE_CONSTRUCTOR
+#define ATTRIBUTE_DESTRUCTOR
+#endif // __GNUC__
+
+void ATTRIBUTE_CONSTRUCTOR
+constructor()
+{
+ printf("\nTEST START
-------------------------------------------------------\n");
+}
+
+void ATTRIBUTE_DESTRUCTOR
+destructor()
+{
+ printf("------------------------------------------------------- TEST
END\n");
+}
+
+uint16_t
+get_port(uint16_t min)
+{
+ struct timeval tv;
+ gettimeofday(&tv, NULL);
+ if(2 > min) min=2;
+ uint16_t port = min + (tv.tv_usec+10) % ((1 << 16) - min);
+
+ //port = 12345;
+ printf("Port used: %i\n", port);
+
+ return port;
+}
Added: libmicrohttpd/src/testspdy/common.h
===================================================================
--- libmicrohttpd/src/testspdy/common.h (rev 0)
+++ libmicrohttpd/src/testspdy/common.h 2013-05-05 19:26:15 UTC (rev 27032)
@@ -0,0 +1,38 @@
+/*
+ This file is part of libmicrospdy
+ Copyright (C) 2013 Andrey Uzunov
+
+ This program is free software: you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation, either version 3 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/**
+ * @file common.h
+ * @brief Common functions used by the tests.
+ * @author Andrey Uzunov
+ */
+
+#include <stdlib.h>
+#include <unistd.h>
+#include <stdint.h>
+#include <stdio.h>
+
+#define FAIL_TEST(msg) do{\
+ printf("%i:%s\n", __LINE__, msg);\
+ fflush(stdout);\
+ exit(-10);\
+ }\
+ while(0)
+
+uint16_t
+get_port(uint16_t min);
Added: libmicrohttpd/src/testspdy/test_daemon_start_stop.c
===================================================================
--- libmicrohttpd/src/testspdy/test_daemon_start_stop.c
(rev 0)
+++ libmicrohttpd/src/testspdy/test_daemon_start_stop.c 2013-05-05 19:26:15 UTC
(rev 27032)
@@ -0,0 +1,49 @@
+/*
+ This file is part of libmicrospdy
+ Copyright (C) 2012 Andrey Uzunov
+
+ This program is free software: you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation, either version 3 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/**
+ * @file daemon_start_stop.c
+ * @brief starts and stops a SPDY daemon
+ * @author Andrey Uzunov
+ */
+
+#include "platform.h"
+#include "microspdy.h"
+#include "common.h"
+
+int
+main()
+{
+ SPDY_init();
+
+ struct SPDY_Daemon *daemon = SPDY_start_daemon(get_port(16123),
+ DATADIR "cert-and-key.pem",
+ DATADIR "cert-and-key.pem",
+ NULL,NULL,NULL,NULL,NULL,SPDY_DAEMON_OPTION_END);
+
+ if(NULL==daemon){
+ printf("no daemon\n");
+ return 1;
+ }
+
+ SPDY_stop_daemon(daemon);
+
+ SPDY_deinit();
+
+ return 0;
+}
Added: libmicrohttpd/src/testspdy/test_daemon_start_stop_many.c
===================================================================
--- libmicrohttpd/src/testspdy/test_daemon_start_stop_many.c
(rev 0)
+++ libmicrohttpd/src/testspdy/test_daemon_start_stop_many.c 2013-05-05
19:26:15 UTC (rev 27032)
@@ -0,0 +1,66 @@
+/*
+ This file is part of libmicrospdy
+ Copyright (C) 2012 Andrey Uzunov
+
+ This program is free software: you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation, either version 3 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/**
+ * @file daemon_start_stop_many.c
+ * @brief starts and stops several SPDY daemons, reusing port numbers
+ * @author Andrey Uzunov
+ */
+
+#include "platform.h"
+#include "microspdy.h"
+#include "common.h"
+
+int
+main()
+{
+ int i;
+ int j;
+ int num_daemons = 3;
+ int num_tries = 5;
+ int port = get_port(15123);
+ struct SPDY_Daemon *daemon[num_daemons];
+
+ SPDY_init();
+
+ for(i=0; i<num_tries; ++i)
+ {
+ for(j=0;j<num_daemons;++j)
+ {
+ daemon[j] = SPDY_start_daemon(port + j,
+ DATADIR "cert-and-key.pem",
+ DATADIR "cert-and-key.pem",
+ NULL,NULL,NULL,NULL,NULL,SPDY_DAEMON_OPTION_END);
+
+ if(NULL==daemon[j]){
+ printf("no daemon\n");
+ return 1;
+ }
+ }
+
+
+ for(j=0;j<num_daemons;++j)
+ {
+ SPDY_stop_daemon(daemon[j]);
+ }
+ }
+
+ SPDY_deinit();
+
+ return 0;
+}
Added: libmicrohttpd/src/testspdy/test_misc.c
===================================================================
--- libmicrohttpd/src/testspdy/test_misc.c (rev 0)
+++ libmicrohttpd/src/testspdy/test_misc.c 2013-05-05 19:26:15 UTC (rev
27032)
@@ -0,0 +1,273 @@
+/*
+ This file is part of libmicrospdy
+ Copyright (C) 2013 Andrey Uzunov
+
+ This program is free software: you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation, either version 3 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/**
+ * @file misc.c
+ * @brief tests a lot of small calls and callbacks. TODO mention what
+ * @author Andrey Uzunov
+ */
+
+#include "platform.h"
+#include "microspdy.h"
+#include "stdio.h"
+#include <sys/wait.h>
+#include "common.h"
+
+int port;
+
+#define HTML "<html><head>\
+<link href=\"main.css\" rel=\"stylesheet\" type=\"text/css\" />\
+</head><body>This is libmicrospdy</body></html>"
+
+#define CSS "body{font-size:15px}"
+
+#define SESSION_CLS "1234567890"
+
+#define REQUEST_CLS "1234567890REQ"
+
+pid_t parent;
+pid_t child;
+
+struct SPDY_Session *session1;
+struct SPDY_Session *session2;
+
+void
+killchild()
+{
+ kill(child, SIGKILL);
+ exit(1);
+}
+
+void
+killparent()
+{
+ kill(parent, SIGKILL);
+ _exit(1);
+}
+
+
+void
+create_child()
+{
+ parent = getpid();
+
+ child = fork();
+ if (-1 == child)
+ {
+ fprintf(stderr, "can't fork, error %d\n", errno);
+ exit(EXIT_FAILURE);
+ }
+
+ if (child == 0)
+ {
+ int devnull;
+ char *uri;
+ fflush(stdout);
+ devnull = open("/dev/null", O_WRONLY);
+ if (1 != devnull)
+ {
+ dup2(devnull, 1);
+ close(devnull);
+ }
+ asprintf(&uri,"https://127.0.0.1:%i/",port);
+ execlp("spdycat", "spdycat","-anv",uri,NULL );
+ printf("execlp failed\n");
+ killparent();
+ }
+}
+
+void
+response_done_callback(void *cls,
+ struct SPDY_Response *response,
+ struct SPDY_Request *request,
+ bool streamopened)
+{
+ if(strcmp(cls,"/main.css"))
+ {
+ session1 = SPDY_get_session_for_request(request);
+ if(NULL == session1)
+ {
+ printf("SPDY_get_session_for_request failed\n");
+ killchild();
+ }
+
+ char *session_cls = strdup(SESSION_CLS);
+ SPDY_set_cls_to_session(session1,session_cls);
+ }
+ else
+ {
+ session2 = SPDY_get_session_for_request(request);
+ if(session1 != session2)
+ {
+ printf("SPDY_get_session_for_request failed the second
time\n");
+ killchild();
+ }
+ printf("SPDY_get_session_for_request tested...\n");
+
+ void *session_cls = SPDY_get_cls_from_session(session2);
+ if(NULL == session_cls || strcmp(session_cls, SESSION_CLS))
+ {
+ printf("SPDY_get_cls_from_session failed\n");
+ killchild();
+ }
+ printf("SPDY_set_cls_to_session tested...\n");
+ printf("SPDY_get_cls_from_session tested...\n");
+
+ void *request_cls = SPDY_get_cls_from_request(request);
+ if(NULL == request_cls || strcmp(request_cls, REQUEST_CLS))
+ {
+ printf("SPDY_get_cls_from_request failed\n");
+ killchild();
+ }
+ printf("SPDY_set_cls_to_request tested...\n");
+ printf("SPDY_get_cls_from_request tested...\n");
+ }
+
+ SPDY_destroy_request(request);
+ SPDY_destroy_response(response);
+ free(cls);
+}
+
+void
+standard_request_handler(void *cls,
+ struct SPDY_Request * request,
+ uint8_t priority,
+ const char *method,
+ const char *path,
+ const char *version,
+ const char *host,
+ const char *scheme,
+ struct SPDY_NameValue * headers)
+{
+ struct SPDY_Response *response=NULL;
+ char *cls_path = strdup(path);
+
+ if(strcmp(path,"/main.css")==0)
+ {
+ char *request_cls = strdup(REQUEST_CLS);
+ SPDY_set_cls_to_request(request,request_cls);
+ response =
SPDY_build_response(200,NULL,SPDY_HTTP_VERSION_1_1,NULL,CSS,strlen(CSS));
+ }
+ else
+ {
+ response =
SPDY_build_response(200,NULL,SPDY_HTTP_VERSION_1_1,NULL,HTML,strlen(HTML));
+ }
+
+ if(NULL==response){
+ fprintf(stdout,"no response obj\n");
+ killchild();
+ }
+
+
if(SPDY_queue_response(request,response,true,false,&response_done_callback,cls_path)!=SPDY_YES)
+ {
+ fprintf(stdout,"queue\n");
+ killchild();
+ }
+}
+
+int
+parentproc()
+{
+ int childstatus;
+ unsigned long long timeoutlong=0;
+ struct timeval timeout;
+ int ret;
+ fd_set read_fd_set;
+ fd_set write_fd_set;
+ fd_set except_fd_set;
+ int maxfd = -1;
+ struct SPDY_Daemon *daemon;
+
+ SPDY_init();
+
+ daemon = SPDY_start_daemon(port,
+ DATADIR
"cert-and-key.pem",
+ DATADIR
"cert-and-key.pem",
+ NULL,
+ NULL,
+
&standard_request_handler,
+ NULL,
+ NULL,
+
SPDY_DAEMON_OPTION_SESSION_TIMEOUT,
+ 1800,
+
SPDY_DAEMON_OPTION_END);
+
+ if(NULL==daemon){
+ printf("no daemon\n");
+ return 1;
+ }
+
+ timeout.tv_usec = 0;
+ create_child();
+
+ do
+ {
+ FD_ZERO(&read_fd_set);
+ FD_ZERO(&write_fd_set);
+ FD_ZERO(&except_fd_set);
+
+ ret = SPDY_get_timeout(daemon, &timeoutlong);
+ if(SPDY_NO == ret || timeoutlong > 1)
+ {
+ timeout.tv_sec = 1;
+ }
+ else
+ {
+ timeout.tv_sec = timeoutlong;
+ }
+
+ maxfd = SPDY_get_fdset (daemon,
+ &read_fd_set,
+ &write_fd_set,
+ &except_fd_set);
+
+ ret = select(maxfd+1, &read_fd_set, &write_fd_set,
&except_fd_set, &timeout);
+
+ switch(ret) {
+ case -1:
+ printf("select error: %i\n", errno);
+ break;
+ case 0:
+
+ break;
+ default:
+ SPDY_run(daemon);
+
+ break;
+ }
+ }
+ while(waitpid(child,&childstatus,WNOHANG) != child);
+
+ SPDY_stop_daemon(daemon);
+
+ return WEXITSTATUS(childstatus);
+}
+
+
+int
+main(int argc, char **argv)
+{
+ port = get_port(13123);
+ SPDY_init();
+
+ int ret = parentproc();
+
+ SPDY_deinit();
+
+ return ret;
+}
Added: libmicrohttpd/src/testspdy/test_new_connection.c
===================================================================
--- libmicrohttpd/src/testspdy/test_new_connection.c
(rev 0)
+++ libmicrohttpd/src/testspdy/test_new_connection.c 2013-05-05 19:26:15 UTC
(rev 27032)
@@ -0,0 +1,981 @@
+/*
+ This file is part of libmicrospdy
+ Copyright (C) 2012 Andrey Uzunov
+
+ This program is free software: you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation, either version 3 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/**
+ * @file request_response.c
+ * @brief tests new connection callback. spdycli.c
+ * code is reused here
+ * @author Andrey Uzunov
+ * @author Tatsuhiro Tsujikawa
+ */
+
+ //TODO child exits with ret val 1 sometimes
+
+#include "platform.h"
+#include "microspdy.h"
+#include <sys/wait.h>
+#include "common.h"
+
+#define RESPONSE_BODY "<html><body><b>Hi, this is
libmicrospdy!</b></body></html>"
+
+#define CLS "anything"
+
+int port;
+int loop = 1;
+
+pid_t parent;
+pid_t child;
+
+int
+spdylay_printf(const char *format, ...)
+{
+ return 0;
+}
+
+int
+spdylay_fprintf(FILE *stream, const char *format, ...)
+{
+ return 0;
+}
+
+void
+killchild(int pid, char *message)
+{
+ printf("%s\n",message);
+ kill(pid, SIGKILL);
+ exit(1);
+}
+
+void
+killparent(int pid, char *message)
+{
+ printf("%s\n",message);
+ kill(pid, SIGKILL);
+ _exit(2);
+}
+
+
+/*****
+ * start of code needed to utilize spdylay
+ */
+
+#include <stdint.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <fcntl.h>
+#include <sys/types.h>
+#include <sys/socket.h>
+#include <netdb.h>
+#include <netinet/in.h>
+#include <netinet/tcp.h>
+#include <poll.h>
+#include <signal.h>
+#include <stdio.h>
+#include <assert.h>
+
+#include <spdylay/spdylay.h>
+
+#include <openssl/ssl.h>
+#include <openssl/err.h>
+
+enum {
+ IO_NONE,
+ WANT_READ,
+ WANT_WRITE
+};
+
+struct Connection {
+ SSL *ssl;
+ spdylay_session *session;
+ /* WANT_READ if SSL connection needs more input; or WANT_WRITE if it
+ needs more output; or IO_NONE. This is necessary because SSL/TLS
+ re-negotiation is possible at any time. Spdylay API offers
+ similar functions like spdylay_session_want_read() and
+ spdylay_session_want_write() but they do not take into account
+ SSL connection. */
+ int want_io;
+};
+
+struct Request {
+ char *host;
+ uint16_t port;
+ /* In this program, path contains query component as well. */
+ char *path;
+ /* This is the concatenation of host and port with ":" in
+ between. */
+ char *hostport;
+ /* Stream ID for this request. */
+ int32_t stream_id;
+ /* The gzip stream inflater for the compressed response. */
+ spdylay_gzip *inflater;
+};
+
+struct URI {
+ const char *host;
+ size_t hostlen;
+ uint16_t port;
+ /* In this program, path contains query component as well. */
+ const char *path;
+ size_t pathlen;
+ const char *hostport;
+ size_t hostportlen;
+};
+
+/*
+ * Returns copy of string |s| with the length |len|. The returned
+ * string is NULL-terminated.
+ */
+static char* strcopy(const char *s, size_t len)
+{
+ char *dst;
+ dst = malloc(len+1);
+ memcpy(dst, s, len);
+ dst[len] = '\0';
+ return dst;
+}
+
+/*
+ * Prints error message |msg| and exit.
+ */
+static void die(const char *msg)
+{
+ fprintf(stderr, "FATAL: %s\n", msg);
+ exit(EXIT_FAILURE);
+}
+
+/*
+ * Prints error containing the function name |func| and message |msg|
+ * and exit.
+ */
+static void dief(const char *func, const char *msg)
+{
+ fprintf(stderr, "FATAL: %s: %s\n", func, msg);
+ exit(EXIT_FAILURE);
+}
+
+/*
+ * Prints error containing the function name |func| and error code
+ * |error_code| and exit.
+ */
+static void diec(const char *func, int error_code)
+{
+ fprintf(stderr, "FATAL: %s: error_code=%d, msg=%s\n", func, error_code,
+ spdylay_strerror(error_code));
+ exit(EXIT_FAILURE);
+}
+
+/*
+ * Check response is content-encoding: gzip. We need this because SPDY
+ * client is required to support gzip.
+ */
+static void check_gzip(struct Request *req, char **nv)
+{
+ int gzip = 0;
+ size_t i;
+ for(i = 0; nv[i]; i += 2) {
+ if(strcmp("content-encoding", nv[i]) == 0) {
+ gzip = strcmp("gzip", nv[i+1]) == 0;
+ break;
+ }
+ }
+ if(gzip) {
+ int rv;
+ if(req->inflater) {
+ return;
+ }
+ rv = spdylay_gzip_inflate_new(&req->inflater);
+ if(rv != 0) {
+ die("Can't allocate inflate stream.");
+ }
+ }
+}
+
+/*
+ * The implementation of spdylay_send_callback type. Here we write
+ * |data| with size |length| to the network and return the number of
+ * bytes actually written. See the documentation of
+ * spdylay_send_callback for the details.
+ */
+static ssize_t send_callback(spdylay_session *session,
+ const uint8_t *data, size_t length, int flags,
+ void *user_data)
+{
+ struct Connection *connection;
+ ssize_t rv;
+ connection = (struct Connection*)user_data;
+ connection->want_io = IO_NONE;
+ ERR_clear_error();
+ rv = SSL_write(connection->ssl, data, length);
+ if(rv < 0) {
+ int err = SSL_get_error(connection->ssl, rv);
+ if(err == SSL_ERROR_WANT_WRITE || err == SSL_ERROR_WANT_READ) {
+ connection->want_io = (err == SSL_ERROR_WANT_READ ?
+ WANT_READ : WANT_WRITE);
+ rv = SPDYLAY_ERR_WOULDBLOCK;
+ } else {
+ rv = SPDYLAY_ERR_CALLBACK_FAILURE;
+ }
+ }
+ return rv;
+}
+
+/*
+ * The implementation of spdylay_recv_callback type. Here we read data
+ * from the network and write them in |buf|. The capacity of |buf| is
+ * |length| bytes. Returns the number of bytes stored in |buf|. See
+ * the documentation of spdylay_recv_callback for the details.
+ */
+static ssize_t recv_callback(spdylay_session *session,
+ uint8_t *buf, size_t length, int flags,
+ void *user_data)
+{
+ struct Connection *connection;
+ ssize_t rv;
+ connection = (struct Connection*)user_data;
+ connection->want_io = IO_NONE;
+ ERR_clear_error();
+ rv = SSL_read(connection->ssl, buf, length);
+ if(rv < 0) {
+ int err = SSL_get_error(connection->ssl, rv);
+ if(err == SSL_ERROR_WANT_WRITE || err == SSL_ERROR_WANT_READ) {
+ connection->want_io = (err == SSL_ERROR_WANT_READ ?
+ WANT_READ : WANT_WRITE);
+ rv = SPDYLAY_ERR_WOULDBLOCK;
+ } else {
+ rv = SPDYLAY_ERR_CALLBACK_FAILURE;
+ }
+ } else if(rv == 0) {
+ rv = SPDYLAY_ERR_EOF;
+ }
+ return rv;
+}
+
+/*
+ * The implementation of spdylay_before_ctrl_send_callback type. We
+ * use this function to get stream ID of the request. This is because
+ * stream ID is not known when we submit the request
+ * (spdylay_submit_request).
+ */
+static void before_ctrl_send_callback(spdylay_session *session,
+ spdylay_frame_type type,
+ spdylay_frame *frame,
+ void *user_data)
+{
+ if(type == SPDYLAY_SYN_STREAM) {
+ struct Request *req;
+ int stream_id = frame->syn_stream.stream_id;
+ req = spdylay_session_get_stream_user_data(session, stream_id);
+ if(req && req->stream_id == -1) {
+ req->stream_id = stream_id;
+ spdylay_printf("[INFO] Stream ID = %d\n", stream_id);
+ }
+ }
+}
+
+static void on_ctrl_send_callback(spdylay_session *session,
+ spdylay_frame_type type,
+ spdylay_frame *frame, void *user_data)
+{
+ char **nv;
+ const char *name = NULL;
+ int32_t stream_id;
+ size_t i;
+ switch(type) {
+ case SPDYLAY_SYN_STREAM:
+ nv = frame->syn_stream.nv;
+ name = "SYN_STREAM";
+ stream_id = frame->syn_stream.stream_id;
+ break;
+ default:
+ break;
+ }
+ if(name && spdylay_session_get_stream_user_data(session, stream_id)) {
+ spdylay_printf("[INFO] C ----------------------------> S (%s)\n", name);
+ for(i = 0; nv[i]; i += 2) {
+ spdylay_printf(" %s: %s\n", nv[i], nv[i+1]);
+ }
+ }
+}
+
+static void on_ctrl_recv_callback(spdylay_session *session,
+ spdylay_frame_type type,
+ spdylay_frame *frame, void *user_data)
+{
+ struct Request *req;
+ char **nv;
+ const char *name = NULL;
+ int32_t stream_id;
+ size_t i;
+ switch(type) {
+ case SPDYLAY_SYN_REPLY:
+ nv = frame->syn_reply.nv;
+ name = "SYN_REPLY";
+ stream_id = frame->syn_reply.stream_id;
+ break;
+ case SPDYLAY_HEADERS:
+ nv = frame->headers.nv;
+ name = "HEADERS";
+ stream_id = frame->headers.stream_id;
+ break;
+ default:
+ break;
+ }
+ if(!name) {
+ return;
+ }
+ req = spdylay_session_get_stream_user_data(session, stream_id);
+ if(req) {
+ check_gzip(req, nv);
+ spdylay_printf("[INFO] C <---------------------------- S (%s)\n", name);
+ for(i = 0; nv[i]; i += 2) {
+ spdylay_printf(" %s: %s\n", nv[i], nv[i+1]);
+ }
+ }
+}
+
+/*
+ * The implementation of spdylay_on_stream_close_callback type. We use
+ * this function to know the response is fully received. Since we just
+ * fetch 1 resource in this program, after reception of the response,
+ * we submit GOAWAY and close the session.
+ */
+static void on_stream_close_callback(spdylay_session *session,
+ int32_t stream_id,
+ spdylay_status_code status_code,
+ void *user_data)
+{
+ struct Request *req;
+ req = spdylay_session_get_stream_user_data(session, stream_id);
+ if(req) {
+ int rv;
+ rv = spdylay_submit_goaway(session, SPDYLAY_GOAWAY_OK);
+ if(rv != 0) {
+ diec("spdylay_submit_goaway", rv);
+ }
+ }
+}
+
+#define MAX_OUTLEN 4096
+
+/*
+ * The implementation of spdylay_on_data_chunk_recv_callback type. We
+ * use this function to print the received response body.
+ */
+static void on_data_chunk_recv_callback(spdylay_session *session, uint8_t
flags,
+ int32_t stream_id,
+ const uint8_t *data, size_t len,
+ void *user_data)
+{
+ struct Request *req;
+ req = spdylay_session_get_stream_user_data(session, stream_id);
+ if(req) {
+ spdylay_printf("[INFO] C <---------------------------- S (DATA)\n");
+ spdylay_printf(" %lu bytes\n", (unsigned long int)len);
+ if(req->inflater) {
+ while(len > 0) {
+ uint8_t out[MAX_OUTLEN];
+ size_t outlen = MAX_OUTLEN;
+ size_t tlen = len;
+ int rv;
+ rv = spdylay_gzip_inflate(req->inflater, out, &outlen, data, &tlen);
+ if(rv == -1) {
+ spdylay_submit_rst_stream(session, stream_id,
SPDYLAY_INTERNAL_ERROR);
+ break;
+ }
+ fwrite(out, 1, outlen, stdout);
+ data += tlen;
+ len -= tlen;
+ }
+ } else {
+ /* TODO add support gzip */
+ fwrite(data, 1, len, stdout);
+
+ //check if the data is correct
+ if(strcmp(RESPONSE_BODY, (char *)data) != 0)
+ killparent(parent, "\nreceived data is not the same");
+ }
+ spdylay_printf("\n");
+ }
+}
+
+/*
+ * Setup callback functions. Spdylay API offers many callback
+ * functions, but most of them are optional. The send_callback is
+ * always required. Since we use spdylay_session_recv(), the
+ * recv_callback is also required.
+ */
+static void setup_spdylay_callbacks(spdylay_session_callbacks *callbacks)
+{
+ memset(callbacks, 0, sizeof(spdylay_session_callbacks));
+ callbacks->send_callback = send_callback;
+ callbacks->recv_callback = recv_callback;
+ callbacks->before_ctrl_send_callback = before_ctrl_send_callback;
+ callbacks->on_ctrl_send_callback = on_ctrl_send_callback;
+ callbacks->on_ctrl_recv_callback = on_ctrl_recv_callback;
+ callbacks->on_stream_close_callback = on_stream_close_callback;
+ callbacks->on_data_chunk_recv_callback = on_data_chunk_recv_callback;
+}
+
+/*
+ * Callback function for SSL/TLS NPN. Since this program only supports
+ * SPDY protocol, if server does not offer SPDY protocol the Spdylay
+ * library supports, we terminate program.
+ */
+static int select_next_proto_cb(SSL* ssl,
+ unsigned char **out, unsigned char *outlen,
+ const unsigned char *in, unsigned int inlen,
+ void *arg)
+{
+ int rv;
+ uint16_t *spdy_proto_version;
+ /* spdylay_select_next_protocol() selects SPDY protocol version the
+ Spdylay library supports. */
+ rv = spdylay_select_next_protocol(out, outlen, in, inlen);
+ if(rv <= 0) {
+ die("Server did not advertise spdy/2 or spdy/3 protocol.");
+ }
+ spdy_proto_version = (uint16_t*)arg;
+ *spdy_proto_version = rv;
+ return SSL_TLSEXT_ERR_OK;
+}
+
+/*
+ * Setup SSL context. We pass |spdy_proto_version| to get negotiated
+ * SPDY protocol version in NPN callback.
+ */
+static void init_ssl_ctx(SSL_CTX *ssl_ctx, uint16_t *spdy_proto_version)
+{
+ /* Disable SSLv2 and enable all workarounds for buggy servers */
+ SSL_CTX_set_options(ssl_ctx, SSL_OP_ALL|SSL_OP_NO_SSLv2);
+ SSL_CTX_set_mode(ssl_ctx, SSL_MODE_AUTO_RETRY);
+ SSL_CTX_set_mode(ssl_ctx, SSL_MODE_RELEASE_BUFFERS);
+ /* Set NPN callback */
+ SSL_CTX_set_next_proto_select_cb(ssl_ctx, select_next_proto_cb,
+ spdy_proto_version);
+}
+
+static void ssl_handshake(SSL *ssl, int fd)
+{
+ int rv;
+ if(SSL_set_fd(ssl, fd) == 0) {
+ dief("SSL_set_fd", ERR_error_string(ERR_get_error(), NULL));
+ }
+ ERR_clear_error();
+ rv = SSL_connect(ssl);
+ if(rv <= 0) {
+ dief("SSL_connect", ERR_error_string(ERR_get_error(), NULL));
+ }
+}
+
+/*
+ * Connects to the host |host| and port |port|. This function returns
+ * the file descriptor of the client socket.
+ */
+static int connect_to(const char *host, uint16_t port)
+{
+ struct addrinfo hints;
+ int fd = -1;
+ int rv;
+ char service[NI_MAXSERV];
+ struct addrinfo *res, *rp;
+ snprintf(service, sizeof(service), "%u", port);
+ memset(&hints, 0, sizeof(struct addrinfo));
+ hints.ai_family = AF_UNSPEC;
+ hints.ai_socktype = SOCK_STREAM;
+ rv = getaddrinfo(host, service, &hints, &res);
+ if(rv != 0) {
+ dief("getaddrinfo", gai_strerror(rv));
+ }
+ for(rp = res; rp; rp = rp->ai_next) {
+ fd = socket(rp->ai_family, rp->ai_socktype, rp->ai_protocol);
+ if(fd == -1) {
+ continue;
+ }
+ while((rv = connect(fd, rp->ai_addr, rp->ai_addrlen)) == -1 &&
+ errno == EINTR);
+ if(rv == 0) {
+ break;
+ }
+ close(fd);
+ fd = -1;
+ }
+ freeaddrinfo(res);
+ return fd;
+}
+
+static void make_non_block(int fd)
+{
+ int flags, rv;
+ while((flags = fcntl(fd, F_GETFL, 0)) == -1 && errno == EINTR);
+ if(flags == -1) {
+ dief("fcntl", strerror(errno));
+ }
+ while((rv = fcntl(fd, F_SETFL, flags | O_NONBLOCK)) == -1 && errno == EINTR);
+ if(rv == -1) {
+ dief("fcntl", strerror(errno));
+ }
+}
+
+/*
+ * Setting TCP_NODELAY is not mandatory for the SPDY protocol.
+ */
+static void set_tcp_nodelay(int fd)
+{
+ int val = 1;
+ int rv;
+ rv = setsockopt(fd, IPPROTO_TCP, TCP_NODELAY, &val, (socklen_t)sizeof(val));
+ if(rv == -1) {
+ dief("setsockopt", strerror(errno));
+ }
+}
+
+/*
+ * Update |pollfd| based on the state of |connection|.
+ */
+static void ctl_poll(struct pollfd *pollfd, struct Connection *connection)
+{
+ pollfd->events = 0;
+ if(spdylay_session_want_read(connection->session) ||
+ connection->want_io == WANT_READ) {
+ pollfd->events |= POLLIN;
+ }
+ if(spdylay_session_want_write(connection->session) ||
+ connection->want_io == WANT_WRITE) {
+ pollfd->events |= POLLOUT;
+ }
+}
+
+/*
+ * Submits the request |req| to the connection |connection|. This
+ * function does not send packets; just append the request to the
+ * internal queue in |connection->session|.
+ */
+static void submit_request(struct Connection *connection, struct Request *req)
+{
+ int pri = 0;
+ int rv;
+ const char *nv[15];
+ /* We always use SPDY/3 style header even if the negotiated protocol
+ version is SPDY/2. The library translates the header name as
+ necessary. Make sure that the last item is NULL! */
+ nv[0] = ":method"; nv[1] = "GET";
+ nv[2] = ":path"; nv[3] = req->path;
+ nv[4] = ":version"; nv[5] = "HTTP/1.1";
+ nv[6] = ":scheme"; nv[7] = "https";
+ nv[8] = ":host"; nv[9] = req->hostport;
+ nv[10] = "accept"; nv[11] = "*/*";
+ nv[12] = "user-agent"; nv[13] = "spdylay/"SPDYLAY_VERSION;
+ nv[14] = NULL;
+ rv = spdylay_submit_request(connection->session, pri, nv, NULL, req);
+ if(rv != 0) {
+ diec("spdylay_submit_request", rv);
+ }
+}
+
+/*
+ * Performs the network I/O.
+ */
+static void exec_io(struct Connection *connection)
+{
+ int rv;
+ rv = spdylay_session_recv(connection->session);
+ if(rv != 0) {
+ diec("spdylay_session_recv", rv);
+ }
+ rv = spdylay_session_send(connection->session);
+ if(rv != 0) {
+ diec("spdylay_session_send", rv);
+ }
+}
+
+static void request_init(struct Request *req, const struct URI *uri)
+{
+ req->host = strcopy(uri->host, uri->hostlen);
+ req->port = uri->port;
+ req->path = strcopy(uri->path, uri->pathlen);
+ req->hostport = strcopy(uri->hostport, uri->hostportlen);
+ req->stream_id = -1;
+ req->inflater = NULL;
+}
+
+static void request_free(struct Request *req)
+{
+ free(req->host);
+ free(req->path);
+ free(req->hostport);
+ spdylay_gzip_inflate_del(req->inflater);
+}
+
+/*
+ * Fetches the resource denoted by |uri|.
+ */
+static void fetch_uri(const struct URI *uri)
+{
+ spdylay_session_callbacks callbacks;
+ int fd;
+ SSL_CTX *ssl_ctx;
+ SSL *ssl;
+ struct Request req;
+ struct Connection connection;
+ int rv;
+ nfds_t npollfds = 1;
+ struct pollfd pollfds[1];
+ uint16_t spdy_proto_version;
+
+ request_init(&req, uri);
+
+ setup_spdylay_callbacks(&callbacks);
+
+ /* Establish connection and setup SSL */
+ fd = connect_to(req.host, req.port);
+ ssl_ctx = SSL_CTX_new(SSLv23_client_method());
+ if(ssl_ctx == NULL) {
+ dief("SSL_CTX_new", ERR_error_string(ERR_get_error(), NULL));
+ }
+ init_ssl_ctx(ssl_ctx, &spdy_proto_version);
+ ssl = SSL_new(ssl_ctx);
+ if(ssl == NULL) {
+ dief("SSL_new", ERR_error_string(ERR_get_error(), NULL));
+ }
+ /* To simplify the program, we perform SSL/TLS handshake in blocking
+ I/O. */
+ ssl_handshake(ssl, fd);
+
+ connection.ssl = ssl;
+ connection.want_io = IO_NONE;
+
+ /* Here make file descriptor non-block */
+ make_non_block(fd);
+ set_tcp_nodelay(fd);
+
+ spdylay_printf("[INFO] SPDY protocol version = %d\n", spdy_proto_version);
+ rv = spdylay_session_client_new(&connection.session, spdy_proto_version,
+ &callbacks, &connection);
+ if(rv != 0) {
+ diec("spdylay_session_client_new", rv);
+ }
+
+ /* Submit the HTTP request to the outbound queue. */
+ submit_request(&connection, &req);
+
+ pollfds[0].fd = fd;
+ ctl_poll(pollfds, &connection);
+
+ /* Event loop */
+ while(spdylay_session_want_read(connection.session) ||
+ spdylay_session_want_write(connection.session)) {
+ int nfds = poll(pollfds, npollfds, -1);
+ if(nfds == -1) {
+ dief("poll", strerror(errno));
+ }
+ if(pollfds[0].revents & (POLLIN | POLLOUT)) {
+ exec_io(&connection);
+ }
+ if((pollfds[0].revents & POLLHUP) || (pollfds[0].revents & POLLERR)) {
+ die("Connection error");
+ }
+ ctl_poll(pollfds, &connection);
+ }
+
+ /* Resource cleanup */
+ spdylay_session_del(connection.session);
+ SSL_shutdown(ssl);
+ SSL_free(ssl);
+ SSL_CTX_free(ssl_ctx);
+ shutdown(fd, SHUT_WR);
+ close(fd);
+ request_free(&req);
+}
+
+static int parse_uri(struct URI *res, const char *uri)
+{
+ /* We only interested in https */
+ size_t len, i, offset;
+ memset(res, 0, sizeof(struct URI));
+ len = strlen(uri);
+ if(len < 9 || memcmp("https://", uri, 8) != 0) {
+ return -1;
+ }
+ offset = 8;
+ res->host = res->hostport = &uri[offset];
+ res->hostlen = 0;
+ if(uri[offset] == '[') {
+ /* IPv6 literal address */
+ ++offset;
+ ++res->host;
+ for(i = offset; i < len; ++i) {
+ if(uri[i] == ']') {
+ res->hostlen = i-offset;
+ offset = i+1;
+ break;
+ }
+ }
+ } else {
+ const char delims[] = ":/?#";
+ for(i = offset; i < len; ++i) {
+ if(strchr(delims, uri[i]) != NULL) {
+ break;
+ }
+ }
+ res->hostlen = i-offset;
+ offset = i;
+ }
+ if(res->hostlen == 0) {
+ return -1;
+ }
+ /* Assuming https */
+ res->port = 443;
+ if(offset < len) {
+ if(uri[offset] == ':') {
+ /* port */
+ const char delims[] = "/?#";
+ int port = 0;
+ ++offset;
+ for(i = offset; i < len; ++i) {
+ if(strchr(delims, uri[i]) != NULL) {
+ break;
+ }
+ if('0' <= uri[i] && uri[i] <= '9') {
+ port *= 10;
+ port += uri[i]-'0';
+ if(port > 65535) {
+ return -1;
+ }
+ } else {
+ return -1;
+ }
+ }
+ if(port == 0) {
+ return -1;
+ }
+ offset = i;
+ res->port = port;
+ }
+ }
+ res->hostportlen = uri+offset-res->host;
+ for(i = offset; i < len; ++i) {
+ if(uri[i] == '#') {
+ break;
+ }
+ }
+ if(i-offset == 0) {
+ res->path = "/";
+ res->pathlen = 1;
+ } else {
+ res->path = &uri[offset];
+ res->pathlen = i-offset;
+ }
+ return 0;
+}
+
+
+/*****
+ * end of code needed to utilize spdylay
+ */
+
+
+/*****
+ * start of code needed to utilize microspdy
+ */
+
+void
+new_session_callback (void *cls,
+ struct SPDY_Session * session)
+{
+ char ipstr[1024];
+
+ const struct sockaddr *addr;
+ socklen_t addr_len = SPDY_get_remote_addr(session, &addr);
+
+ if(!addr_len)
+ {
+ printf("SPDY_get_remote_addr");
+ abort();
+ }
+
+ if(strcmp(CLS,cls)!=0)
+ {
+ killchild(child,"wrong cls");
+ }
+
+ if(AF_INET == addr->sa_family)
+ {
+ struct sockaddr_in * addr4 = (struct sockaddr_in *) addr;
+ if(NULL == inet_ntop(AF_INET, &(addr4->sin_addr), ipstr,
sizeof(ipstr)))
+ {
+ killchild(child,"inet_ntop");
+ }
+ printf("New connection from: %s:%i\n", ipstr,
ntohs(addr4->sin_port));
+
+ loop = 0;
+ }
+#if HAVE_INET6
+ else if(AF_INET6 == addr->sa_family)
+ {
+ struct sockaddr_in6 * addr6 = (struct sockaddr_in6 *) addr;
+ if(NULL == inet_ntop(AF_INET6, &(addr6->sin6_addr), ipstr,
sizeof(ipstr)))
+ {
+ killchild(child,"inet_ntop");
+ }
+ printf("New connection from: %s:%i\n", ipstr,
ntohs(addr6->sin6_port));
+
+ loop = 0;
+ }
+#endif
+ else
+ {
+ killchild(child,"wrong family");
+ }
+}
+
+/*****
+ * end of code needed to utilize microspdy
+ */
+
+//child process
+void
+childproc(int parent)
+{
+ struct URI uri;
+ struct sigaction act;
+ int rv;
+ char *uristr;
+
+ memset(&act, 0, sizeof(struct sigaction));
+ act.sa_handler = SIG_IGN;
+ sigaction(SIGPIPE, &act, 0);
+
+ asprintf(&uristr, "https://127.0.0.1:%i/",port);
+
+ SSL_load_error_strings();
+ SSL_library_init();
+
+ rv = parse_uri(&uri, uristr);
+ if(rv != 0) {
+ killparent(parent,"parse_uri failed");
+ }
+ fetch_uri(&uri);
+}
+
+//parent proc
+int
+parentproc(int child)
+{
+ int childstatus = 0;
+ unsigned long long timeoutlong=0;
+ struct timeval timeout;
+ int ret;
+ fd_set read_fd_set;
+ fd_set write_fd_set;
+ fd_set except_fd_set;
+ int maxfd = -1;
+ struct SPDY_Daemon *daemon;
+
+ SPDY_init();
+
+ daemon = SPDY_start_daemon(port,
+ DATADIR
"cert-and-key.pem",
+ DATADIR
"cert-and-key.pem",
+
&new_session_callback,NULL,NULL,NULL,CLS,SPDY_DAEMON_OPTION_END);
+
+ if(NULL==daemon){
+ printf("no daemon\n");
+ return 1;
+ }
+
+ timeout.tv_usec = 0;
+
+ do
+ {
+ FD_ZERO(&read_fd_set);
+ FD_ZERO(&write_fd_set);
+ FD_ZERO(&except_fd_set);
+
+ ret = SPDY_get_timeout(daemon, &timeoutlong);
+ if(SPDY_NO == ret || timeoutlong > 1)
+ {
+ timeout.tv_sec = 1;
+ }
+ else
+ {
+ timeout.tv_sec = timeoutlong;
+ }
+
+ maxfd = SPDY_get_fdset (daemon,
+ &read_fd_set,
+ &write_fd_set,
+ &except_fd_set);
+
+ ret = select(maxfd+1, &read_fd_set, &write_fd_set,
&except_fd_set, &timeout);
+
+ switch(ret) {
+ case -1:
+ printf("select error: %i\n", errno);
+ killchild(child, "select error");
+ break;
+ case 0:
+
+ break;
+ default:
+ SPDY_run(daemon);
+
+ break;
+ }
+ }
+ while(loop && waitpid(child,&childstatus,WNOHANG) != child);
+
+ SPDY_stop_daemon(daemon);
+
+ SPDY_deinit();
+
+ if(loop)
+ return WEXITSTATUS(childstatus);
+ if(waitpid(child,&childstatus,WNOHANG) == child)
+ return WEXITSTATUS(childstatus);
+
+ kill(child,SIGKILL);
+
+ waitpid(child,&childstatus,0);
+
+ return 0;
+}
+
+int main(int argc, char **argv)
+{
+ port = get_port(14123);
+ parent = getpid();
+
+ child = fork();
+ if (child == -1)
+ {
+ fprintf(stderr, "can't fork, error %d\n", errno);
+ exit(EXIT_FAILURE);
+ }
+
+ if (child == 0)
+ {
+ childproc(parent);
+ _exit(0);
+ }
+ else
+ {
+ int ret = parentproc(child);
+ exit(ret);
+ }
+ return 1;
+}
Added: libmicrohttpd/src/testspdy/test_request_response.c
===================================================================
--- libmicrohttpd/src/testspdy/test_request_response.c
(rev 0)
+++ libmicrohttpd/src/testspdy/test_request_response.c 2013-05-05 19:26:15 UTC
(rev 27032)
@@ -0,0 +1,990 @@
+/*
+ This file is part of libmicrospdy
+ Copyright (C) 2012 Andrey Uzunov
+
+ This program is free software: you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation, either version 3 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/**
+ * @file request_response.c
+ * @brief tests receiving request and sending response. spdycli.c (spdylay)
+ * code is reused here
+ * @author Andrey Uzunov
+ * @author Tatsuhiro Tsujikawa
+ */
+
+#include "platform.h"
+#include "microspdy.h"
+#include <sys/wait.h>
+#include "common.h"
+
+#define RESPONSE_BODY "<html><body><b>Hi, this is
libmicrospdy!</b></body></html>"
+
+#define CLS "anything"
+
+pid_t parent;
+pid_t child;
+char *rcvbuf;
+int rcvbuf_c = 0;
+
+int session_closed_called = 0;
+
+void
+killchild(int pid, char *message)
+{
+ printf("%s\n",message);
+ kill(pid, SIGKILL);
+ exit(1);
+}
+
+void
+killparent(int pid, char *message)
+{
+ printf("%s\n",message);
+ kill(pid, SIGKILL);
+ _exit(1);
+}
+
+
+/*****
+ * start of code needed to utilize spdylay
+ */
+
+#include <stdint.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <fcntl.h>
+#include <sys/types.h>
+#include <sys/socket.h>
+#include <netdb.h>
+#include <netinet/in.h>
+#include <netinet/tcp.h>
+#include <poll.h>
+#include <signal.h>
+#include <stdio.h>
+#include <assert.h>
+
+#include <spdylay/spdylay.h>
+
+#include <openssl/ssl.h>
+#include <openssl/err.h>
+
+enum {
+ IO_NONE,
+ WANT_READ,
+ WANT_WRITE
+};
+
+struct Connection {
+ SSL *ssl;
+ spdylay_session *session;
+ /* WANT_READ if SSL connection needs more input; or WANT_WRITE if it
+ needs more output; or IO_NONE. This is necessary because SSL/TLS
+ re-negotiation is possible at any time. Spdylay API offers
+ similar functions like spdylay_session_want_read() and
+ spdylay_session_want_write() but they do not take into account
+ SSL connection. */
+ int want_io;
+};
+
+struct Request {
+ char *host;
+ uint16_t port;
+ /* In this program, path contains query component as well. */
+ char *path;
+ /* This is the concatenation of host and port with ":" in
+ between. */
+ char *hostport;
+ /* Stream ID for this request. */
+ int32_t stream_id;
+ /* The gzip stream inflater for the compressed response. */
+ spdylay_gzip *inflater;
+};
+
+struct URI {
+ const char *host;
+ size_t hostlen;
+ uint16_t port;
+ /* In this program, path contains query component as well. */
+ const char *path;
+ size_t pathlen;
+ const char *hostport;
+ size_t hostportlen;
+};
+
+/*
+ * Returns copy of string |s| with the length |len|. The returned
+ * string is NULL-terminated.
+ */
+static char* strcopy(const char *s, size_t len)
+{
+ char *dst;
+ dst = malloc(len+1);
+ memcpy(dst, s, len);
+ dst[len] = '\0';
+ return dst;
+}
+
+/*
+ * Prints error message |msg| and exit.
+ */
+static void die(const char *msg)
+{
+ fprintf(stderr, "FATAL: %s\n", msg);
+ exit(EXIT_FAILURE);
+}
+
+/*
+ * Prints error containing the function name |func| and message |msg|
+ * and exit.
+ */
+static void dief(const char *func, const char *msg)
+{
+ fprintf(stderr, "FATAL: %s: %s\n", func, msg);
+ exit(EXIT_FAILURE);
+}
+
+/*
+ * Prints error containing the function name |func| and error code
+ * |error_code| and exit.
+ */
+static void diec(const char *func, int error_code)
+{
+ fprintf(stderr, "FATAL: %s: error_code=%d, msg=%s\n", func, error_code,
+ spdylay_strerror(error_code));
+ exit(EXIT_FAILURE);
+}
+
+/*
+ * Check response is content-encoding: gzip. We need this because SPDY
+ * client is required to support gzip.
+ */
+static void check_gzip(struct Request *req, char **nv)
+{
+ int gzip = 0;
+ size_t i;
+ for(i = 0; nv[i]; i += 2) {
+ if(strcmp("content-encoding", nv[i]) == 0) {
+ gzip = strcmp("gzip", nv[i+1]) == 0;
+ break;
+ }
+ }
+ if(gzip) {
+ int rv;
+ if(req->inflater) {
+ return;
+ }
+ rv = spdylay_gzip_inflate_new(&req->inflater);
+ if(rv != 0) {
+ die("Can't allocate inflate stream.");
+ }
+ }
+}
+
+/*
+ * The implementation of spdylay_send_callback type. Here we write
+ * |data| with size |length| to the network and return the number of
+ * bytes actually written. See the documentation of
+ * spdylay_send_callback for the details.
+ */
+static ssize_t send_callback(spdylay_session *session,
+ const uint8_t *data, size_t length, int flags,
+ void *user_data)
+{
+ struct Connection *connection;
+ ssize_t rv;
+ connection = (struct Connection*)user_data;
+ connection->want_io = IO_NONE;
+ ERR_clear_error();
+ rv = SSL_write(connection->ssl, data, length);
+ if(rv < 0) {
+ int err = SSL_get_error(connection->ssl, rv);
+ if(err == SSL_ERROR_WANT_WRITE || err == SSL_ERROR_WANT_READ) {
+ connection->want_io = (err == SSL_ERROR_WANT_READ ?
+ WANT_READ : WANT_WRITE);
+ rv = SPDYLAY_ERR_WOULDBLOCK;
+ } else {
+ rv = SPDYLAY_ERR_CALLBACK_FAILURE;
+ }
+ }
+ return rv;
+}
+
+/*
+ * The implementation of spdylay_recv_callback type. Here we read data
+ * from the network and write them in |buf|. The capacity of |buf| is
+ * |length| bytes. Returns the number of bytes stored in |buf|. See
+ * the documentation of spdylay_recv_callback for the details.
+ */
+static ssize_t recv_callback(spdylay_session *session,
+ uint8_t *buf, size_t length, int flags,
+ void *user_data)
+{
+ struct Connection *connection;
+ ssize_t rv;
+ connection = (struct Connection*)user_data;
+ connection->want_io = IO_NONE;
+ ERR_clear_error();
+ rv = SSL_read(connection->ssl, buf, length);
+ if(rv < 0) {
+ int err = SSL_get_error(connection->ssl, rv);
+ if(err == SSL_ERROR_WANT_WRITE || err == SSL_ERROR_WANT_READ) {
+ connection->want_io = (err == SSL_ERROR_WANT_READ ?
+ WANT_READ : WANT_WRITE);
+ rv = SPDYLAY_ERR_WOULDBLOCK;
+ } else {
+ rv = SPDYLAY_ERR_CALLBACK_FAILURE;
+ }
+ } else if(rv == 0) {
+ rv = SPDYLAY_ERR_EOF;
+ }
+ return rv;
+}
+
+/*
+ * The implementation of spdylay_before_ctrl_send_callback type. We
+ * use this function to get stream ID of the request. This is because
+ * stream ID is not known when we submit the request
+ * (spdylay_submit_request).
+ */
+static void before_ctrl_send_callback(spdylay_session *session,
+ spdylay_frame_type type,
+ spdylay_frame *frame,
+ void *user_data)
+{
+ if(type == SPDYLAY_SYN_STREAM) {
+ struct Request *req;
+ int stream_id = frame->syn_stream.stream_id;
+ req = spdylay_session_get_stream_user_data(session, stream_id);
+ if(req && req->stream_id == -1) {
+ req->stream_id = stream_id;
+ printf("[INFO] Stream ID = %d\n", stream_id);
+ }
+ }
+}
+
+static void on_ctrl_send_callback(spdylay_session *session,
+ spdylay_frame_type type,
+ spdylay_frame *frame, void *user_data)
+{
+ char **nv;
+ const char *name = NULL;
+ int32_t stream_id;
+ size_t i;
+ switch(type) {
+ case SPDYLAY_SYN_STREAM:
+ nv = frame->syn_stream.nv;
+ name = "SYN_STREAM";
+ stream_id = frame->syn_stream.stream_id;
+ break;
+ default:
+ break;
+ }
+ if(name && spdylay_session_get_stream_user_data(session, stream_id)) {
+ printf("[INFO] C ----------------------------> S (%s)\n", name);
+ for(i = 0; nv[i]; i += 2) {
+ printf(" %s: %s\n", nv[i], nv[i+1]);
+ }
+ }
+}
+
+static void on_ctrl_recv_callback(spdylay_session *session,
+ spdylay_frame_type type,
+ spdylay_frame *frame, void *user_data)
+{
+ struct Request *req;
+ char **nv;
+ const char *name = NULL;
+ int32_t stream_id;
+ size_t i;
+ switch(type) {
+ case SPDYLAY_SYN_REPLY:
+ nv = frame->syn_reply.nv;
+ name = "SYN_REPLY";
+ stream_id = frame->syn_reply.stream_id;
+ break;
+ case SPDYLAY_HEADERS:
+ nv = frame->headers.nv;
+ name = "HEADERS";
+ stream_id = frame->headers.stream_id;
+ break;
+ default:
+ break;
+ }
+ if(!name) {
+ return;
+ }
+ req = spdylay_session_get_stream_user_data(session, stream_id);
+ if(req) {
+ check_gzip(req, nv);
+ printf("[INFO] C <---------------------------- S (%s)\n", name);
+ for(i = 0; nv[i]; i += 2) {
+ printf(" %s: %s\n", nv[i], nv[i+1]);
+ }
+ }
+}
+
+/*
+ * The implementation of spdylay_on_stream_close_callback type. We use
+ * this function to know the response is fully received. Since we just
+ * fetch 1 resource in this program, after reception of the response,
+ * we submit GOAWAY and close the session.
+ */
+static void on_stream_close_callback(spdylay_session *session,
+ int32_t stream_id,
+ spdylay_status_code status_code,
+ void *user_data)
+{
+ struct Request *req;
+ req = spdylay_session_get_stream_user_data(session, stream_id);
+ if(req) {
+ int rv;
+ rv = spdylay_submit_goaway(session, SPDYLAY_GOAWAY_OK);
+ if(rv != 0) {
+ diec("spdylay_submit_goaway", rv);
+ }
+ }
+}
+
+#define MAX_OUTLEN 4096
+
+/*
+ * The implementation of spdylay_on_data_chunk_recv_callback type. We
+ * use this function to print the received response body.
+ */
+static void on_data_chunk_recv_callback(spdylay_session *session, uint8_t
flags,
+ int32_t stream_id,
+ const uint8_t *data, size_t len,
+ void *user_data)
+{
+ struct Request *req;
+ req = spdylay_session_get_stream_user_data(session, stream_id);
+ if(req) {
+ printf("[INFO] C <---------------------------- S (DATA)\n");
+ printf(" %lu bytes\n", (unsigned long int)len);
+ if(req->inflater) {
+ while(len > 0) {
+ uint8_t out[MAX_OUTLEN];
+ size_t outlen = MAX_OUTLEN;
+ size_t tlen = len;
+ int rv;
+ rv = spdylay_gzip_inflate(req->inflater, out, &outlen, data, &tlen);
+ if(rv == -1) {
+ spdylay_submit_rst_stream(session, stream_id,
SPDYLAY_INTERNAL_ERROR);
+ break;
+ }
+ fwrite(out, 1, outlen, stdout);
+ data += tlen;
+ len -= tlen;
+ }
+ } else {
+ /* TODO add support gzip */
+ fwrite(data, 1, len, stdout);
+
+ //check if the data is correct
+ //if(strcmp(RESPONSE_BODY, data) != 0)
+ //killparent(parent, "\nreceived data is not the same");
+ if(len + rcvbuf_c > strlen(RESPONSE_BODY))
+ killparent(parent, "\nreceived data is not the same");
+
+ strcpy(rcvbuf + rcvbuf_c,(char*)data);
+ rcvbuf_c+=len;
+ }
+ printf("\n");
+ }
+}
+
+/*
+ * Setup callback functions. Spdylay API offers many callback
+ * functions, but most of them are optional. The send_callback is
+ * always required. Since we use spdylay_session_recv(), the
+ * recv_callback is also required.
+ */
+static void setup_spdylay_callbacks(spdylay_session_callbacks *callbacks)
+{
+ memset(callbacks, 0, sizeof(spdylay_session_callbacks));
+ callbacks->send_callback = send_callback;
+ callbacks->recv_callback = recv_callback;
+ callbacks->before_ctrl_send_callback = before_ctrl_send_callback;
+ callbacks->on_ctrl_send_callback = on_ctrl_send_callback;
+ callbacks->on_ctrl_recv_callback = on_ctrl_recv_callback;
+ callbacks->on_stream_close_callback = on_stream_close_callback;
+ callbacks->on_data_chunk_recv_callback = on_data_chunk_recv_callback;
+}
+
+/*
+ * Callback function for SSL/TLS NPN. Since this program only supports
+ * SPDY protocol, if server does not offer SPDY protocol the Spdylay
+ * library supports, we terminate program.
+ */
+static int select_next_proto_cb(SSL* ssl,
+ unsigned char **out, unsigned char *outlen,
+ const unsigned char *in, unsigned int inlen,
+ void *arg)
+{
+ int rv;
+ uint16_t *spdy_proto_version;
+ /* spdylay_select_next_protocol() selects SPDY protocol version the
+ Spdylay library supports. */
+ rv = spdylay_select_next_protocol(out, outlen, in, inlen);
+ if(rv <= 0) {
+ die("Server did not advertise spdy/2 or spdy/3 protocol.");
+ }
+ spdy_proto_version = (uint16_t*)arg;
+ *spdy_proto_version = rv;
+ return SSL_TLSEXT_ERR_OK;
+}
+
+/*
+ * Setup SSL context. We pass |spdy_proto_version| to get negotiated
+ * SPDY protocol version in NPN callback.
+ */
+static void init_ssl_ctx(SSL_CTX *ssl_ctx, uint16_t *spdy_proto_version)
+{
+ /* Disable SSLv2 and enable all workarounds for buggy servers */
+ SSL_CTX_set_options(ssl_ctx, SSL_OP_ALL|SSL_OP_NO_SSLv2);
+ SSL_CTX_set_mode(ssl_ctx, SSL_MODE_AUTO_RETRY);
+ SSL_CTX_set_mode(ssl_ctx, SSL_MODE_RELEASE_BUFFERS);
+ /* Set NPN callback */
+ SSL_CTX_set_next_proto_select_cb(ssl_ctx, select_next_proto_cb,
+ spdy_proto_version);
+}
+
+static void ssl_handshake(SSL *ssl, int fd)
+{
+ int rv;
+ if(SSL_set_fd(ssl, fd) == 0) {
+ dief("SSL_set_fd", ERR_error_string(ERR_get_error(), NULL));
+ }
+ ERR_clear_error();
+ rv = SSL_connect(ssl);
+ if(rv <= 0) {
+ dief("SSL_connect", ERR_error_string(ERR_get_error(), NULL));
+ }
+}
+
+/*
+ * Connects to the host |host| and port |port|. This function returns
+ * the file descriptor of the client socket.
+ */
+static int connect_to(const char *host, uint16_t port)
+{
+ struct addrinfo hints;
+ int fd = -1;
+ int rv;
+ char service[NI_MAXSERV];
+ struct addrinfo *res, *rp;
+ snprintf(service, sizeof(service), "%u", port);
+ memset(&hints, 0, sizeof(struct addrinfo));
+ hints.ai_family = AF_UNSPEC;
+ hints.ai_socktype = SOCK_STREAM;
+ rv = getaddrinfo(host, service, &hints, &res);
+ if(rv != 0) {
+ dief("getaddrinfo", gai_strerror(rv));
+ }
+ for(rp = res; rp; rp = rp->ai_next) {
+ fd = socket(rp->ai_family, rp->ai_socktype, rp->ai_protocol);
+ if(fd == -1) {
+ continue;
+ }
+ while((rv = connect(fd, rp->ai_addr, rp->ai_addrlen)) == -1 &&
+ errno == EINTR);
+ if(rv == 0) {
+ break;
+ }
+ close(fd);
+ fd = -1;
+ }
+ freeaddrinfo(res);
+ return fd;
+}
+
+static void make_non_block(int fd)
+{
+ int flags, rv;
+ while((flags = fcntl(fd, F_GETFL, 0)) == -1 && errno == EINTR);
+ if(flags == -1) {
+ dief("fcntl", strerror(errno));
+ }
+ while((rv = fcntl(fd, F_SETFL, flags | O_NONBLOCK)) == -1 && errno == EINTR);
+ if(rv == -1) {
+ dief("fcntl", strerror(errno));
+ }
+}
+
+/*
+ * Setting TCP_NODELAY is not mandatory for the SPDY protocol.
+ */
+static void set_tcp_nodelay(int fd)
+{
+ int val = 1;
+ int rv;
+ rv = setsockopt(fd, IPPROTO_TCP, TCP_NODELAY, &val, (socklen_t)sizeof(val));
+ if(rv == -1) {
+ dief("setsockopt", strerror(errno));
+ }
+}
+
+/*
+ * Update |pollfd| based on the state of |connection|.
+ */
+static void ctl_poll(struct pollfd *pollfd, struct Connection *connection)
+{
+ pollfd->events = 0;
+ if(spdylay_session_want_read(connection->session) ||
+ connection->want_io == WANT_READ) {
+ pollfd->events |= POLLIN;
+ }
+ if(spdylay_session_want_write(connection->session) ||
+ connection->want_io == WANT_WRITE) {
+ pollfd->events |= POLLOUT;
+ }
+}
+
+/*
+ * Submits the request |req| to the connection |connection|. This
+ * function does not send packets; just append the request to the
+ * internal queue in |connection->session|.
+ */
+static void submit_request(struct Connection *connection, struct Request *req)
+{
+ int pri = 0;
+ int rv;
+ const char *nv[15];
+ /* We always use SPDY/3 style header even if the negotiated protocol
+ version is SPDY/2. The library translates the header name as
+ necessary. Make sure that the last item is NULL! */
+ nv[0] = ":method"; nv[1] = "GET";
+ nv[2] = ":path"; nv[3] = req->path;
+ nv[4] = ":version"; nv[5] = "HTTP/1.1";
+ nv[6] = ":scheme"; nv[7] = "https";
+ nv[8] = ":host"; nv[9] = req->hostport;
+ nv[10] = "accept"; nv[11] = "*/*";
+ nv[12] = "user-agent"; nv[13] = "spdylay/"SPDYLAY_VERSION;
+ nv[14] = NULL;
+ rv = spdylay_submit_request(connection->session, pri, nv, NULL, req);
+ if(rv != 0) {
+ diec("spdylay_submit_request", rv);
+ }
+}
+
+/*
+ * Performs the network I/O.
+ */
+static void exec_io(struct Connection *connection)
+{
+ int rv;
+ rv = spdylay_session_recv(connection->session);
+ if(rv != 0) {
+ diec("spdylay_session_recv", rv);
+ }
+ rv = spdylay_session_send(connection->session);
+ if(rv != 0) {
+ diec("spdylay_session_send", rv);
+ }
+}
+
+static void request_init(struct Request *req, const struct URI *uri)
+{
+ req->host = strcopy(uri->host, uri->hostlen);
+ req->port = uri->port;
+ req->path = strcopy(uri->path, uri->pathlen);
+ req->hostport = strcopy(uri->hostport, uri->hostportlen);
+ req->stream_id = -1;
+ req->inflater = NULL;
+}
+
+static void request_free(struct Request *req)
+{
+ free(req->host);
+ free(req->path);
+ free(req->hostport);
+ spdylay_gzip_inflate_del(req->inflater);
+}
+
+/*
+ * Fetches the resource denoted by |uri|.
+ */
+static void fetch_uri(const struct URI *uri)
+{
+ spdylay_session_callbacks callbacks;
+ int fd;
+ SSL_CTX *ssl_ctx;
+ SSL *ssl;
+ struct Request req;
+ struct Connection connection;
+ int rv;
+ nfds_t npollfds = 1;
+ struct pollfd pollfds[1];
+ uint16_t spdy_proto_version;
+
+ request_init(&req, uri);
+
+ setup_spdylay_callbacks(&callbacks);
+
+ /* Establish connection and setup SSL */
+ fd = connect_to(req.host, req.port);
+ ssl_ctx = SSL_CTX_new(SSLv23_client_method());
+ if(ssl_ctx == NULL) {
+ dief("SSL_CTX_new", ERR_error_string(ERR_get_error(), NULL));
+ }
+ init_ssl_ctx(ssl_ctx, &spdy_proto_version);
+ ssl = SSL_new(ssl_ctx);
+ if(ssl == NULL) {
+ dief("SSL_new", ERR_error_string(ERR_get_error(), NULL));
+ }
+ /* To simplify the program, we perform SSL/TLS handshake in blocking
+ I/O. */
+ ssl_handshake(ssl, fd);
+
+ connection.ssl = ssl;
+ connection.want_io = IO_NONE;
+
+ /* Here make file descriptor non-block */
+ make_non_block(fd);
+ set_tcp_nodelay(fd);
+
+ printf("[INFO] SPDY protocol version = %d\n", spdy_proto_version);
+ rv = spdylay_session_client_new(&connection.session, spdy_proto_version,
+ &callbacks, &connection);
+ if(rv != 0) {
+ diec("spdylay_session_client_new", rv);
+ }
+
+ /* Submit the HTTP request to the outbound queue. */
+ submit_request(&connection, &req);
+
+ pollfds[0].fd = fd;
+ ctl_poll(pollfds, &connection);
+
+ /* Event loop */
+ while(spdylay_session_want_read(connection.session) ||
+ spdylay_session_want_write(connection.session)) {
+ int nfds = poll(pollfds, npollfds, -1);
+ if(nfds == -1) {
+ dief("poll", strerror(errno));
+ }
+ if(pollfds[0].revents & (POLLIN | POLLOUT)) {
+ exec_io(&connection);
+ }
+ if((pollfds[0].revents & POLLHUP) || (pollfds[0].revents & POLLERR)) {
+ die("Connection error");
+ }
+ ctl_poll(pollfds, &connection);
+ }
+
+ /* Resource cleanup */
+ spdylay_session_del(connection.session);
+ SSL_shutdown(ssl);
+ SSL_free(ssl);
+ SSL_CTX_free(ssl_ctx);
+ shutdown(fd, SHUT_WR);
+ close(fd);
+ request_free(&req);
+}
+
+static int parse_uri(struct URI *res, const char *uri)
+{
+ /* We only interested in https */
+ size_t len, i, offset;
+ memset(res, 0, sizeof(struct URI));
+ len = strlen(uri);
+ if(len < 9 || memcmp("https://", uri, 8) != 0) {
+ return -1;
+ }
+ offset = 8;
+ res->host = res->hostport = &uri[offset];
+ res->hostlen = 0;
+ if(uri[offset] == '[') {
+ /* IPv6 literal address */
+ ++offset;
+ ++res->host;
+ for(i = offset; i < len; ++i) {
+ if(uri[i] == ']') {
+ res->hostlen = i-offset;
+ offset = i+1;
+ break;
+ }
+ }
+ } else {
+ const char delims[] = ":/?#";
+ for(i = offset; i < len; ++i) {
+ if(strchr(delims, uri[i]) != NULL) {
+ break;
+ }
+ }
+ res->hostlen = i-offset;
+ offset = i;
+ }
+ if(res->hostlen == 0) {
+ return -1;
+ }
+ /* Assuming https */
+ res->port = 443;
+ if(offset < len) {
+ if(uri[offset] == ':') {
+ /* port */
+ const char delims[] = "/?#";
+ int port = 0;
+ ++offset;
+ for(i = offset; i < len; ++i) {
+ if(strchr(delims, uri[i]) != NULL) {
+ break;
+ }
+ if('0' <= uri[i] && uri[i] <= '9') {
+ port *= 10;
+ port += uri[i]-'0';
+ if(port > 65535) {
+ return -1;
+ }
+ } else {
+ return -1;
+ }
+ }
+ if(port == 0) {
+ return -1;
+ }
+ offset = i;
+ res->port = port;
+ }
+ }
+ res->hostportlen = uri+offset-res->host;
+ for(i = offset; i < len; ++i) {
+ if(uri[i] == '#') {
+ break;
+ }
+ }
+ if(i-offset == 0) {
+ res->path = "/";
+ res->pathlen = 1;
+ } else {
+ res->path = &uri[offset];
+ res->pathlen = i-offset;
+ }
+ return 0;
+}
+
+
+/*****
+ * end of code needed to utilize spdylay
+ */
+
+
+/*****
+ * start of code needed to utilize microspdy
+ */
+
+
+void
+standard_request_handler(void *cls,
+ struct SPDY_Request * request,
+ uint8_t priority,
+ const char *method,
+ const char *path,
+ const char *version,
+ const char *host,
+ const char *scheme,
+ struct SPDY_NameValue * headers)
+{
+ struct SPDY_Response *response=NULL;
+
+ if(strcmp(CLS,cls)!=0)
+ {
+ killchild(child,"wrong cls");
+ }
+
+ response =
SPDY_build_response(200,NULL,SPDY_HTTP_VERSION_1_1,NULL,RESPONSE_BODY,strlen(RESPONSE_BODY));
+
+ if(NULL==response){
+ fprintf(stdout,"no response obj\n");
+ exit(3);
+ }
+
+
if(SPDY_queue_response(request,response,true,false,NULL,(void*)strdup(path))!=SPDY_YES)
+ {
+ fprintf(stdout,"queue\n");
+ exit(4);
+ }
+}
+
+void
+session_closed_handler (void *cls,
+ struct SPDY_Session * session,
+ int by_client)
+{
+ printf("session_closed_handler called\n");
+
+ if(strcmp(CLS,cls)!=0)
+ {
+ killchild(child,"wrong cls");
+ }
+
+ if(SPDY_YES != by_client)
+ {
+ //killchild(child,"wrong by_client");
+ printf("session closed by server\n");
+ }
+ else
+ {
+ printf("session closed by client\n");
+ }
+
+ if(NULL == session)
+ {
+ killchild(child,"session is NULL");
+ }
+
+ session_closed_called = 1;
+}
+
+
+/*****
+ * end of code needed to utilize microspdy
+ */
+
+//child process
+void
+childproc(int port)
+{
+ struct URI uri;
+ struct sigaction act;
+ int rv;
+ char *uristr;
+
+ memset(&act, 0, sizeof(struct sigaction));
+ act.sa_handler = SIG_IGN;
+ sigaction(SIGPIPE, &act, 0);
+
+ asprintf(&uristr, "https://127.0.0.1:%i/",port);
+ if(NULL == (rcvbuf = malloc(strlen(RESPONSE_BODY)+1)))
+ killparent(parent,"no memory");
+
+ SSL_load_error_strings();
+ SSL_library_init();
+
+ rv = parse_uri(&uri, uristr);
+ if(rv != 0) {
+ killparent(parent,"parse_uri failed");
+ }
+ fetch_uri(&uri);
+
+ if(strcmp(rcvbuf, RESPONSE_BODY))
+ killparent(parent,"received data is different");
+}
+
+//parent proc
+int
+parentproc( int port)
+{
+ int childstatus;
+ unsigned long long timeoutlong=0;
+ struct timeval timeout;
+ int ret;
+ fd_set read_fd_set;
+ fd_set write_fd_set;
+ fd_set except_fd_set;
+ int maxfd = -1;
+ struct SPDY_Daemon *daemon;
+
+ SPDY_init();
+
+ daemon = SPDY_start_daemon(port,
+ DATADIR
"cert-and-key.pem",
+ DATADIR
"cert-and-key.pem",
+
NULL,&session_closed_handler,&standard_request_handler,NULL,CLS,SPDY_DAEMON_OPTION_END);
+
+ if(NULL==daemon){
+ printf("no daemon\n");
+ return 1;
+ }
+
+ timeout.tv_usec = 0;
+
+ do
+ {
+ FD_ZERO(&read_fd_set);
+ FD_ZERO(&write_fd_set);
+ FD_ZERO(&except_fd_set);
+
+ ret = SPDY_get_timeout(daemon, &timeoutlong);
+ if(SPDY_NO == ret || timeoutlong > 1)
+ {
+ timeout.tv_sec = 1;
+ }
+ else
+ {
+ timeout.tv_sec = timeoutlong;
+ }
+
+ maxfd = SPDY_get_fdset (daemon,
+ &read_fd_set,
+ &write_fd_set,
+ &except_fd_set);
+
+ ret = select(maxfd+1, &read_fd_set, &write_fd_set,
&except_fd_set, &timeout);
+
+ switch(ret) {
+ case -1:
+ printf("select error: %i\n", errno);
+ killchild(child, "select error");
+ break;
+ case 0:
+
+ break;
+ default:
+ SPDY_run(daemon);
+
+ break;
+ }
+ }
+ while(waitpid(child,&childstatus,WNOHANG) != child);
+
+ //give chance to the client to close socket and handle this in run
+ usleep(100000);
+ SPDY_run(daemon);
+
+ SPDY_stop_daemon(daemon);
+
+ SPDY_deinit();
+
+ return WEXITSTATUS(childstatus);
+}
+
+int main(int argc, char **argv)
+{
+ int port = get_port(12123);
+ parent = getpid();
+
+ child = fork();
+ if (child == -1)
+ {
+ fprintf(stderr, "can't fork, error %d\n", errno);
+ exit(EXIT_FAILURE);
+ }
+
+ if (child == 0)
+ {
+ childproc(port);
+ _exit(0);
+ }
+ else
+ {
+ int ret = parentproc(port);
+ if(1 == session_closed_called && 0 == ret)
+ exit(0);
+ else
+ exit(ret ? ret : 21);
+ }
+ return 1;
+}
Added: libmicrohttpd/src/testspdy/test_request_response_with_callback.c
===================================================================
--- libmicrohttpd/src/testspdy/test_request_response_with_callback.c
(rev 0)
+++ libmicrohttpd/src/testspdy/test_request_response_with_callback.c
2013-05-05 19:26:15 UTC (rev 27032)
@@ -0,0 +1,305 @@
+/*
+ This file is part of libmicrospdy
+ Copyright (C) 2013 Andrey Uzunov
+
+ This program is free software: you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation, either version 3 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/**
+ * @file request_response_with_callback.c
+ * @brief tests responses with callbacks
+ * @author Andrey Uzunov
+ */
+
+#include "platform.h"
+#include "microspdy.h"
+#include "stdio.h"
+#include <sys/wait.h>
+#include <ctype.h>
+#include "common.h"
+#include <sys/time.h>
+#include <sys/stat.h>
+
+int port;
+
+pid_t parent;
+pid_t child;
+
+int run = 1;
+int chunk_size=1;
+
+void
+killchild()
+{
+ kill(child, SIGKILL);
+ exit(1);
+}
+
+void
+killparent()
+{
+ kill(parent, SIGKILL);
+ _exit(1);
+}
+
+ssize_t
+response_callback (void *cls,
+ void *buffer,
+ size_t max,
+ bool *more)
+{
+ FILE *fd =(FILE*)cls;
+
+ size_t n;
+ if(chunk_size % 2)
+ n = chunk_size;
+ else
+ n = max - chunk_size;
+
+ if(n < 1) n = 1;
+ else if (n > max) n=max;
+ chunk_size++;
+
+ int ret = fread(buffer,1,n,fd);
+ *more = feof(fd) == 0;
+
+ //printf("more is %i\n",*more);
+
+ if(!(*more))
+ fclose(fd);
+
+ return ret;
+}
+
+
+void
+response_done_callback(void *cls,
+ struct SPDY_Response *response,
+ struct SPDY_Request *request,
+ bool streamopened)
+{
+ printf("answer for %s was sent\n", (char*)cls);
+
+ SPDY_destroy_request(request);
+ SPDY_destroy_response(response);
+ free(cls);
+
+ run = 0;
+}
+
+void
+standard_request_handler(void *cls,
+ struct SPDY_Request * request,
+ uint8_t priority,
+ const char *method,
+ const char *path,
+ const char *version,
+ const char *host,
+ const char *scheme,
+ struct SPDY_NameValue * headers)
+{
+ struct SPDY_Response *response=NULL;
+ struct SPDY_NameValue *resp_headers;
+
+ printf("received request for '%s %s %s'\n", method, path, version);
+
+ FILE *fd = fopen(DATADIR "spdy-draft.txt","r");
+
+ if(NULL == (resp_headers = SPDY_name_value_create()))
+ {
+ fprintf(stdout,"SPDY_name_value_create failed\n");
+ killchild();
+ }
+ if(SPDY_YES !=
SPDY_name_value_add(resp_headers,SPDY_HTTP_HEADER_CONTENT_TYPE,"text/plain"))
+ {
+ fprintf(stdout,"SPDY_name_value_add failed\n");
+ killchild();
+ }
+
+ response = SPDY_build_response_with_callback(200,NULL,
+
SPDY_HTTP_VERSION_1_1,resp_headers,&response_callback,fd,SPDY_MAX_SUPPORTED_FRAME_SIZE);
+ SPDY_name_value_destroy(resp_headers);
+
+ if(NULL==response){
+ fprintf(stdout,"no response obj\n");
+ killchild();
+ }
+
+ void *clspath = strdup(path);
+
+
if(SPDY_queue_response(request,response,true,false,&response_done_callback,clspath)!=SPDY_YES)
+ {
+ fprintf(stdout,"queue\n");
+ killchild();
+ }
+}
+
+int
+parentproc()
+{
+ int childstatus;
+ unsigned long long timeoutlong=0;
+ struct timeval timeout;
+ int ret;
+ fd_set read_fd_set;
+ fd_set write_fd_set;
+ fd_set except_fd_set;
+ int maxfd = -1;
+ struct SPDY_Daemon *daemon;
+
+ SPDY_init();
+
+ daemon = SPDY_start_daemon(port,
+ DATADIR
"cert-and-key.pem",
+ DATADIR
"cert-and-key.pem",
+ NULL,
+ NULL,
+
&standard_request_handler,
+ NULL,
+ NULL,
+
SPDY_DAEMON_OPTION_SESSION_TIMEOUT,
+ 1800,
+
SPDY_DAEMON_OPTION_END);
+
+ if(NULL==daemon){
+ printf("no daemon\n");
+ return 1;
+ }
+
+ timeout.tv_usec = 0;
+
+ do
+ {
+ FD_ZERO(&read_fd_set);
+ FD_ZERO(&write_fd_set);
+ FD_ZERO(&except_fd_set);
+
+ ret = SPDY_get_timeout(daemon, &timeoutlong);
+ if(SPDY_NO == ret || timeoutlong > 1)
+ {
+ timeout.tv_sec = 1;
+ }
+ else
+ {
+ timeout.tv_sec = timeoutlong;
+ }
+
+ maxfd = SPDY_get_fdset (daemon,
+ &read_fd_set,
+ &write_fd_set,
+ &except_fd_set);
+
+ ret = select(maxfd+1, &read_fd_set, &write_fd_set,
&except_fd_set, &timeout);
+
+ switch(ret) {
+ case -1:
+ printf("select error: %i\n", errno);
+ break;
+ case 0:
+
+ break;
+ default:
+ SPDY_run(daemon);
+
+ break;
+ }
+ }
+ while(waitpid(child,&childstatus,WNOHANG) != child);
+
+ SPDY_stop_daemon(daemon);
+
+ SPDY_deinit();
+
+ return WEXITSTATUS(childstatus);
+}
+
+#define MD5_LEN 32
+
+int
+md5(char *cmd, char *md5_sum)
+{
+ FILE *p = popen(cmd, "r");
+ if (p == NULL) return 0;
+
+ int i, ch;
+ for (i = 0; i < MD5_LEN && isxdigit(ch = fgetc(p)); i++) {
+ *md5_sum++ = ch;
+ }
+
+ *md5_sum = '\0';
+ pclose(p);
+ return i == MD5_LEN;
+}
+
+int
+childproc()
+{
+ char *cmd1;
+ char *cmd2;
+ char md5_sum1[33];
+ char md5_sum2[33];
+ int ret;
+ struct timeval tv1;
+ struct timeval tv2;
+ struct stat st;
+ //int secs;
+ uint64_t usecs;
+
+ asprintf(&cmd1, "spdycat https://127.0.0.1:%i/ | md5sum",port);
+ asprintf(&cmd2, "md5sum " DATADIR "spdy-draft.txt");
+
+ gettimeofday(&tv1, NULL);
+ md5(cmd1,md5_sum1);
+ gettimeofday(&tv2, NULL);
+ md5(cmd2,md5_sum2);
+
+ printf("downloaded file md5: %s\n", md5_sum1);
+ printf("original file md5: %s\n", md5_sum2);
+ ret = strcmp(md5_sum1, md5_sum2);
+
+ if(0 == ret && 0 == stat(DATADIR "spdy-draft.txt", &st))
+ {
+ usecs = (uint64_t)1000000 * (uint64_t)(tv2.tv_sec - tv1.tv_sec)
+ tv2.tv_usec - tv1.tv_usec;
+ printf("%i bytes read in %i usecs\n", st.st_size, usecs);
+ }
+
+ return ret;
+}
+
+
+int
+main(int argc, char **argv)
+{
+ port = get_port(11123);
+ parent = getpid();
+
+ child = fork();
+ if (-1 == child)
+ {
+ fprintf(stderr, "can't fork, error %d\n", errno);
+ exit(EXIT_FAILURE);
+ }
+
+ if (child == 0)
+ {
+ int ret = childproc();
+ _exit(ret);
+ }
+ else
+ {
+ int ret = parentproc();
+ exit(ret);
+ }
+ return 1;
+}
Added: libmicrohttpd/src/testspdy/test_requests_with_assets.c
===================================================================
--- libmicrohttpd/src/testspdy/test_requests_with_assets.c
(rev 0)
+++ libmicrohttpd/src/testspdy/test_requests_with_assets.c 2013-05-05
19:26:15 UTC (rev 27032)
@@ -0,0 +1,291 @@
+/*
+ This file is part of libmicrospdy
+ Copyright (C) 2012 Andrey Uzunov
+
+ This program is free software: you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation, either version 3 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/**
+ * @file requests_with_assets.c
+ * @brief tests several requests for an HTML and all its assets. For
+ * client spdycat (from spdylay) is used. The latter uses
+ * libxml2.
+ * @author Andrey Uzunov
+ */
+
+#include "platform.h"
+#include "microspdy.h"
+#include "common.h"
+#include <sys/wait.h>
+#include <stdio.h> /* printf, stderr, fprintf */
+#include <sys/types.h> /* pid_t */
+#include <unistd.h> /* _exit, fork */
+#include <stdlib.h> /* exit */
+#include <errno.h> /* errno */
+#include <sys/wait.h> /* pid_t */
+#include "common.h"
+
+#define HTML "<html>\
+<head>\
+<link href=\"file1.css\" rel=\"stylesheet\" type=\"text/css\" />\
+<link href=\"file2.css\" rel=\"stylesheet\" type=\"text/css\" />\
+<link href=\"file3.css\" rel=\"stylesheet\" type=\"text/css\" />\
+</head>\
+<body><b>Hi, this is libmicrospdy!</b>\
+</body></html>"
+
+#define CSS "@media
all{body{font-family:verdana,arial;color:#333;background-color:#fff;margin:0;padding:0}#navcontainer
ul{padding-left:0;background:#005cb9
url(http://cdn.computerhope.com/backbar.jpg) repeat-x left
top;padding-bottom:0;padding-top:0;color:#fff;float:right;font-weight:700;width:100%;border-top:1px
solid #333;border-bottom:1px solid #333;margin:0}#navcontainer ul li
a{color:#fff;text-decoration:none;float:left;border-top:1px solid
#fff;border-right:1px solid #333;border-left:1px solid #fff;border-bottom:1px
solid #333;padding:.2em 1em}#navcontainer ul li
a:hover{background:url(http://cdn.computerhope.com/backbar2.jpg) repeat-x left
top;background-color:#9fcfff;color:#333;border-top:1px solid
#333;border-right:1px solid #fff;border-left:1px solid #333;border-bottom:1px
solid #fff}a:visited{color:#636}a{color:#2a70d0}#content
a{text-decoration:none;border-bottom:1px solid #DBDBDB}#content
a:hover,a:active,a:focus{color:#c33;border-bottom:1px solid #c33}img{bor
der:0}#c
ontent-container1{float:left;width:100%;background:#fff
url(http://cdn.computerhope.com/back.jpg) repeat-y
0}.print,.email,.edit,.share,.up,.down,.book,.folder,.issue,.driver,.history,.news,.btips,.tips,.warn,.phone,.forum,.question{background:url(chs.png)
no-repeat top
left}#container{padding-left:150px;padding-right:265px}#container
.column{position:relative;float:left}#content{width:100%;padding:20px}#left-bar{width:150px;margin-left:-100%;left:225px;padding:10px}#container
> #left-bar{left:-190px}#right-bar{width:205px;margin-right:-265px;padding:0
10px}#topad{background:#9fcfff;text-align:center;padding:35px 0
4px}#leftad{clear:both;background:inherit;height:auto;margin:15px 0 0}#content
ul{position:relative;margin:10px 0 10px 10px;padding:0}#content ul
li{list-style-type:none;background:url(http://cdn.computerhope.com/arrow.png)
no-repeat top left;background-position:0 5px;line-height:1.5625;padding:0 0 8px
23px}ol li{margin-bottom:8px;line-height:1.5625}.print,.email,
.edit,.s
hare{padding-left:23px}.print{background-position:0
-868px;width:16px;height:16px}.email{background-position:0
-469px;width:16px;height:16px}.edit{background-position:0
-403px;width:16px;height:16px}.share{background-position:0
-1002px;width:16px;height:16px}#left-bar
li.title{color:#005cb9;font-weight:700;margin:1em
0}#right-box{width:180px;border:1px solid #005cb9;border-radius:15px 15px 15px
15px;background:#ebebeb;margin:90px 0 0;padding:10px}#right-box
ul.poll{margin-top:15px;font-weight:700;margin-bottom:10px}.up,.down{padding-left:20px;text-decoration:none;color:#333}.up{background-position:0
-1068px;width:16px;height:16px}.down{background-position:0
-269px;width:16px;height:16px}#right-box
li.title{color:#333;font-weight:700;margin:1em 0
0}#header{background:#9fcfff}#containercol2{background-color:#d0e8ff;width:700px;overflow:hidden;margin:0
auto}#containercol2
ul.col2{width:700px;list-style:none;float:left;padding:0}#containercol2 ul.col2
li h2{border:1px solid #005
cb9;back
ground:url(http://cdn.computerhope.com/backbar.jpg) repeat-x left
top;color:#fff;font-size:large;text-align:center}#containercol2 ul.col2
li{float:left;width:340px;padding:5px}#containercol2 ul
li.headline{border-bottom:1px solid
#327dac;background:gray}#bottomad{margin:14px 0
0}input.btn,input.bbtn{color:#333;background:#9fcfff;font-weight:700;border:1px
solid #005cb9;border-top:1px solid #eee;border-left:1px solid
#eee;cursor:pointer;margin:4px 0
0}input.sbar,input.bsbar{color:#333;width:110px;background:#fff}input.btn{width:115px;font-size:medium}input.sbar{font-size:medium}input.bbtn{width:110px;font-size:large}input.bsbar{width:350px;font-size:18px;margin-right:5px}h1{font-size:175%;margin-bottom:25px;border-bottom:1px
solid
#dadada;padding-bottom:.17em;letter-spacing:-.05em;font-weight:700}.ce{text-align:center}.tab{margin-left:40px}p{line-height:1.5625}.tabb{margin-left:40px;font-weight:700;line-height:1.4}.dtab{margin-left:80px}.dd{font-weight:700;margin-left:7px}.lb
{margin-
left:5px}.bld{font-weight:700}.bb{font-size:14pt;color:#005cb9;font-weight:700}.bbl{font-size:14pt;font-weight:700}.nb{color:#005cb9;font-weight:700}.rg{color:gray;font-weight:700}.sg{font-size:10pt;color:gray}.sm{font-size:small}.rb{color:#fff;font-weight:700;text-indent:.3cm}.wt{color:#fff;font-weight:700}.bwt{color:#fff;font-weight:700;font-size:14pt}.large{font-size:x-large}.red{color:red}table{clear:both}.mtable,.mtable2{border:0
solid silver;background-color:#e5e5e5;border-spacing:2px
1px;width:98%;margin-left:auto;margin-right:auto}table.mtable td,table.mtable2
td{border-spacing:5px 10px;padding:9px}table.mtable th,table.mtable2
th{background:#005cb9 url(http://cdn.computerhope.com/backbar.jpg) repeat-x
left top;color:#fff;font-weight:700;padding:5px}table.mtable
a{border-bottom:0!important}table.mtable tr:hover
td{background-color:#eee;cursor:pointer}td{vertical-align:top}.tcb{background:#005cb9
url(http://cdn.computerhope.com/backbar.jpg) repeat-x left top}.tclb{bac
kground-
color:#9fcfff}.tcllb{background-color:#d0e8ff}.tcw{background-color:#fff}.tcg{background-color:#ebebeb}.tcbl{background-color:#333}.tcy{border:1px
solid
#005cb9;background-color:#f1f5f9;overflow:auto;padding:15px}.icell{padding-left:15px;padding-bottom:3px}.mlb{background-color:#9fcfff;padding-left:15px;padding-bottom:3px;white-space:nowrap;width:120px;vertical-align:top}#footer{background:url(http://cdn.computerhope.com/footback.jpg)
repeat-x left top;background-color:#d0e8ff;clear:both;padding:5px}#footer ul
li{list-style-type:none;display:inline;background:inherit;margin:0}#footer li
a{float:left;text-decoration:none;width:300px;border-bottom:1px dotted
#327dac;padding:0 0 10px 10px}#footer li
a:hover{background:#005cb9;color:#fff}#creditfooter{display:none}.legal{text-align:center;font-size:11px}.legal
a{text-decoration:none;color:#333}.floatLeft{float:left;clear:left;margin-right:20px;margin-bottom:10px}.floatRight{float:right;margin-left:20px;margin-bottom:10px}.floatR
ightClea
r{float:right;clear:right;margin-left:20px}:first-child + html
#container{overflow:hidden}.book,.folder,.issue,.driver,.history,.news,.btips,.tips,.warn,.phone,.forum,.question{padding-left:22px;font-weight:700}.book{background-position:0
0;width:17px;height:18px}.tips{background-position:0
-68px;width:17px;height:17px}.btips{background-position:0
-135px;width:17px;height:17px}.history{background-position:0
-202px;width:17px;height:17px}.driver{background-position:0
-335px;width:17px;height:18px}.folder{background-position:0
-535px;width:17px;height:16px}.issue{background-position:0
-601px;width:17px;height:18px}.news{background-position:0
-669px;width:17px;height:14px}.forum{background-position:0
-733px;width:17px;height:18px}.phone{background-position:0
-801px;width:17px;height:17px}.question{background-position:0
-934px;width:17px;height:18px}.warn{background-position:0
-1134px;width:16px;height:16px}textarea,input{border:1px solid
#ccc;border-top:1px solid #8d8e90;border
-left:1p
x solid #8d8e90}textarea:focus,input:focus{border:1px solid #005cb9}#left-bar
ul,#right-box ul,#footer ul{margin:0;padding:0}#right-box li.poll,#navcontainer
ul li{display:inline}#noprint{margin:1px 0 0}#left-bar ul li,#right-box ul
li{margin-left:10px;list-style-type:none;padding:0}#right-box a,#left-bar
a{color:address@hidden
print{#header,#navcontainer,#topad,#left-bar,#right-bar,#bottomad,#footer,#search,#buttons,#noprint{display:none!important}#content
a{text-decoration:none;color:#000}#content,#container{font-family:\"Times New
Roman\",Times;background:transparent!important;text-indent:0!important;width:100%!important;border:0!important;float:none!important;position:static!important;overflow:visible!important;line-height:1;margin:0!important;padding:0!important}h1{font-size:14pt;margin-bottom:5px;border-bottom:0;padding-bottom:0;letter-spacing:-.05em;font-weight:700}h2{font-size:13pt}.bb{font-size:13pt;color:#005cb9;font-weight:700}#content
ul li:before{content:\"\00bb \
0020\"}#
content
.nb,.bb{font-weight:700;color:#000}table{margin-top:30px;margin-bottom:30px;border-collapse:collapse}th,td{border:1px
solid #333}}"
+
+#define JS "var _gaq = _gaq || [];\
+_gaq.push(['_setAccount', 'UA-222222222222222222222222-1']);\
+_gaq.push(['_trackPageview']);\
+(function() {\
+var ga = document.createElement('script'); ga.type = 'text/javascript';
ga.async = true;\
+//ga.src = ('https:' == document.location.protocol ? 'ZZZhttps://ssl' :
'ZZZhttp://www') + '.google-analytics.com/ga.js';\
+var s = document.getElementsByTagName('script')[0];
s.parentNode.insertBefore(ga, s);\
+})();"
+
+int port;
+
+#define NUM_CLIENTS 50
+
+pid_t parent;
+int html_req_count;
+int html_resp_count;
+
+int child_c;
+int children_pid[NUM_CLIENTS];
+int children_status[NUM_CLIENTS];
+
+int session_closed_called;
+
+void
+new_child(pid_t pid)
+{
+ //todo ids overflow
+ children_pid[child_c] = pid;
+ children_status[child_c++] = 1;
+}
+
+int
+alive_children()
+{
+ int i;
+ int dead;
+ int status;
+ int ret = 0;
+
+ for(i=NUM_CLIENTS-1;i>=0;--i)
+ {
+ if (1 != children_status[i])
+ continue;
+ dead = waitpid(children_pid[i], &status, WNOHANG);
+ if (0 == dead)
+ {
+ ret = 1;
+ continue;
+ }
+ if (WEXITSTATUS(status) != 0)
+ {
+ for (i=NUM_CLIENTS-1;i>=0;--i)
+ if (1 == children_status[i])
+ kill (children_pid[i], SIGKILL);
+ exit (WEXITSTATUS(status));
+ }
+ children_status[i] = 2;
+ }
+ return ret;
+}
+
+void
+killchild(int pid, char *message)
+{
+ printf("%s\nkilling %i\n",message,pid);
+ kill(pid, SIGKILL);
+ exit(1);
+}
+
+void
+killparent(int pid, const char *message)
+{
+ printf("%s\nkilling %i\n",message,pid);
+ kill(pid, SIGKILL);
+ _exit(1);
+}
+
+void
+standard_request_handler(void *cls,
+ struct SPDY_Request * request,
+ uint8_t priority,
+ const char *method,
+ const char *path,
+ const char *version,
+ const char *host,
+ const char *scheme,
+ struct SPDY_NameValue * headers)
+{
+ struct SPDY_Response *response;
+
+ if(NULL != strstr(path,".css"))
+ {
+ response =
SPDY_build_response(200,NULL,SPDY_HTTP_VERSION_1_1,NULL,CSS,strlen(CSS));
+ if(strcmp("/file3.css",path)==0)++html_resp_count;
+ }
+ /*else if(NULL != strstr(path,".js"))
+ {
+ response =
SPDY_build_response(200,NULL,SPDY_HTTP_VERSION_1_1,NULL,JS,strlen(JS));
+ }*/
+ else
+ {
+ response =
SPDY_build_response(200,NULL,SPDY_HTTP_VERSION_1_1,NULL,HTML,strlen(HTML));
+ }
+
+ if(NULL==response){
+ fprintf(stdout,"no response obj\n");
+ exit(3);
+ }
+
+
if(SPDY_queue_response(request,response,true,false,NULL,(void*)strdup(path))!=SPDY_YES)
+ {
+ fprintf(stdout,"queue\n");
+ exit(4);
+ }
+
+
+}
+
+void
+run_spdycat()
+{
+ pid_t child;
+ ++html_req_count;
+ child = fork();
+ if (child == -1)
+ {
+ killparent(parent,"fork failed\n");
+ }
+
+ if (child == 0)
+ {
+ int devnull;
+
+ close(1);
+ devnull = open("/dev/null", O_WRONLY);
+ if (1 != devnull)
+ {
+ dup2(devnull, 1);
+ close(devnull);
+ }
+ char *uri;
+ asprintf (&uri, "https://127.0.0.1:%i/%i.html", port,
html_req_count);
+ execlp ("spdycat", "spdycat", "-anv", uri, NULL);
+ killparent (parent, "executing spdycat failed");
+ }
+ else
+ {
+ new_child(child);
+ }
+}
+
+int
+parentproc()
+{
+ unsigned long long timeoutlong=0;
+ struct timeval timeout;
+ int ret;
+ fd_set read_fd_set;
+ fd_set write_fd_set;
+ fd_set except_fd_set;
+ int maxfd = -1;
+ struct SPDY_Daemon *daemon;
+
+ SPDY_init();
+
+ daemon = SPDY_start_daemon(port,
+ DATADIR
"cert-and-key.pem",
+ DATADIR
"cert-and-key.pem",
+ NULL,
+ NULL,
+
&standard_request_handler,
+ NULL,
+ NULL,
+
SPDY_DAEMON_OPTION_END);
+
+ if(NULL==daemon){
+ printf("no daemon\n");
+ return 1;
+ }
+
+ timeout.tv_usec = 0;
+
+ do
+ {
+ if(NUM_CLIENTS > html_req_count)
+ {
+ run_spdycat();
+ }
+
+ FD_ZERO(&read_fd_set);
+ FD_ZERO(&write_fd_set);
+ FD_ZERO(&except_fd_set);
+
+ ret = SPDY_get_timeout(daemon, &timeoutlong);
+ if(SPDY_NO == ret || timeoutlong > 1)
+ {
+ timeout.tv_sec = 1;
+ }
+ else
+ {
+ timeout.tv_sec = timeoutlong;
+ }
+
+ maxfd = SPDY_get_fdset (daemon,
+ &read_fd_set,
+ &write_fd_set,
+ &except_fd_set);
+
+ ret = select(maxfd+1, &read_fd_set, &write_fd_set,
&except_fd_set, &timeout);
+
+ switch(ret) {
+ case -1:
+ printf("select error: %i\n", errno);
+ break;
+ case 0:
+
+ break;
+ default:
+ SPDY_run(daemon);
+
+ break;
+ }
+ }
+ while(alive_children());
+
+ SPDY_stop_daemon(daemon);
+
+ SPDY_deinit();
+
+ return html_resp_count != html_req_count;
+}
+
+int main(int argc, char **argv)
+{
+ parent = getpid();
+ port = get_port(10123);
+
+ int ret = parentproc();
+ exit(ret);
+
+ return 1;
+}
Added: libmicrohttpd/src/testspdy/test_session_timeout.c
===================================================================
--- libmicrohttpd/src/testspdy/test_session_timeout.c
(rev 0)
+++ libmicrohttpd/src/testspdy/test_session_timeout.c 2013-05-05 19:26:15 UTC
(rev 27032)
@@ -0,0 +1,275 @@
+/*
+ This file is part of libmicrospdy
+ Copyright (C) 2013 Andrey Uzunov
+
+ This program is free software: you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation, either version 3 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/**
+ * @file session_timeout.c
+ * @brief tests closing sessions after set timeout. Openssl is used for
+ * client
+ * @author Andrey Uzunov
+ */
+
+#include "platform.h"
+#include "microspdy.h"
+#include "stdio.h"
+#include <sys/wait.h>
+#include <ctype.h>
+#include "common.h"
+#include <sys/time.h>
+#include <sys/stat.h>
+
+#define TIMEOUT 2
+
+int port;
+
+pid_t parent;
+pid_t child;
+
+int run = 1;
+int chunk_size=1;
+int new_session;
+int closed_session;
+int do_sleep;
+
+void
+killchild(char *msg)
+{
+ printf("%s\n",msg);
+ kill(child, SIGKILL);
+ exit(1);
+}
+
+void
+killparent(char *msg)
+{
+ printf("%s\n",msg);
+ kill(parent, SIGKILL);
+ _exit(1);
+}
+
+void
+new_session_cb (void *cls,
+ struct SPDY_Session * session)
+{
+ if(!new_session)do_sleep = 1;
+ new_session = 1;
+ printf("new session\n");
+}
+
+void
+closed_session_cb (void *cls,
+ struct SPDY_Session * session,
+ int by_client)
+{
+ printf("closed_session_cb called\n");
+
+ if(SPDY_YES == by_client)
+ {
+ killchild("closed by the client");
+ }
+ if(closed_session)
+ {
+ killchild("closed_session_cb called twice");
+ }
+
+ closed_session = 1;
+}
+
+int
+parentproc()
+{
+ int childstatus;
+ unsigned long long timeoutlong=0;
+ struct timeval timeout;
+ int ret;
+ fd_set read_fd_set;
+ fd_set write_fd_set;
+ fd_set except_fd_set;
+ int maxfd = -1;
+ struct SPDY_Daemon *daemon;
+
+ SPDY_init();
+
+ daemon = SPDY_start_daemon(port,
+ DATADIR
"cert-and-key.pem",
+ DATADIR
"cert-and-key.pem",
+ &new_session_cb,
+
&closed_session_cb,
+ NULL,
+ NULL,
+ NULL,
+
SPDY_DAEMON_OPTION_SESSION_TIMEOUT,
+ TIMEOUT,
+
SPDY_DAEMON_OPTION_END);
+
+ if(NULL==daemon){
+ printf("no daemon\n");
+ return 1;
+ }
+
+ timeout.tv_usec = 0;
+
+ do
+ {
+ do_sleep=0;
+ FD_ZERO(&read_fd_set);
+ FD_ZERO(&write_fd_set);
+ FD_ZERO(&except_fd_set);
+
+ ret = SPDY_get_timeout(daemon, &timeoutlong);
+
+ if(new_session && !closed_session)
+ {
+ if(SPDY_NO == ret)
+ {
+ killchild("SPDY_get_timeout returned wrong
SPDY_NO");
+ }
+ if(timeoutlong)
+ {
+ killchild("SPDY_get_timeout returned wrong
timeout");
+ }
+ }
+ else
+ {
+ if(SPDY_YES == ret)
+ {
+ killchild("SPDY_get_timeout returned wrong
SPDY_YES");
+ }
+ }
+
+ if(SPDY_NO == ret || timeoutlong > 1)
+ {
+ timeout.tv_sec = 1;
+ }
+ else
+ {
+ timeout.tv_sec = timeoutlong;
+ }
+
+ maxfd = SPDY_get_fdset (daemon,
+ &read_fd_set,
+ &write_fd_set,
+ &except_fd_set);
+
+ ret = select(maxfd+1, &read_fd_set, &write_fd_set,
&except_fd_set, &timeout);
+
+ switch(ret) {
+ case -1:
+ printf("select error: %i\n", errno);
+ break;
+ case 0:
+ /*if(new_session)
+ {
+ killchild("select returned wrong
number");
+ }*/
+ break;
+ default:
+ SPDY_run(daemon);
+ if(do_sleep)
+ {
+ sleep(TIMEOUT);
+ do_sleep = 0;
+ }
+
+ break;
+ }
+ }
+ while(waitpid(child,&childstatus,WNOHANG) != child);
+
+ if(!new_session || !closed_session)
+ {
+ killchild("child is dead, callback wasn't called");
+ }
+
+ ret = SPDY_get_timeout(daemon, &timeoutlong);
+
+ if(SPDY_YES == ret)
+ {
+ killchild("SPDY_get_timeout returned wrong SPDY_YES after child
died");
+ }
+
+ SPDY_stop_daemon(daemon);
+
+ SPDY_deinit();
+
+ return 0;
+}
+
+int
+childproc()
+{
+ pid_t devnull;
+ pid_t out;
+
+ out=dup(1);
+ //close(0);
+ close(1);
+ close(2);
+ /*devnull = open("/dev/null", O_RDONLY);
+ if (0 != devnull)
+ {
+ dup2(devnull, 0);
+ close(devnull);
+ }*/
+ devnull = open("/dev/null", O_WRONLY);
+ if (1 != devnull)
+ {
+ dup2(devnull, 1);
+ close(devnull);
+ }
+ devnull = open("/dev/null", O_WRONLY);
+ if (2 != devnull)
+ {
+ dup2(devnull, 2);
+ close(devnull);
+ }
+ char *uri;
+ asprintf (&uri, "127.0.0.1:%i", port);
+ execlp ("openssl", "openssl", "s_client", "-connect", uri, NULL);
+ close(1);
+ dup2(out,1);
+ close(out);
+ killparent ("executing openssl failed");
+ return 1;
+}
+
+
+int
+main(int argc, char **argv)
+{
+ port = get_port(11123);
+ parent = getpid();
+
+ child = fork();
+ if (-1 == child)
+ {
+ fprintf(stderr, "can't fork, error %d\n", errno);
+ exit(EXIT_FAILURE);
+ }
+
+ if (child == 0)
+ {
+ int ret = childproc();
+ _exit(ret);
+ }
+ else
+ {
+ int ret = parentproc();
+ exit(ret);
+ }
+ return 1;
+}
Added: libmicrohttpd/src/testspdy/test_struct_namevalue.c
===================================================================
--- libmicrohttpd/src/testspdy/test_struct_namevalue.c
(rev 0)
+++ libmicrohttpd/src/testspdy/test_struct_namevalue.c 2013-05-05 19:26:15 UTC
(rev 27032)
@@ -0,0 +1,340 @@
+/*
+ This file is part of libmicrospdy
+ Copyright (C) 2012 Andrey Uzunov
+
+ This program is free software: you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation, either version 3 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/**
+ * @file struct_namevalue.c
+ * @brief tests all the API functions for handling struct SPDY_NameValue
+ * @author Andrey Uzunov
+ */
+
+#include "platform.h"
+#include "microspdy.h"
+#include "common.h"
+#include "../microspdy/structures.h"
+#include "../microspdy/alstructures.h"
+
+char *pairs[] = {"one","1","two","2","three","3","four","4","five","5"};
+char *pairs_with_dups[] =
{"one","1","two","2","one","11","two","22","three","3","two","222","two","2222","four","","five","5"};//82
+char *pairs_with_empty[] = {"name","","name","value"};
+char *pairs_different[] = {"30","thirty","40","fouthy"};
+int size;
+int size2;
+int brake_at = 3;
+bool flag;
+
+int
+iterate_cb (void *cls, const char *name, const char * const * value, int
num_values)
+{
+ int *c = (int*)cls;
+
+ if(*c < 0 || *c > size)
+ exit(11);
+
+ if(strcmp(name,pairs[*c]) != 0)
+ {
+ FAIL_TEST("name is wrong\n");
+ }
+
+ if(1 != num_values)
+ {
+ FAIL_TEST("num_values is wrong\n");
+ }
+
+ if(strcmp(value[0],pairs[(*c)+1]) != 0)
+ {
+ FAIL_TEST("value is wrong\n");
+ }
+
+ (*c)+=2;
+
+ return SPDY_YES;
+}
+
+int
+iterate_brake_cb (void *cls, const char *name, const char * const *value, int
num_values)
+{
+ int *c = (int*)cls;
+
+ if(*c < 0 || *c >= brake_at)
+ {
+ FAIL_TEST("iteration was not interrupted\n");
+ }
+
+ (*c)++;
+
+ if(*c == brake_at) return SPDY_NO;
+
+ return SPDY_YES;
+}
+
+int
+main()
+{
+ SPDY_init();
+
+ const char *const*value;
+ const char *const*value2;
+ int i;
+ int j;
+ int cls = 0;
+ int ret;
+ int ret2;
+ void *ob1;
+ void *ob2;
+ void *ob3;
+ void *stream;
+ char data[] = "anything";
+ struct SPDY_NameValue *container;
+ struct SPDY_NameValue *container2;
+ struct SPDY_NameValue *container3;
+ struct SPDY_NameValue *container_arr[1];
+
+ size = sizeof(pairs)/sizeof(pairs[0]);
+
+ if(NULL == (container = SPDY_name_value_create ()))
+ {
+ FAIL_TEST("SPDY_name_value_create failed\n");
+ }
+
+ if(NULL != SPDY_name_value_lookup (container, "anything", &ret))
+ {
+ FAIL_TEST("SPDY_name_value_lookup failed\n");
+ }
+
+ if(SPDY_name_value_iterate (container, NULL, NULL) != 0)
+ {
+ FAIL_TEST("SPDY_name_value_iterate failed\n");
+ }
+
+ for(i=0;i<size; i+=2)
+ {
+ if(SPDY_YES !=
SPDY_name_value_add(container,pairs[i],pairs[i+1]))
+ {
+ FAIL_TEST("SPDY_name_value_add failed\n");
+ }
+
+ if(SPDY_name_value_iterate (container, NULL, NULL) != ((i / 2)
+ 1))
+ {
+ FAIL_TEST("SPDY_name_value_iterate failed\n");
+ }
+ }
+
+ if(NULL != SPDY_name_value_lookup (container, "anything", &ret))
+ {
+ FAIL_TEST("SPDY_name_value_lookup failed\n");
+ }
+
+ for(i=size - 2; i >= 0; i-=2)
+ {
+ value = SPDY_name_value_lookup(container,pairs[i], &ret);
+ if(NULL == value || 1 !=ret || strcmp(value[0], pairs[i+1]) !=
0)
+ {
+ printf("%i; %i; %i\n", value, ret, strcmp(value[0],
pairs[i+1]));
+ FAIL_TEST("SPDY_name_value_lookup failed\n");
+ }
+ }
+
+ SPDY_name_value_iterate (container, &iterate_cb, &cls);
+
+ cls = 0;
+ if(SPDY_name_value_iterate (container, &iterate_brake_cb, &cls) !=
brake_at)
+ {
+ FAIL_TEST("SPDY_name_value_iterate with brake failed\n");
+ }
+
+ SPDY_name_value_destroy(container);
+
+ //check everything with NULL values
+ for(i=0; i<6; ++i)
+ {
+ printf("%i ",i);
+ ob1 = (i & 4) ? data : NULL;
+ ob2 = (i & 2) ? data : NULL;
+ ob3 = (i & 1) ? data : NULL;
+ if(SPDY_INPUT_ERROR != SPDY_name_value_add(ob1,ob2,ob3))
+ {
+ FAIL_TEST("SPDY_name_value_add with NULLs failed\n");
+ }
+ }
+ printf("\n");
+ fflush(stdout);
+
+ if(SPDY_INPUT_ERROR != SPDY_name_value_iterate(NULL,NULL,NULL))
+ {
+ FAIL_TEST("SPDY_name_value_iterate with NULLs failed\n");
+ }
+
+ for(i=0; i<7; ++i)
+ {
+ printf("%i ",i);
+ ob1 = (i & 4) ? data : NULL;
+ ob2 = (i & 2) ? data : NULL;
+ ob3 = (i & 1) ? data : NULL;
+ if(NULL != SPDY_name_value_lookup(ob1,ob2,ob3))
+ {
+ FAIL_TEST("SPDY_name_value_lookup with NULLs failed\n");
+ }
+ }
+ printf("\n");
+ SPDY_name_value_destroy(NULL);
+
+ if(NULL == (container = SPDY_name_value_create ()))
+ {
+ FAIL_TEST("SPDY_name_value_create failed\n");
+ }
+
+ size = sizeof(pairs_with_dups)/sizeof(pairs_with_dups[0]);
+
+ for(i=0;i<size; i+=2)
+ {
+ if(SPDY_YES !=
SPDY_name_value_add(container,pairs_with_dups[i],pairs_with_dups[i+1]))
+ {
+ FAIL_TEST("SPDY_name_value_add failed\n");
+ }
+ }
+ if(SPDY_name_value_iterate (container, NULL, NULL) !=
atoi(pairs_with_dups[size - 1]))
+ {
+ FAIL_TEST("SPDY_name_value_iterate failed\n");
+ }
+ for(i=size - 2; i >= 0; i-=2)
+ {
+ value = SPDY_name_value_lookup(container,pairs_with_dups[i],
&ret);
+ if(NULL == value)
+ {
+ FAIL_TEST("SPDY_name_value_lookup failed\n");
+ }
+ flag = false;
+ for(j=0; j<ret; ++j)
+ if(0 == strcmp(pairs_with_dups[i + 1], value[j]))
+ {
+ if(flag)
+ FAIL_TEST("SPDY_name_value_lookup
failed\n");
+ flag=true;
+ }
+
+ if(!flag)
+ FAIL_TEST("SPDY_name_value_lookup failed\n");
+ }
+ if(SPDY_NO !=
SPDY_name_value_add(container,pairs_with_dups[0],pairs_with_dups[1]))
+ FAIL_TEST("SPDY_name_value_add failed\n");
+
+ SPDY_name_value_destroy(container);
+
+ if(NULL == (container = SPDY_name_value_create ()))
+ {
+ FAIL_TEST("SPDY_name_value_create failed\n");
+ }
+
+ size = sizeof(pairs_with_empty)/sizeof(pairs_with_empty[0]);
+
+ for(i=0;i<size; i+=2)
+ {
+ if(SPDY_YES !=
SPDY_name_value_add(container,pairs_with_empty[i],pairs_with_empty[i+1]))
+ {
+ FAIL_TEST("SPDY_name_value_add failed\n");
+ }
+ value = SPDY_name_value_lookup(container,pairs_with_empty[i],
&ret);
+ if(NULL == value || 1 != ret)
+ {
+ printf("%i; %i\n", value, ret);
+ FAIL_TEST("SPDY_name_value_lookup failed\n");
+ }
+ }
+
+ ret = SPDY_name_value_iterate(container, NULL, NULL);
+ if(SPDY_INPUT_ERROR != SPDY_name_value_add(container,
"capitalLeter","anything")
+ || SPDY_name_value_iterate(container, NULL, NULL) != ret)
+ {
+ FAIL_TEST("SPDY_name_value_add failed\n");
+ }
+
+ SPDY_name_value_destroy(container);
+
+ if(NULL == (container = SPDY_name_value_create ()))
+ {
+ FAIL_TEST("SPDY_name_value_create failed\n");
+ }
+
+ size = sizeof(pairs_with_dups)/sizeof(pairs_with_dups[0]);
+
+ for(i=0;i<size; i+=2)
+ {
+ if(SPDY_YES !=
SPDY_name_value_add(container,pairs_with_dups[i],pairs_with_dups[i+1]))
+ {
+ FAIL_TEST("SPDY_name_value_add failed\n");
+ }
+ }
+
+ if(NULL == (container2 = SPDY_name_value_create ()))
+ {
+ FAIL_TEST("SPDY_name_value_create failed\n");
+ }
+
+ size2 = sizeof(pairs_different)/sizeof(pairs_different[0]);
+
+ for(i=0;i<size2; i+=2)
+ {
+ if(SPDY_YES !=
SPDY_name_value_add(container2,pairs_different[i],pairs_different[i+1]))
+ {
+ FAIL_TEST("SPDY_name_value_add failed\n");
+ }
+ }
+
+ container_arr[0] = container;
+ container_arr[1] = container2;
+ if(0 > (ret = SPDYF_name_value_to_stream(container_arr, 2, &stream)) ||
NULL == stream)
+ FAIL_TEST("SPDYF_name_value_to_stream failed\n");
+ ret = SPDYF_name_value_from_stream(stream, ret, &container3);
+ if(SPDY_YES != ret)
+ FAIL_TEST("SPDYF_name_value_from_stream failed\n");
+
+ if(SPDY_name_value_iterate(container3, NULL, NULL)
+ != (SPDY_name_value_iterate(container, NULL, NULL) +
SPDY_name_value_iterate(container2, NULL, NULL)))
+ FAIL_TEST("SPDYF_name_value_from_stream failed\n");
+
+ for(i=size - 2; i >= 0; i-=2)
+ {
+ value = SPDY_name_value_lookup(container,pairs_with_dups[i],
&ret);
+ if(NULL == value)
+ FAIL_TEST("SPDY_name_value_lookup failed\n");
+ value2 = SPDY_name_value_lookup(container3,pairs_with_dups[i],
&ret2);
+ if(NULL == value2)
+ FAIL_TEST("SPDY_name_value_lookup failed\n");
+
+ for(j=0; j<ret; ++j)
+ if(0 != strcmp(value2[j], value[j]))
+ FAIL_TEST("SPDY_name_value_lookup failed\n");
+ }
+ for(i=size2 - 2; i >= 0; i-=2)
+ {
+ value = SPDY_name_value_lookup(container2,pairs_different[i],
&ret);
+ if(NULL == value)
+ FAIL_TEST("SPDY_name_value_lookup failed\n");
+ value2 = SPDY_name_value_lookup(container3,pairs_different[i],
&ret2);
+ if(NULL == value2)
+ FAIL_TEST("SPDY_name_value_lookup failed\n");
+
+ for(j=0; j<ret; ++j)
+ if(0 != strcmp(value2[j], value[j]))
+ FAIL_TEST("SPDY_name_value_lookup failed\n");
+ }
+
+ SPDY_deinit();
+
+ return 0;
+}
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- [GNUnet-SVN] r27032 - in libmicrohttpd/src: . testspdy,
gnunet <=