[GNUnet-SVN] r32888 - eclectic/gplmt/contrib/tasklists

[gnunet]

Author: harsha
Date: 2014-04-03 15:01:07 +0200 (Thu, 03 Apr 2014)
New Revision: 32888

Added:
   eclectic/gplmt/contrib/tasklists/Install_gcrypt-1.6.0.xml
   eclectic/gplmt/contrib/tasklists/deploy_gnunet_fc14.xml
Log:
Add tasklists to install libgcrypt-1.6.0 and GNUnet SVN on FC14.


Added: eclectic/gplmt/contrib/tasklists/Install_gcrypt-1.6.0.xml
===================================================================
--- eclectic/gplmt/contrib/tasklists/Install_gcrypt-1.6.0.xml                   
        (rev 0)
+++ eclectic/gplmt/contrib/tasklists/Install_gcrypt-1.6.0.xml   2014-04-03 
13:01:07 UTC (rev 32888)
@@ -0,0 +1,92 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<tasklist xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"; 
xsi:noNamespaceSchemaLocation="../tasklist_schema.xsd" name="Install 
gcrypt-1.6.0">
+  <options/>
+  <sequence name="Stop if libgcrypt is already installed" enabled="true">
+    <run name="Check if /usr/local/lib/libgcrypt.so.20 exits and stop if it 
does" id="1" enabled="true">
+      <command>stat /usr/local/lib/libgcrypt.so.20</command>
+      <arguments></arguments>
+      <timeout>0</timeout>
+      <expected_return_code>1</expected_return_code>
+      <expected_output></expected_output>
+      <stop_on_fail>true</stop_on_fail>
+    </run>
+  </sequence>
+  <sequence name="Check and install GCC if not present" enabled="true">
+    <run name="Check and install gcc and make" id="1" enabled="true">
+      <command>which gcc || sudo -S yum -y -t --nogpgcheck install gcc 
&amp;&amp; sudo -S yum -y -t --nogpgcheck install make</command>
+      <arguments></arguments>
+      <timeout>0</timeout>
+      <expected_return_code>0</expected_return_code>
+      <expected_output></expected_output>
+      <stop_on_fail>true</stop_on_fail>
+    </run>
+  </sequence>
+  <sequence name="" enabled="true">
+    <run name="Prepare build dir and download libgpg-error" id="1" 
enabled="true">
+      <command>mkdir libgpg-error; cd libgpg-error; wget 
ftp://ftp.gnupg.org/gcrypt/libgpg-error/libgpg-error-1.12.tar.bz2</command>
+      <arguments></arguments>
+      <timeout>0</timeout>
+      <expected_return_code>0</expected_return_code>
+      <expected_output></expected_output>
+      <stop_on_fail>true</stop_on_fail>
+    </run>
+    <run name="Unbundle libgpg-error-1.12" id="2" enabled="true">
+      <command>cd libgpg-error; tar xaf libgpg-error-1.12.tar.bz2</command>
+      <arguments></arguments>
+      <timeout>0</timeout>
+      <expected_return_code>0</expected_return_code>
+      <expected_output></expected_output>
+      <stop_on_fail>true</stop_on_fail>
+    </run>
+    <run name="Configure libgpg-error-1.12" id="3" enabled="true">
+      <command>cd libgpg-error/libgpg-error-1.12; ./configure 
--prefix=/usr/local</command>
+      <arguments></arguments>
+      <timeout>0</timeout>
+      <expected_return_code>0</expected_return_code>
+      <expected_output></expected_output>
+      <stop_on_fail>true</stop_on_fail>
+    </run>
+    <run name="Compile and Install libgpg-error-1.12" id="4" enabled="true">
+      <command>cd libgpg-error/libgpg-error-1.12; make &amp;&amp; sudo -S make 
install</command>
+      <arguments></arguments>
+      <timeout>0</timeout>
+      <expected_return_code>0</expected_return_code>
+      <expected_output></expected_output>
+      <stop_on_fail>true</stop_on_fail>
+    </run>
+  </sequence>
+  <sequence name="Install libgcrypt-1.6.1" enabled="true">
+    <run name="Prepare libgcrypt build dir and download source" id="1" 
enabled="true">
+      <command>mkdir libgcrypt; cd libgcrypt; wget</command>
+      
<arguments>ftp://ftp.gnupg.org/gcrypt/libgcrypt/libgcrypt-1.6.1.tar.bz2</arguments>
+      <timeout>0</timeout>
+      <expected_return_code>0</expected_return_code>
+      <expected_output></expected_output>
+      <stop_on_fail>true</stop_on_fail>
+    </run>
+    <run name="Unpack" id="2" enabled="true">
+      <command>cd libgcrypt; tar xaf libgcrypt-1.6.1.tar.bz2</command>
+      <arguments></arguments>
+      <timeout>0</timeout>
+      <expected_return_code>0</expected_return_code>
+      <expected_output></expected_output>
+      <stop_on_fail>true</stop_on_fail>
+    </run>
+    <run name="Configure libgcrypt-1.6.1" id="3" enabled="true">
+      <command>cd libgcrypt/libgcrypt-1.6.1; ./configure --prefix=/usr/local 
--with-libgpg-error=/usr/local</command>
+      <arguments></arguments>
+      <timeout>0</timeout>
+      <expected_return_code>0</expected_return_code>
+      <expected_output></expected_output>
+      <stop_on_fail>true</stop_on_fail>
+    </run>
+    <run name="Compile and install" id="4" enabled="true">
+      <command>cd libgcrypt/libgcrypt-1.6.1; make &amp;&amp; sudo -S make 
install</command>
+      <arguments></arguments>
+      <timeout>0</timeout>
+      <expected_return_code>0</expected_return_code>
+      <expected_output></expected_output>
+      <stop_on_fail>true</stop_on_fail>
+    </run>
+  </sequence>
+</tasklist>

Added: eclectic/gplmt/contrib/tasklists/deploy_gnunet_fc14.xml
===================================================================
--- eclectic/gplmt/contrib/tasklists/deploy_gnunet_fc14.xml                     
        (rev 0)
+++ eclectic/gplmt/contrib/tasklists/deploy_gnunet_fc14.xml     2014-04-03 
13:01:07 UTC (rev 32888)
@@ -0,0 +1,444 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<tasklist xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"; 
xsi:noNamespaceSchemaLocation="../tasklist_schema.xsd" name="Deploy GNUnet 
fc14">
+  <options/>
+  <run name="check peer" id="1" enabled="true">
+    <command>sudo -S date</command>
+    <arguments></arguments>
+    <timeout>10</timeout>
+    <expected_return_code>0</expected_return_code>
+    <expected_output>2014</expected_output>
+    <stop_on_fail>true</stop_on_fail>
+  </run>
+  <sequence name="" enabled="true">
+    <run name="Install dependencies with yum : gcc" id="1" enabled="true">
+      <command>sudo -S yum -y -t --nogpgcheck install</command>
+      <arguments>gcc</arguments>
+      <timeout>0</timeout>
+      <expected_return_code>0</expected_return_code>
+      <expected_output></expected_output>
+      <stop_on_fail>false</stop_on_fail>
+    </run>
+    <run name="Install dependencies with yum : make" id="2" enabled="true">
+      <command>sudo -S yum -y -t --nogpgcheck install</command>
+      <arguments>make</arguments>
+      <timeout>0</timeout>
+      <expected_return_code>0</expected_return_code>
+      <expected_output></expected_output>
+      <stop_on_fail>false</stop_on_fail>
+    </run>
+    <run name="Install dependencies with yum : autoconf" id="3" enabled="true">
+      <command>sudo -S yum -y -t --nogpgcheck install</command>
+      <arguments>autoconf</arguments>
+      <timeout>0</timeout>
+      <expected_return_code>0</expected_return_code>
+      <expected_output></expected_output>
+      <stop_on_fail>false</stop_on_fail>
+    </run>
+    <run name="Install dependencies with yum : gettext-devel" id="4" 
enabled="true">
+      <command>sudo -S yum -y -t --nogpgcheck install</command>
+      <arguments>gettext-devel</arguments>
+      <timeout>0</timeout>
+      <expected_return_code>0</expected_return_code>
+      <expected_output></expected_output>
+      <stop_on_fail>false</stop_on_fail>
+    </run>
+    <run name="Install dependencies with yum : texinfo" id="5" enabled="true">
+      <command>sudo -S yum -y -t --nogpgcheck install</command>
+      <arguments>texinfo</arguments>
+      <timeout>0</timeout>
+      <expected_return_code>0</expected_return_code>
+      <expected_output></expected_output>
+      <stop_on_fail>false</stop_on_fail>
+    </run>
+    <run name="Install dependencies with yum : libunistring-devel" id="6" 
enabled="true">
+      <command>sudo -S yum -y -t --nogpgcheck install</command>
+      <arguments>libunistring-devel</arguments>
+      <timeout>0</timeout>
+      <expected_return_code>0</expected_return_code>
+      <expected_output></expected_output>
+      <stop_on_fail>false</stop_on_fail>
+    </run>
+    <run name="Install dependencies with yum : gnutls-devel" id="7" 
enabled="true">
+      <command>sudo -S yum -y -t --nogpgcheck install</command>
+      <arguments>gnutls-devel</arguments>
+      <timeout>0</timeout>
+      <expected_return_code>0</expected_return_code>
+      <expected_output></expected_output>
+      <stop_on_fail>false</stop_on_fail>
+    </run>
+    <run name="Install dependencies with yum : zlib-devel" id="9" 
enabled="true">
+      <command>sudo -S yum -y -t --nogpgcheck install</command>
+      <arguments>zlib-devel</arguments>
+      <timeout>0</timeout>
+      <expected_return_code>0</expected_return_code>
+      <expected_output></expected_output>
+      <stop_on_fail>false</stop_on_fail>
+    </run>
+    <run name="Install dependencies with yum : sqlite-devel" id="10" 
enabled="true">
+      <command>sudo -S yum -y -t --nogpgcheck install</command>
+      <arguments>sqlite-devel</arguments>
+      <timeout>0</timeout>
+      <expected_return_code>0</expected_return_code>
+      <expected_output></expected_output>
+      <stop_on_fail>false</stop_on_fail>
+    </run>
+    <run name="Install dependencies with yum : postgresql-devel" id="11" 
enabled="true">
+      <command>sudo -S yum -y -t --nogpgcheck install</command>
+      <arguments>postgresql-devel</arguments>
+      <timeout>0</timeout>
+      <expected_return_code>0</expected_return_code>
+      <expected_output></expected_output>
+      <stop_on_fail>false</stop_on_fail>
+    </run>
+    <run name="Install dependencies with yum : mysql-devel" id="12" 
enabled="true">
+      <command>sudo -S yum -y -t --nogpgcheck install</command>
+      <arguments>mysql-devel</arguments>
+      <timeout>0</timeout>
+      <expected_return_code>0</expected_return_code>
+      <expected_output></expected_output>
+      <stop_on_fail>false</stop_on_fail>
+    </run>
+    <run name="Install dependencies with yum : libgsf-devel" id="13" 
enabled="true">
+      <command>sudo -S yum -y -t --nogpgcheck install</command>
+      <arguments>libgsf-devel</arguments>
+      <timeout>0</timeout>
+      <expected_return_code>0</expected_return_code>
+      <expected_output></expected_output>
+      <stop_on_fail>false</stop_on_fail>
+    </run>
+    <run name="Install dependencies with yum : libvorbis-devel" id="14" 
enabled="true">
+      <command>sudo -S yum -y -t --nogpgcheck install</command>
+      <arguments>libvorbis-devel</arguments>
+      <timeout>0</timeout>
+      <expected_return_code>0</expected_return_code>
+      <expected_output></expected_output>
+      <stop_on_fail>false</stop_on_fail>
+    </run>
+  </sequence>
+  <sequence name="" enabled="true">
+    <run name="Install dependencies with yum : subversion" id="1" 
enabled="true">
+      <command>sudo -S yum -y -t --nogpgcheck install</command>
+      <arguments>subversion</arguments>
+      <timeout>0</timeout>
+      <expected_return_code>0</expected_return_code>
+      <expected_output></expected_output>
+      <stop_on_fail>false</stop_on_fail>
+    </run>
+    <run name="Install dependencies with yum : sqlite-devel" id="2" 
enabled="true">
+      <command>sudo yum -y -t --nogpgcheck install</command>
+      <arguments>sqlite-devel</arguments>
+      <timeout>0</timeout>
+      <expected_return_code>0</expected_return_code>
+      <expected_output></expected_output>
+      <stop_on_fail>false</stop_on_fail>
+    </run>
+    <run name="Install dependencies with yum : libidn-devel" id="3" 
enabled="true">
+      <command>sudo yum -y -t --nogpgcheck install</command>
+      <arguments>libidn-devel</arguments>
+      <timeout>0</timeout>
+      <expected_return_code>0</expected_return_code>
+      <expected_output></expected_output>
+      <stop_on_fail>true</stop_on_fail>
+    </run>
+  </sequence>
+  <sequence name="" enabled="true">
+    <run name="Download libtool" id="1" enabled="true">
+      <command>mkdir libtool; cd libtool; wget</command>
+      
<arguments>http://ftp.gnu.org/gnu/libtool/libtool-2.4.2.tar.gz</arguments>
+      <timeout>0</timeout>
+      <expected_return_code>0</expected_return_code>
+      <expected_output></expected_output>
+      <stop_on_fail>true</stop_on_fail>
+    </run>
+    <run name="Unpack libtool" id="2" enabled="true">
+      <command>cd libtool; tar xfvz</command>
+      <arguments>libtool-2.4.2.tar.gz</arguments>
+      <timeout>0</timeout>
+      <expected_return_code>0</expected_return_code>
+      <expected_output></expected_output>
+      <stop_on_fail>true</stop_on_fail>
+    </run>
+    <run name="Configure libtool" id="3" enabled="true">
+      <command>cd libtool/libtool-2.4.2; ./configure</command>
+      <arguments>--prefix=/usr/local</arguments>
+      <timeout>0</timeout>
+      <expected_return_code>0</expected_return_code>
+      <expected_output></expected_output>
+      <stop_on_fail>true</stop_on_fail>
+    </run>
+    <run name="Install libtool" id="4" enabled="true">
+      <command>cd libtool/libtool-2.4.2; sudo -S make install</command>
+      <arguments></arguments>
+      <timeout>0</timeout>
+      <expected_return_code>0</expected_return_code>
+      <expected_output></expected_output>
+      <stop_on_fail>true</stop_on_fail>
+    </run>
+  </sequence>
+  <sequence name="" enabled="false">
+    <run name="Download libcurl" id="1" enabled="true">
+      <command>mkdir libcurl; cd libcurl; wget</command>
+      <arguments>http://curl.haxx.se/download/curl-7.26.0.tar.gz</arguments>
+      <timeout>0</timeout>
+      <expected_return_code>0</expected_return_code>
+      <expected_output></expected_output>
+      <stop_on_fail>true</stop_on_fail>
+    </run>
+    <run name="Unpack libcurl" id="2" enabled="true">
+      <command>cd libcurl; tar -xzvf</command>
+      <arguments>curl-7.26.0.tar.gz</arguments>
+      <timeout>0</timeout>
+      <expected_return_code>0</expected_return_code>
+      <expected_output></expected_output>
+      <stop_on_fail>true</stop_on_fail>
+    </run>
+    <run name="Configure libcurl" id="3" enabled="true">
+      <command>cd libcurl/curl-7.26.0; ./configure</command>
+      <arguments>--with-gnutls</arguments>
+      <timeout>0</timeout>
+      <expected_return_code>0</expected_return_code>
+      <expected_output></expected_output>
+      <stop_on_fail>true</stop_on_fail>
+    </run>
+    <run name="Install libcurl" id="4" enabled="true">
+      <command>cd libcurl/curl-7.26.0; sudo -S make install</command>
+      <arguments></arguments>
+      <timeout>0</timeout>
+      <expected_return_code>0</expected_return_code>
+      <expected_output></expected_output>
+      <stop_on_fail>true</stop_on_fail>
+    </run>
+  </sequence>
+  <sequence name="" enabled="false">
+    <run name="Download glpk" id="1" enabled="true">
+      <command>mkdir glpk; cd glpk; wget</command>
+      <arguments>http://ftp.gnu.org/gnu/glpk/glpk-4.47.tar.gz</arguments>
+      <timeout>0</timeout>
+      <expected_return_code>0</expected_return_code>
+      <expected_output></expected_output>
+      <stop_on_fail>true</stop_on_fail>
+    </run>
+    <run name="Unpack glpk" id="2" enabled="true">
+      <command>cd glpk; tar -xzvf</command>
+      <arguments>glpk-4.47.tar.gz</arguments>
+      <timeout>0</timeout>
+      <expected_return_code>0</expected_return_code>
+      <expected_output></expected_output>
+      <stop_on_fail>true</stop_on_fail>
+    </run>
+    <run name="Configure glpk" id="3" enabled="true">
+      <command>cd glpk/glpk-4.47; ./configure</command>
+      <arguments>--with-gnutls</arguments>
+      <timeout>0</timeout>
+      <expected_return_code>0</expected_return_code>
+      <expected_output></expected_output>
+      <stop_on_fail>true</stop_on_fail>
+    </run>
+    <run name="Install glpk" id="4" enabled="true">
+      <command>cd glpk/glpk-4.47; sudo -S make install</command>
+      <arguments></arguments>
+      <timeout>0</timeout>
+      <expected_return_code>0</expected_return_code>
+      <expected_output></expected_output>
+      <stop_on_fail>true</stop_on_fail>
+    </run>
+  </sequence>
+  <sequence name="" enabled="false">
+    <run name="Download libextractor-0.6.3" id="1" enabled="true">
+      <command>mkdir libextractor; cd libextractor; wget</command>
+      
<arguments>ftp://ftp.gnu.org/gnu/libextractor/libextractor-0.6.3.tar.gz</arguments>
+      <timeout>0</timeout>
+      <expected_return_code>0</expected_return_code>
+      <expected_output></expected_output>
+      <stop_on_fail>true</stop_on_fail>
+    </run>
+    <run name="Unpack libextractor" id="2" enabled="true">
+      <command>cd libextractor; tar -xzvf</command>
+      <arguments>libextractor-0.6.3.tar.gz</arguments>
+      <timeout>0</timeout>
+      <expected_return_code>0</expected_return_code>
+      <expected_output></expected_output>
+      <stop_on_fail>true</stop_on_fail>
+    </run>
+    <run name="Configure libextractor" id="3" enabled="true">
+      <command>cd libextractor/libextractor-0.6.3; ./configure</command>
+      <arguments>--prefix=/usr/local</arguments>
+      <timeout>0</timeout>
+      <expected_return_code>0</expected_return_code>
+      <expected_output></expected_output>
+      <stop_on_fail>true</stop_on_fail>
+    </run>
+    <run name="Install libextractor" id="4" enabled="true">
+      <command>cd libextractor/libextractor-0.6.3; sudo -S make 
install</command>
+      <arguments></arguments>
+      <timeout>0</timeout>
+      <expected_return_code>0</expected_return_code>
+      <expected_output></expected_output>
+      <stop_on_fail>true</stop_on_fail>
+    </run>
+  </sequence>
+    <sequence name="" enabled="true">
+    <run name="Download libextractor-1.3" id="1" enabled="true">
+      <command>mkdir libextractor; cd libextractor; wget</command>
+      
<arguments>ftp://ftp.gnu.org/gnu/libextractor/libextractor-1.3.tar.gz</arguments>
+      <timeout>0</timeout>
+      <expected_return_code>0</expected_return_code>
+      <expected_output></expected_output>
+      <stop_on_fail>true</stop_on_fail>
+    </run>
+    <run name="Unpack libextractor" id="2" enabled="true">
+      <command>cd libextractor; tar -xzvf</command>
+      <arguments>libextractor-1.3.tar.gz</arguments>
+      <timeout>0</timeout>
+      <expected_return_code>0</expected_return_code>
+      <expected_output></expected_output>
+      <stop_on_fail>true</stop_on_fail>
+    </run>
+    <run name="Configure libextractor" id="3" enabled="true">
+      <command>cd libextractor/libextractor-1.3; ./configure</command>
+      <arguments>--prefix=/usr/local</arguments>
+      <timeout>0</timeout>
+      <expected_return_code>0</expected_return_code>
+      <expected_output></expected_output>
+      <stop_on_fail>true</stop_on_fail>
+    </run>
+    <run name="Install libextractor" id="4" enabled="true">
+      <command>cd libextractor/libextractor-1.3; sudo -S make install</command>
+      <arguments></arguments>
+      <timeout>0</timeout>
+      <expected_return_code>0</expected_return_code>
+      <expected_output></expected_output>
+      <stop_on_fail>true</stop_on_fail>
+    </run>
+  </sequence>
+  <sequence name="" enabled="false">
+    <run name="Download Extractor" id="1" enabled="true">
+      <command>svn checkout</command>
+      <arguments>https://gnunet.org/svn/Extractor</arguments>
+      <timeout>0</timeout>
+      <expected_return_code>0</expected_return_code>
+      <expected_output></expected_output>
+      <stop_on_fail>false</stop_on_fail>
+    </run>
+    <run name="Bootstrap Extractor" id="2" enabled="true">
+      <command>cd Extractor; libtoolize; ./bootstrap</command>
+      <arguments></arguments>
+      <timeout>0</timeout>
+      <expected_return_code>0</expected_return_code>
+      <expected_output></expected_output>
+      <stop_on_fail>true</stop_on_fail>
+    </run>
+    <run name="Configure Extractor" id="3" enabled="true">
+      <command>cd Extractor; ./configure</command>
+      <arguments></arguments>
+      <timeout>0</timeout>
+      <expected_return_code>0</expected_return_code>
+      <expected_output></expected_output>
+      <stop_on_fail>true</stop_on_fail>
+    </run>
+    <run name="Install Extractor" id="4" enabled="true">
+      <command>cd Extractor; sudo -S make install</command>
+      <arguments></arguments>
+      <timeout>0</timeout>
+      <expected_return_code>0</expected_return_code>
+      <expected_output></expected_output>
+      <stop_on_fail>true</stop_on_fail>
+    </run>
+  </sequence>
+  <sequence name="" enabled="true">
+    <run name="Download libmicrohttpd" id="1" enabled="true">
+      <command>svn checkout</command>
+      <arguments>https://gnunet.org/svn/libmicrohttpd</arguments>
+      <timeout>0</timeout>
+      <expected_return_code>0</expected_return_code>
+      <expected_output></expected_output>
+      <stop_on_fail>true</stop_on_fail>
+    </run>
+    <run name="Bootstrap libmicrohttpd" id="2" enabled="true">
+      <command>cd libmicrohttpd; libtoolize; ./bootstrap</command>
+      <arguments></arguments>
+      <timeout>0</timeout>
+      <expected_return_code>0</expected_return_code>
+      <expected_output></expected_output>
+      <stop_on_fail>true</stop_on_fail>
+    </run>
+    <run name="Configure libmicrohttpd" id="3" enabled="true">
+      <command>cd libmicrohttpd; ./configure</command>
+      <arguments>--with-gnutls=/usr --enable-messages --enable-curl</arguments>
+      <timeout>0</timeout>
+      <expected_return_code>0</expected_return_code>
+      <expected_output></expected_output>
+      <stop_on_fail>true</stop_on_fail>
+    </run>
+    <run name="Install libmicrohttpd" id="4" enabled="true">
+      <command>cd libmicrohttpd; sudo -S make install</command>
+      <arguments></arguments>
+      <timeout>0</timeout>
+      <expected_return_code>0</expected_return_code>
+      <expected_output></expected_output>
+      <stop_on_fail>true</stop_on_fail>
+    </run>
+  </sequence>
+  <sequence name="" enabled="true">
+    <run name="Download GNUnet" id="1" enabled="true">
+      <command>svn checkout</command>
+      <arguments>https://gnunet.org/svn/gnunet</arguments>
+      <timeout>0</timeout>
+      <expected_return_code>0</expected_return_code>
+      <expected_output></expected_output>
+      <stop_on_fail>true</stop_on_fail>
+    </run>
+    <run name="Bootstrap GNUnet" id="2" enabled="true">
+      <command>cd gnunet; libtoolize; ./bootstrap</command>
+      <arguments></arguments>
+      <timeout>0</timeout>
+      <expected_return_code>0</expected_return_code>
+      <expected_output></expected_output>
+      <stop_on_fail>true</stop_on_fail>
+    </run>
+    <run name="Configure GNUnet" id="3" enabled="true">
+      <command>cd gnunet; ./configure</command>
+      <arguments>--with-extractor=/usr/local --with-gcrypt=/usr/local 
--with-mysql=/usr/lib/mysql --enable-logging=verbose</arguments>
+      <timeout>0</timeout>
+      <expected_return_code>0</expected_return_code>
+      <expected_output></expected_output>
+      <stop_on_fail>true</stop_on_fail>
+    </run>
+    <run name="Install GNUnet" id="4" enabled="true">
+      <command>cd gnunet; sudo -S make install</command>
+      <arguments></arguments>
+      <timeout>0</timeout>
+      <expected_return_code>0</expected_return_code>
+      <expected_output></expected_output>
+      <stop_on_fail>true</stop_on_fail>
+    </run>
+  </sequence>
+  <sequence name="" enabled="true">
+    <run name="Create GNUnet directory" id="1" enabled="true">
+      <command>mkdir .gnunet; touch .gnunet/gnunet.conf</command>
+      <arguments></arguments>
+      <timeout>0</timeout>
+      <expected_return_code>0</expected_return_code>
+      <expected_output></expected_output>
+      <stop_on_fail>true</stop_on_fail>
+    </run>
+    <run name="Set GNUNET_PREFIX" id="2" enabled="true">
+      <command>echo -e "export GNUNET_PREFIX=/usr/local\n" &gt;&gt; 
~/.bashrc</command>
+      <arguments></arguments>
+      <timeout>0</timeout>
+      <expected_return_code>0</expected_return_code>
+      <expected_output></expected_output>
+      <stop_on_fail>true</stop_on_fail>
+    </run>
+  </sequence>
+  <sequence name="Run ldconfig" enabled="true">
+    <run name="Run ldconfig" id="1" enabled="true">
+      <command>sudo -S ldconfig</command>
+      <arguments></arguments>
+      <timeout>0</timeout>
+      <expected_return_code>0</expected_return_code>
+      <expected_output></expected_output>
+      <stop_on_fail>true</stop_on_fail>
+    </run>
+  </sequence>
+</tasklist>