[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[GNUnet-SVN] [gnunet-texinfo] branch master updated: wrap lines of examp
From: |
gnunet |
Subject: |
[GNUnet-SVN] [gnunet-texinfo] branch master updated: wrap lines of examples for gnurl config. TODO: this should be defined once, so that it can be just called and only has to be edited once. The config options change over time. |
Date: |
Mon, 27 Mar 2017 16:41:49 +0200 |
This is an automated email from the git hooks/post-receive script.
ng0 pushed a commit to branch master
in repository gnunet-texinfo.
The following commit(s) were added to refs/heads/master by this push:
new 4b79215 wrap lines of examples for gnurl config. TODO: this should be
defined once, so that it can be just called and only has to be edited once. The
config options change over time.
4b79215 is described below
commit 4b79215962b92d0dc40c9bd9d2b444132b14f0a1
Author: ng0 <address@hidden>
AuthorDate: Fri Feb 17 16:58:19 2017 +0000
wrap lines of examples for gnurl config. TODO: this should be defined once,
so
that it can be just called and only has to be edited once. The config
options change over time.
---
installation.texi | 103 ++++++++++++++++++++++++++++++++++++++++--------------
1 file changed, 77 insertions(+), 26 deletions(-)
diff --git a/installation.texi b/installation.texi
index 7d22be1..70e1f4d 100644
--- a/installation.texi
+++ b/installation.texi
@@ -665,7 +665,11 @@ have problems, please report them.
@section Requirements
@node Requirements
-The Howto is based upon a @strong{Windows Server 2008 address@hidden
Installation, @strong{sbuild} and thus a @uref{http://www.mingw.org/wiki/MSYS,
MSYS+MinGW} (W32-GCC-Compiler-Suite + Unix-like Userland) installation. sbuild
is a convenient set of scripts which creates a working msys/mingw installation
and installs most dependencies required for GNUnet. }}
+The Howto is based upon a @strong{Windows Server 2008 address@hidden
+Installation, @strong{sbuild} and thus a @uref{http://www.mingw.org/wiki/MSYS,
+MSYS+MinGW} (W32-GCC-Compiler-Suite + Unix-like Userland) installation. sbuild
+is a convenient set of scripts which creates a working msys/mingw installation
+and installs most dependencies required for GNUnet. }}
As of the point of the creation of this Howto, GNUnet @strong{requires} a
Windows @strong{Server} 2003 or newer for full feature support. Windows Vista
@@ -905,15 +909,25 @@ pinning is correct: the upgrade step should cause no
changes at all.
We begin by installing a few Debian packages from stable:@
address@hidden@
-# apt-get install gcc make python-zbar libltdl-dev libsqlite3-dev
libunistring-dev libopus-dev libpulse-dev openssl libglpk-dev texlive
libidn11-dev libmysqlclient-dev libpq-dev libarchive-dev libbz2-dev
libexiv2-dev libflac-dev libgif-dev libglib2.0-dev libgtk-3-dev libmagic-dev
libjpeg8-dev libmpeg2-4-dev libmp4v2-dev librpm-dev libsmf-dev libtidy-dev
libtiff5-dev libvorbis-dev libogg-dev zlib1g-dev g++ gettext libgsf-1-dev
libunbound-dev libqrencode-dev libgladeui-dev nasm texlive-lat [...]
-}@
address@hidden
+# apt-get install gcc make python-zbar libltdl-dev libsqlite3-dev \
+ libunistring-dev libopus-dev libpulse-dev openssl libglpk-dev \
+ texlive libidn11-dev libmysqlclient-dev libpq-dev libarchive-dev \
+ libbz2-dev libexiv2-dev libflac-dev libgif-dev libglib2.0-dev \
+ libgtk-3-dev libmagic-dev libjpeg8-dev libmpeg2-4-dev libmp4v2-dev \
+ librpm-dev libsmf-dev libtidy-dev libtiff5-dev libvorbis-dev \
+ libogg-dev zlib1g-dev g++ gettext libgsf-1-dev libunbound-dev \
+ libqrencode-dev libgladeui-dev nasm texlive-latex-extra \
+ libunique-3.0-dev gawk miniupnpc libfuse-dev libbluetooth-dev
address@hidden example
After that, we install a few more packages from unstable:@
address@hidden@
-# apt-get install -t unstable nettle-dev libgstreamer1.0-dev
gstreamer1.0-plugins-base gstreamer1.0-plugins-good
libgstreamer-plugins-base1.0-dev@
-}
address@hidden
+# apt-get install -t unstable nettle-dev libgstreamer1.0-dev \
+ gstreamer1.0-plugins-base gstreamer1.0-plugins-good \
+ libgstreamer-plugins-base1.0-dev
address@hidden example
@node Installing Dependencies from Source
@section Installing Dependencies from Source
@@ -924,7 +938,7 @@ this as a "normal" user and only run the @code{make
install} steps as root
directory. We begin by downloading all dependencies, then extracting the
sources, and finally compiling and installing the libraries:@
address@hidden@
address@hidden
$ wget https://libav.org/releases/libav-9.10.tar.xz@
$ wget http://ftp.gnu.org/gnu/libextractor/libextractor-1.3.tar.gz@
$ wget ftp://ftp.gnupg.org/gcrypt/libgpg-error/libgpg-error-1.12.tar.bz2@
@@ -945,9 +959,15 @@ sources, and finally compiling and installing the
libraries:@
$ cd gnutls-3.2.7 ; ./configure ; make ; sudo make install ; cd ..@
$ cd libmicrohttpd-0.9.33; ./configure ; make ; sudo make install ; cd ..@
$ cd gnurl-7.34.0@
- $ ./configure --enable-ipv6 --with-gnutls=/usr/local --without-libssh2
--without-libmetalink --without-winidn --without-librtmp --without-nghttp2
--without-nss --without-cyassl --without-polarssl --without-ssl
--without-winssl --without-darwinssl --disable-sspi --disable-ntlm-wb
--disable-ldap --disable-rtsp --disable-dict --disable-telnet --disable-tftp
--disable-pop3 --disable-imap --disable-smtp --disable-gopher --disable-file
--disable-ftp@
+ $ ./configure --enable-ipv6 --with-gnutls=/usr/local --without-libssh2 \
+ --without-libmetalink --without-winidn --without-librtmp --without-nghttp2 \
+ --without-nss --without-cyassl --without-polarssl --without-ssl \
+ --without-winssl --without-darwinssl --disable-sspi --disable-ntlm-wb \
+ --disable-ldap --disable-rtsp --disable-dict --disable-telnet --disable-tftp
\
+ --disable-pop3 --disable-imap --disable-smtp --disable-gopher --disable-file
\
+ --disable-ftp@
$ make ; sudo make install; cd ..@
-}
address@hidden example
@section Installing GNUnet from Source
@node Installing GNUnet from Source
@@ -971,9 +991,11 @@ performance and Postgres better resillience.
Install the required dependencies@
address@hidden@
-$ sudo apt-get install libltdl-dev libgpg-error-dev libidn11-dev
libunistring-dev libglpk-dev libbluetooth-dev libextractor-dev
libmicrohttpd-dev libgnutls28-dev@
-}
address@hidden
+$ sudo apt-get install libltdl-dev libgpg-error-dev libidn11-dev \
+ libunistring-dev libglpk-dev libbluetooth-dev libextractor-dev \
+ libmicrohttpd-dev libgnutls28-dev
address@hidden example
Choose one or more database backends@
SQLite3@
@@ -1006,14 +1028,20 @@ For Ubuntu older 14.04:@
$ cd ..}
Install libgnurl@
address@hidden@
address@hidden
$ wget https://gnunet.org/sites/default/files/gnurl-7.35.0.tar.bz2@
$ tar xf gnurl-7.35.0.tar.bz2@
$ cd gnurl-7.35.0@
- $ ./configure --enable-ipv6 --with-gnutls --without-libssh2
--without-libmetalink --without-winidn --without-librtmp --without-nghttp2
--without-nss --without-cyassl --without-polarssl --without-ssl
--without-winssl --without-darwinssl --disable-sspi --disable-ntlm-wb
--disable-ldap --disable-rtsp --disable-dict --disable-telnet --disable-tftp
--disable-pop3 --disable-imap --disable-smtp --disable-gopher --disable-file
--disable-ftp@
+ $ ./configure --enable-ipv6 --with-gnutls --without-libssh2 \
+ --without-libmetalink --without-winidn --without-librtmp --without-nghttp2 \
+ --without-nss --without-cyassl --without-polarssl --without-ssl \
+ --without-winssl --without-darwinssl --disable-sspi --disable-ntlm-wb \
+ --disable-ldap --disable-rtsp --disable-dict --disable-telnet --disable-tftp \
+ --disable-pop3 --disable-imap --disable-smtp --disable-gopher --disable-file \
+ --disable-ftp@
$ sudo make install@
$ cd ..@
-}
address@hidden example
Install GNUnet@
@code{@
@@ -1058,9 +1086,11 @@ And finally you can start GNUnet with@
}
@strong{Install the required dependencies}
address@hidden@
- $ sudo apt-get install libltdl-dev libgpg-error-dev libidn11-dev
libunistring-dev libglpk-dev libbluetooth-dev libextractor-dev
libmicrohttpd-dev libgnutls28-dev@
-}
address@hidden
+$ sudo apt-get install libltdl-dev libgpg-error-dev libidn11-dev \
+ libunistring-dev libglpk-dev libbluetooth-dev libextractor-dev \
+ libmicrohttpd-dev libgnutls28-dev
address@hidden example
@strong{Choose one or more database backends}@
SQLite3@
@@ -1092,14 +1122,20 @@ And finally you can start GNUnet with@
$ sudo make install@
$ cd ..}@
@strong{Install libgnurl}@
address@hidden@
address@hidden
$ wget https://gnunet.org/sites/default/files/gnurl-7.35.0.tar.bz2@
$ tar xf gnurl-7.35.0.tar.bz2@
$ cd gnurl-7.35.0@
- $ ./configure --enable-ipv6 --with-gnutls --without-libssh2
--without-libmetalink --without-winidn --without-librtmp --without-nghttp2
--without-nss --without-cyassl --without-polarssl --without-ssl
--without-winssl --without-darwinssl --disable-sspi --disable-ntlm-wb
--disable-ldap --disable-rtsp --disable-dict --disable-telnet --disable-tftp
--disable-pop3 --disable-imap --disable-smtp --disable-gopher --disable-file
--disable-ftp@
+ $ ./configure --enable-ipv6 --with-gnutls --without-libssh2 \
+ --without-libmetalink --without-winidn --without-librtmp --without-nghttp2 \
+ --without-nss --without-cyassl --without-polarssl --without-ssl \
+ --without-winssl --without-darwinssl --disable-sspi --disable-ntlm-wb \
+ --disable-ldap --disable-rtsp --disable-dict --disable-telnet --disable-tftp \
+ --disable-pop3 --disable-imap --disable-smtp --disable-gopher --disable-file \
+ --disable-ftp
$ sudo make install@
$ cd ..@
-}
address@hidden example
@strong{Install GNUnet}@
@code{@
@@ -1177,9 +1213,18 @@ user.
@section Installing Packages
We begin by installing a few Debian packages from stable:@
address@hidden@
- # apt-get install gcc make python-zbar libltdl-dev libsqlite3-dev
libunistring-dev libopus-dev libpulse-dev openssl libglpk-dev texlive
libidn11-dev libmysqlclient-dev libpq-dev libarchive-dev libbz2-dev libflac-dev
libgif-dev libglib2.0-dev libgtk-3-dev libmpeg2-4-dev libtidy-dev libvorbis-dev
libogg-dev zlib1g-dev g++ gettext libgsf-1-dev libunbound-dev libqrencode-dev
libgladeui-dev nasm texlive-latex-extra libunique-3.0-dev gawk miniupnpc
libfuse-dev libbluetooth-dev gstreamer1.0-pl [...]
-}
address@hidden
+ # apt-get install gcc make python-zbar libltdl-dev libsqlite3-dev \
+ libunistring-dev libopus-dev libpulse-dev openssl libglpk-dev texlive \
+ libidn11-dev libmysqlclient-dev libpq-dev libarchive-dev libbz2-dev \
+ libflac-dev libgif-dev libglib2.0-dev libgtk-3-dev libmpeg2-4-dev \
+ libtidy-dev libvorbis-dev libogg-dev zlib1g-dev g++ gettext libgsf-1-dev \
+ libunbound-dev libqrencode-dev libgladeui-dev nasm texlive-latex-extra \
+ libunique-3.0-dev gawk miniupnpc libfuse-dev libbluetooth-dev \
+ gstreamer1.0-plugins-base gstreamer1.0-plugins-good \
+ libgstreamer-plugins-base1.0-dev nettle-dev libextractor-dev libgcrypt20-dev
\
+ libmicrohttpd-dev
address@hidden example
@node Installing Dependencies from Source
@section Installing Dependencies from Source
@@ -1202,7 +1247,13 @@ sources, and finally compiling and installing the
libraries:@
$ tar xvf gnurl-7.40.0.tar.bz2@
$ cd gnutls-3.3.12 ; ./configure ; make ; sudo make install ; cd ..@
$ cd gnurl-7.40.0@
- $ ./configure --enable-ipv6 --with-gnutls=/usr/local --without-libssh2
--without-libmetalink --without-winidn --without-librtmp --without-nghttp2
--without-nss --without-cyassl --without-polarssl --without-ssl
--without-winssl --without-darwinssl --disable-sspi --disable-ntlm-wb
--disable-ldap --disable-rtsp --disable-dict --disable-telnet --disable-tftp
--disable-pop3 --disable-imap --disable-smtp --disable-gopher --disable-file
--disable-ftp --disable-smb@
+ $ ./configure --enable-ipv6 --with-gnutls=/usr/local --without-libssh2 \
+ --without-libmetalink --without-winidn --without-librtmp --without-nghttp2 \
+ --without-nss --without-cyassl --without-polarssl --without-ssl \
+ --without-winssl --without-darwinssl --disable-sspi --disable-ntlm-wb \
+ --disable-ldap --disable-rtsp --disable-dict --disable-telnet --disable-tftp \
+ --disable-pop3 --disable-imap --disable-smtp --disable-gopher --disable-file \
+ --disable-ftp --disable-smb
$ make ; sudo make install; cd ..@
}
--
To stop receiving notification emails like this one, please contact
address@hidden
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- [GNUnet-SVN] [gnunet-texinfo] branch master updated: wrap lines of examples for gnurl config. TODO: this should be defined once, so that it can be just called and only has to be edited once. The config options change over time.,
gnunet <=