[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[GNUnet-SVN] [gnunet-fuse] branch master updated: refactor manpage
From: |
gnunet |
Subject: |
[GNUnet-SVN] [gnunet-fuse] branch master updated: refactor manpage |
Date: |
Mon, 08 Apr 2019 22:35:57 +0200 |
This is an automated email from the git hooks/post-receive script.
ng0 pushed a commit to branch master
in repository gnunet-fuse.
The following commit(s) were added to refs/heads/master by this push:
new 346b1fc refactor manpage
346b1fc is described below
commit 346b1fc78569d860e6e832b43ef1e3f0a40c074b
Author: ng0 <address@hidden>
AuthorDate: Mon Apr 8 20:35:48 2019 +0000
refactor manpage
---
doc/gnunet-fuse.1 | 106 ++++++++++++++++++++++++++++++++----------------------
1 file changed, 63 insertions(+), 43 deletions(-)
diff --git a/doc/gnunet-fuse.1 b/doc/gnunet-fuse.1
index 5c4fb24..2564b9a 100644
--- a/doc/gnunet-fuse.1
+++ b/doc/gnunet-fuse.1
@@ -1,43 +1,63 @@
-.TH gnunet\-fuse "1" "6 Jun 2012" "GNUnet"
-.SH NAME
-gnunet\-fuse \- mount directories shared on gnunet
-
-.SH SYNOPSIS
-.B gnunet\-fuse
-[\fIOPTIONS\fR]
-.SH DESCRIPTION
-.PP
-
-gnunet\-fuse is a tool to mount directories that have been published via
GNUnet's file\-sharing applications. With gnunet\-fuse, directories that have
been published on GNUnet can be mounted as read\-only file systems and the
accessed using normal file operations. In contrast to downloading the
directory recursively via gnunet\-download, this has the advantage that files
are downloaded on\-demand. Only those files (or directories) that you access
will be downloaded. Furthermore, in t [...]
-
-gnunet\-fuse will store all downloaded files in a temporary directory on disk.
This cache will be purged when gnunet\-fuse exits normally (which happens when
the file\-system is unmounted). As mounting a file system is a priviledged
operation, gnunet\-fuse must be run by root. If root is not in the 'gnunet'
group, access to the shared directory will likely fail as the
gnunet\-service\-fs will likely refuse access to root. This can be solved
either by adding root to the 'gnunet' group [...]
-
-.TP
-\fB\-c \fIFILENAME\fR, \fB\-\-config=FILENAME\fR
-configuration file to use
-.TP
-\fB\-d \fIPATH\fR, \fB\-\-directory=PATH\fR
-PATH specifies the mountpoint that gnunet\-fuse should use as the destination
for mounting the file system.
-.TP
-\fB\-h\fR, \fB\-\-help\fR
-print help page
-.TP
-\fB\-L \fILOGLEVEL\fR, \fB\-\-loglevel=LOGLEVEL\fR
-Change the loglevel. Possible values for LOGLEVEL are ERROR, WARNING, INFO
and DEBUG.
-.TP
-\fB\-s \fIURI\fR, \fB\-\-source=URI\fR
-URI is the file\-sharing URI of the directory that is to be mounted. It must
be either of type CHK or of type LOC.
-.TP
-\fB\-t\fR, \fB\-\-single-threaded\fR
-in this mode, gnunet\-fuse will run in "debug" mode and disable FUSE
concurrency (and add some additional logging). Normally, gnunet\-fuse will
download multiple files in parallel if multiple IO requests are queued with the
file system at the same time. In debug mode, all requests are processed
sequentially. Note that gnunet\-fuse will still fork a helper process to
perform the actual interaction with the GNUnet file\-sharing service.
-.TP
-\fB\-v\fR, \fB\-\-version\fR
-print the version number
-
-.SH NOTES
-gnunet\-fuse currently only supports read\-only operations on the file system.
All files will be owned by root and will be world-readable.
-
-.SH "REPORTING BUGS"
-Report bugs by using mantis <https://bugs.gnunet.org/> or by sending
electronic mail to <address@hidden>
-.SH "SEE ALSO"
-\fBgnunet\-publish\fP(1), \fBgnunet\-fs\-gtk\fP(1)
+.Dd June 6, 2012
+.Dt GNUNET-FUSE 1
+.Os
+.Sh NAME
+.Nm gnunet-fuse
+.Nd
+mount directories shared on gnunet
+.Sh SYNOPSIS
+.Nm
+.Op Fl c Ar FILENAME | Fl \-config= Ns Ar FILENAME
+.Op Fl d Ar PATH | Fl \-directory= Ns Ar PATH
+.Op Fl h | \-help
+.Op Fl L Ar LOGLEVEL | Fl \-loglevel= Ns Ar LOGLEVEL
+.Op Fl s Ar URI | Fl \-source= Ns Ar URI
+.Op Fl t | \-single-threaded
+.Op Fl v | \-version
+.Sh DESCRIPTION
+.Nm
+is a tool to mount directories that have been published via GNUnet's
file-sharing applications.
+With gnunet-fuse, directories that have been published on GNUnet can be
mounted as read-only file systems and the accessed using normal file operations.
+In contrast to downloading the directory recursively via gnunet-download, this
has the advantage that files are downloaded on-demand.
+Only those files (or directories) that you access will be downloaded.
+Furthermore, in the case of larger files, only those blocks that an
application actually reads will be downloaded.
+Naturally, operations on the file system will block until the download has
succeeded, which can theoretically mean that they never terminate and must be
aborted.
+.Pp
+gnunet-fuse will store all downloaded files in a temporary directory on disk.
+This cache will be purged when gnunet-fuse exits normally (which happens when
the file-system is unmounted).
+As mounting a file system is a priviledged operation, gnunet-fuse must be run
by root.
+If root is not in the 'gnunet' group, access to the shared directory will
likely fail as the gnunet-service-fs will likely refuse access to root.
+This can be solved either by adding root to the 'gnunet' group, or by
disabling the access control options for gnunet-service\-fs.
+.Pp
+gnunet-fuse currently only supports read-only operations on the file system.
+All files will be owned by root and will be world-readable.
+.Bl -tag -width Ds
+.It Fl c Ar FILENAME | Fl \-config= Ns Ar FILENAME
+Configuration file to use.
+.It Fl d Ar PATH | Fl \-directory= Ns Ar PATH
+PATH specifies the mountpoint that gnunet-fuse should use as the destination
for mounting the file system.
+.It Fl h | \-help
+Print the help page
+.It Fl L Ar LOGLEVEL | Fl \-loglevel= Ns Ar LOGLEVEL
+Change the loglevel.
+Possible values for LOGLEVEL are ERROR, WARNING, INFO and DEBUG.
+.It Fl s Ar URI | Fl \-source= Ns Ar URI
+URI is the file-sharing URI of the directory that is to be mounted.
+It must be either of type CHK or of type LOC.
+.It Fl t | \-single-threaded
+In this mode, gnunet-fuse will run in "debug" mode and disable FUSE
concurrency (and add some additional logging).
+Normally, gnunet-fuse will download multiple files in parallel if multiple IO
requests are queued with the file system at the same time.
+In debug mode, all requests are processed sequentially.
+Note that gnunet-fuse will still fork a helper process to perform the actual
interaction with the GNUnet file-sharing service.
+.It Fl v | \-version
+Print the version number.
+.El
+.\".Sh EXAMPLES
+.Sh SEE ALSO
+.Xr gnunet-publish 1 ,
+.Xr gnunet-fs-gtk 1
+.Sh BUGS
+Report bugs by using
+.Lk https://bugs.gnunet.org
+or by sending electronic mail to
+.Aq Mt address@hidden .
--
To stop receiving notification emails like this one, please contact
address@hidden
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- [GNUnet-SVN] [gnunet-fuse] branch master updated: refactor manpage,
gnunet <=