[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[gpsd-users] GBS sentence being output by u-blox despite being explicitl
From: |
Michael Procca |
Subject: |
[gpsd-users] GBS sentence being output by u-blox despite being explicitly disabled |
Date: |
Wed, 07 Nov 2012 18:27:24 -0000 |
User-agent: |
Mozilla/5.0 (X11; Linux i686; rv:16.0) Gecko/20121026 Thunderbird/16.0.2 |
In my start up script, I explicitly disable GBS sentences with the
following:
echo -ne '$PUBX,40,GBS,0,0,0,0,0,0*4D\r\n' | socat stdin
open:/dev/ttyS3,b9600,raw
And later start gpsd as follows:
/usr/sbin/gpsd /dev/ttyS3
but GBS sentences are still output by u-blox AMY 5 chip.
However, if I use the -b option:
/usr/sbin/gpsd -b /dev/ttyS3
Then GBS sentences are never output.
According to u-blox support, GBS sentences are disabled by default and I
have searched through the gpsd source code (gpsd-2.96) and cannot find a
UBX,40 message enabling GBS nor a UBX-CFG-MSG. I've read on the FAQ of
some devices going catatonic unless the -b option is used - though it
might be a stretch for it to trigger enabling of GBS.
Has anybody else had this problem and know why the -b option solves it?
<html>
<body>
Michael Procca Software Developer Iders Incorporated 27047 Oakwood Road
Oakbank, MB R0E 1J2 Tel: (204) 444-5200 ext 240 Fax: (204) 444-5900
[http://www.iders.ca/IDERS_logo.jpg] ________________________________ Iders
Incorporated Confidential: ________________________________
This message is intended solely for the use of the designated recipient(s) and
their appointed delegates, and may contain confidential information. Any
unauthorized disclosure, copying or distribution of its contents is strictly
prohibited. If you have received
this message in error, please destroy it and advise the sender immediately by
phone, Email or facsimile.
</body>
</html>
- [gpsd-users] GBS sentence being output by u-blox despite being explicitly disabled,
Michael Procca <=