[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [gpsd-users] Galileo
From: |
Gary E. Miller |
Subject: |
Re: [gpsd-users] Galileo |
Date: |
Mon, 5 Mar 2018 19:25:39 -0800 |
Yo Mike!
By default, u-blox devices usually have GALILEO turned off. I thik all the
8 series can for GALILEO, but some vendors do lock it out.
On Sun, 4 Mar 2018 20:18:05 +0000
Mike Tubby <address@hidden> wrote:
> Aimee,
>
> Which Ublox-8 receiver is it, eg. MAX-M8W, etc. and which firmware
> does it have?
>
> Some Ublox receivers come up with GPS+Glonass enabled and can only
> handle 2 or 3 out of the four constellations and need an init string
> to change which ones they use - it might be that GPSD doesn't do this
> for your model...
>
> Mike
>
>
> On 3/4/2018 3:14 PM, aimdev wrote:
> > Hi
> > I have a gpsd running, latest from the git, with a listener showing
> > the SV’s. The gps is a u-blox 8 device.
> > I have received gps, glonass and sbas, but no Galileo, however
> > using the u-blox program I see Galileo OK. Does gpsd support
> > Galileo?
> >
> > Thanks
> >
> > Aimee
> >
> >
>
>
RGDS
GARY
---------------------------------------------------------------------------
Gary E. Miller Rellim 109 NW Wilmington Ave., Suite E, Bend, OR 97703
address@hidden Tel:+1 541 382 8588
Veritas liberabit vos. -- Quid est veritas?
"If you can’t measure it, you can’t improve it." - Lord Kelvin
pgpq9W1afRFG2.pgp
Description: OpenPGP digital signature