I plugged in my old-er card, from the last build done a couple
of weeks before esr updated the HOW-TO and ran a quick ntpq -p
address@hidden:~ $ ntpq -p
remote refid
st t when poll reach delay offset jitter
=======================================================================================================
*SHM(1) .PPS.
0 l 42 64 177 0.0000 -0.8206 3.9829
us.pool.ntp.org .POOL.
16 p - 256 0 0.0000 0.0000 0.0010
xSHM(0) .GPS.
0 l 40 64 177 0.0000 -108.458 4.3226
-ntp2.wiktel.com 212.215.1.157
2 u 6 64 177 97.7693 -9.0044 5.5697
-mtpbx.cytranet.net 184.105.182.7
3 u 7 64 177 22.8619 0.2191 6.1801
-ns3.weiszhosting.com 128.138.141.172
2 u 12 64 177 39.0367 1.0615 5.1287
-satellite.gensonline.eu 131.188.3.222
2 u 13 64 177 89.9446 0.8117 5.9528
+static-96-244-96-19.bltmmd.fios.verizon 192.168.10.254
2 u 63 64 177 85.6073 0.1642 5.1297
+107.181.191.189 204.48.58.50
2 u 58 64 177 42.2908 1.6339 4.6068
+freemont.nerdboy.net.au 216.218.192.202
2 u 1 64 377 35.2315 8.9076 9.5123
+rolex.netservicesgroup.com .kPPS.
1 u - 64 247 75.9353 3.3734 3.9998
address@hidden:~ $ ntpq -p
remote refid
st t when poll reach delay offset jitter
=======================================================================================================
*SHM(1) .PPS.
0 l 63 64 377 0.0000 1.3021 5.6783
us.pool.ntp.org .POOL.
16 p - 256 0 0.0000 0.0000 0.0010
xSHM(0) .GPS.
0 l 61 64 377 0.0000 -106.269 5.6592
-ntp2.wiktel.com 212.215.1.157
2 u 25 64 377 97.1405 -8.9610 5.0565
-mtpbx.cytranet.net 184.105.182.7
3 u 25 64 377 22.5673 0.1619 5.6160
+ns3.weiszhosting.com 128.138.141.172
2 u 32 64 377 37.2547 1.3160 4.8789
-satellite.gensonline.eu 131.188.3.222
2 u 35 64 377 89.4951 0.6370 5.2913
+static-96-244-96-19.bltmmd.fios.verizon 192.168.10.254
2 u 25 64 377 78.6305 0.7874 5.4595
-107.181.191.189 204.48.58.50
2 u 17 64 377 46.0618 5.0680 7.5651
-freemont.nerdboy.net.au 216.218.192.202
2 u 19 64 377 26.6776 5.4569 6.1395
+rolex.netservicesgroup.com .kPPS.
1 u 18 64 117 74.9587 2.3430 3.2152
I have not given it any time to settle down here just booted and
ran the test almost immediately.....just wanted to see I was
getting something....
Looks like my hardware is at least good
ok.....functioning.....!!!
address@hidden:~ $ ntpq -p
remote refid st t when
poll reach delay offset jitter
=======================================================================================================
*SHM(1) .PPS.
0 l 49 64 377 0.0000 2.4271 1.6227
us.pool.ntp.org .POOL.
16 p - 256 0 0.0000 0.0000 0.0010
xSHM(0) .GPS.
0 l 47 64 377 0.0000 -106.249 1.1025
-mtpbx.cytranet.net 184.105.182.7
3 u 56 64 377 21.9226 -3.6659 4.1190
-ns3.weiszhosting.com 128.138.141.172
2 u 62 64 373 36.4499 -1.9383 3.6808
-satellite.gensonline.eu 131.188.3.222
2 u 55 64 377 87.9018 1.6508 1.8768
-static-96-244-96-19.bltmmd.fios.verizon 192.168.10.254
2 u 45 64 377 78.6305 0.7874 5.8603
+107.181.191.189 204.48.58.50
2 u 35 64 377 38.4572 2.8985 2.0789
-freemont.nerdboy.net.au 216.218.192.202
2 u 45 64 377 23.6999 5.6405 1.9319
+rolex.netservicesgroup.com .kPPS.
1 u 45 64 347 74.9587 2.3430 3.3153
address@hidden:~ $ date
Thu Jul 26 11:04:32 PDT 2018
And it was in fact 11:04 am so not bad for the PI not being in
active service for a couple of weeks and that card being in the PI
and active for only about 2-3 mins......
This makes me happy....!!! (I will be dd-ing this card later)
cloning it....not erasing it.....
address@hidden:~ $ ntpq -p
remote refid
st t when poll reach delay offset jitter
=======================================================================================================
*SHM(1) .PPS.
0 l 57 64 377 0.0000 3.3054 0.9353
us.pool.ntp.org .POOL.
16 p - 256 0 0.0000 0.0000 0.0010
xSHM(0) .GPS.
0 l 55 64 377 0.0000 -107.792 1.7560
-mtpbx.cytranet.net 184.105.182.7
3 u 47 64 377 21.8866 1.9984 1.8190
+ns3.weiszhosting.com 128.138.141.172
2 u 54 64 177 36.7879 3.0451 1.2325
-satellite.gensonline.eu 131.188.3.222
2 u 52 64 377 87.9018 1.6508 1.8458
+static-96-244-96-19.bltmmd.fios.verizon 192.168.10.254
2 u 48 64 377 79.1028 3.3255 6.9386
-107.181.191.189 204.48.58.50
2 u 36 64 377 38.4572 2.8985 2.6602
-freemont.nerdboy.net.au 216.218.192.202
2 u 50 64 377 23.3875 5.7857 1.0063
+rolex.netservicesgroup.com .kPPS.
1 u 48 64 377 75.6849 4.6545 1.2790
address@hidden:~ $ date
Thu Jul 26 11:10:14 PDT 2018
address@hidden:~ $
So now im going to zero out a card and start the new HOW-TO fresh
and see where I end up....
Why is the "POOL" showing up where it is.....?
Alan
On 07/25/2018 08:19 PM, Alan Scott
wrote:
Hey Gary:
I did another install, FRESH from the factory micro SD Card
formated ddimage per the instructions, install failed @ same
place as before, All of that data is on my other laptop, in
Burbank....(I know....not helping....) will repeat again tonight
and post results.....Located one of my old cards from the
previous build that DID work, will run that first to eliminate
any equipment malfunctions as cause......
Thanks for keeping up the effort(s)....
Alan
On 07/23/2018 08:53 PM, Alan Scott
wrote:
-------- Forwarded Message --------
OMG.....I NEVER NOTICED A SPACE THERE.....!!!!!!
I truly thought you had gone "round the bend" I will try later and
verify.......gezzzzz
On 07/22/2018 10:28 AM, Gary E. Miller wrote:
> Yo Alan!
>
> On Sat, 21 Jul 2018 22:44:52 -0700
> Alan Scott <address@hidden> wrote:
>
>> address@hidden:~ $ *su-*
>> *-bash: su-: command not found*
>> address@hidden:~ $
>>
>> So can we put this one to bed now and be done with it "su-" does not
>> work in raspbian..... What works "sudo su" Your wellcome
> Uh? Say what? You forgot the space between "su" and the "-".
>
> RTFM.
>
> RGDS
> GARY
> ---------------------------------------------------------------------------
> Gary E. Miller Rellim 109 NW Wilmington Ave., Suite E, Bend, OR 97703
> address@hidden Tel:+1 541 382 8588
>
> Veritas liberabit vos. -- Quid est veritas?
> "If you can’t measure it, you can’t improve it." - Lord Kelvin