Hi,
I am closely following the development on git so I may be a tad bit early with my question.
I try to use the ntrip:// functionality of gpsd to send correction data to the f9p. My gps board has a led which turns off when the gps is able to use the correction data. With u-center I have tested that the ntrip login data I provide give rtk solution. (the no-rtk led turns off). So far the led does not go off with gpsd.
I guess the f9p is using some very new rtcm sentences and I wonder if these are compiled into the rtcm3 driver of gpsd or if they can be configured in some way. I also wonder if there is a way to see in any log that rtcm is actually fetched from the caster and provided to the gps attached to gpsd.
--
Svenn