[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Using grub on fuloong 6004
From: |
David Kuehling |
Subject: |
Re: Using grub on fuloong 6004 |
Date: |
Sun, 24 Jul 2011 12:54:40 +0200 |
User-agent: |
Gnus/5.13 (Gnus v5.13) Emacs/23.2 (gnu/linux) |
>>>>> "Vladimir" == Vladimir 'φ-coder/phcoder' Serbinenko <address@hidden>
>>>>> writes:
> On 23.07.2011 15:11, David Kuehling wrote:
>>>>>>> "Vladimir" == Vladimir 'φ-coder/phcoder' Serbinenko
>>>>>>> <address@hidden> writes:
>>>> sudo grub-mkimage --config=/boot/grub.elf.conf \
>>>> --output=/boot/grub3.elf --format=mipsel-fuloong-elf --verbose \
>>>> ata part_msdos ext2 reboot halt lspci ohci usbtest usbms linux \
>>>> fat xfs part_gpt multiboot2 minicmd configfile gcry_md5 hashsum
>>>>
>>> ata was renamed to pata.
>> Just recreated my grub.elf with ata in the grub.elf.conf replaced by
>> pata, plus 'pata' module added to the grub-mkimage command line.
>>
>> Now the grub blanks the screen and hangs when loaded from pmon.
>>
> I've fixed 2 regressions in trunk.
>> Maybe I should add that I'm using a 750GB hard-disk with 4k sectors
>> in my Fuloong. Could that be a problem? It's neigher a problem for
>> pmon nor for linux, though.
> I'm attaching a patch which should add the support for 4K sectors with
> ATA.
Ok, I tried the new trunk, once with your patch and once without it.
Now grub comes up and displays a prompt, but not a menu. Keyboard
doesn't work however, so I cannot do anything with grub yet.
I tried to re-run grub-mkimage with module 'usb_keyboard' and 'ahci'
added, but that didn't help, keyboard still not working:
sudo grub-mkimage --config=/boot/grub.elf.conf
--output=/boot/grub4-4k.elf --format=mipsel-fuloong-elf --verbose ata
pata part_msdos ext2 reboot halt lspci ohci ahci usbtest usbms linux fat
xfs part_gpt multiboot2 minicmd configfile gcry_md5 hashsum usb_keyboard
grub.elf.conf:
set root=pata0,msdos1
set prefix=($root)/grub
I also ran 'grub-install' once, which put a full set of grub modules to
/boot/grub. However, it failed to generate a grub image and complained:
$ sudo /usr/local/sbin/grub-install
/usr/local/bin/grub-mkimage: error: cannot stat
/usr/local/lib/grub/mipsel-loongson/uhci.mod.
according to lsusb, my keyboard is a
Bus 002 Device 003: ID 0b51:0020 Comfort Keyboard Co. Comfort Keyboard
, connected to the top-right usb slot. Other than that only a usb-mouse
is also connected. No hubs or other advanced usb-hardware.
Any ideas what's wrong now?
cheers,
David
--
GnuPG public key: http://dvdkhlng.users.sourceforge.net/dk.gpg
Fingerprint: B17A DC95 D293 657B 4205 D016 7DEF 5323 C174 7D40
pgphSgKxS94lU.pgp
Description: PGP signature
- Using grub on fuloong 6004, David Kuehling, 2011/07/23
- Re: Using grub on fuloong 6004, Vladimir 'φ-coder/phcoder' Serbinenko, 2011/07/23
- Re: Using grub on fuloong 6004, David Kuehling, 2011/07/23
- Re: Using grub on fuloong 6004, Vladimir 'φ-coder/phcoder' Serbinenko, 2011/07/23
- Re: Using grub on fuloong 6004, Vladimir 'φ-coder/phcoder' Serbinenko, 2011/07/23
- Re: Using grub on fuloong 6004,
David Kuehling <=
- Re: Using grub on fuloong 6004, Vladimir 'φ-coder/phcoder' Serbinenko, 2011/07/24
- Re: Using grub on fuloong 6004, David Kuehling, 2011/07/24
- Re: Using grub on fuloong 6004, Vladimir 'φ-coder/phcoder' Serbinenko, 2011/07/24
- Re: Using grub on fuloong 6004, David Kuehling, 2011/07/25