[Gsrc-commit] trunk r2443: add teximpatient at 2.3

[Brandon Invergo]

------------------------------------------------------------
revno: 2443
revision-id: address@hidden
parent: address@hidden
committer: Brandon Invergo <address@hidden>
branch nick: trunk
timestamp: Tue 2013-07-02 20:52:24 +0200
message:
  add teximpatient at 2.3
added:
  gnu/teximpatient/              teximpatient-20130702185145-vcepc03yxqgpvuk0-1
  gnu/teximpatient/Makefile      makefile-20130702185145-vcepc03yxqgpvuk0-2
  gnu/teximpatient/config.mk     config.mk-20130702185145-vcepc03yxqgpvuk0-4
  gnu/teximpatient/files/        files-20130702185145-vcepc03yxqgpvuk0-6
  gnu/teximpatient/files/install-sh installsh-20130702185145-vcepc03yxqgpvuk0-7
  gnu/teximpatient/gpg-keyring   gpgkeyring-20130702185145-vcepc03yxqgpvuk0-5
  gnu/teximpatient/sha256sums    sha256sums-20130702185145-vcepc03yxqgpvuk0-3

=== added directory 'gnu/teximpatient'
=== added file 'gnu/teximpatient/Makefile'
--- a/gnu/teximpatient/Makefile 1970-01-01 00:00:00 +0000
+++ b/gnu/teximpatient/Makefile 2013-07-02 18:52:24 +0000
@@ -0,0 +1,44 @@
+# Copyright © 2013 Brandon Invergo <address@hidden>
+#
+# This file is part of GSRC.
+#
+# GSRC is free software: you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# GSRC is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+# or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public
+# License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GSRC.  If not, see <http://www.gnu.org/licenses/>.
+
+NAME = TeX for the Impatient
+GARNAME = teximpatient
+GARVERSION = 2.3
+HOME_URL = http://www.gnu.org/software/teximpatient/
+DESCRIPTION = Book on TeX, plain TeX and Eplain
+define BLURB
+TeX for the Impatient is a ~350 page book on TeX, plain TeX and
+Eplain, written by Paul Abrahams, Kathryn Hargreaves and Karl Berry.
+endef
+
+######################################################################
+
+MASTER_SITES = $(MASTER_GNU)
+MASTER_SUBDIR = $(GARNAME)/
+DISTFILES = $(DISTNAME).tar.gz install-sh
+SIGFILES = $(DISTNAME).tar.gz.sig
+EXTRACTDIR = $(WORKSRC)
+
+BUILDDEPS = texlive
+LIBDEPS =
+
+######################################################################
+
+include ../../gar.lib/auto.mk
+include config.mk
+
+

=== added file 'gnu/teximpatient/config.mk'
--- a/gnu/teximpatient/config.mk        1970-01-01 00:00:00 +0000
+++ b/gnu/teximpatient/config.mk        2013-07-02 18:52:24 +0000
@@ -0,0 +1,4 @@
+## Configuration options for teximpatient ##
+
+CONFIGURE_OPTS ?= 
+BUILD_OPTS ?=

=== added directory 'gnu/teximpatient/files'
=== added file 'gnu/teximpatient/files/install-sh'
--- a/gnu/teximpatient/files/install-sh 1970-01-01 00:00:00 +0000
+++ b/gnu/teximpatient/files/install-sh 2013-07-02 18:52:24 +0000
@@ -0,0 +1,527 @@
+#!/bin/sh
+# install - install a program, script, or datafile
+
+scriptversion=2011-11-20.07; # UTC
+
+# This originates from X11R5 (mit/util/scripts/install.sh), which was
+# later released in X11R6 (xc/config/util/install.sh) with the
+# following copyright and license.
+#
+# Copyright (C) 1994 X Consortium
+#
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documentation files (the "Software"), to
+# deal in the Software without restriction, including without limitation the
+# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
+# sell copies of the Software, and to permit persons to whom the Software is
+# furnished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL THE
+# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
+# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
+# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+#
+# Except as contained in this notice, the name of the X Consortium shall not
+# be used in advertising or otherwise to promote the sale, use or other deal-
+# ings in this Software without prior written authorization from the X Consor-
+# tium.
+#
+#
+# FSF changes to this file are in the public domain.
+#
+# Calling this script install-sh is preferred over install.sh, to prevent
+# 'make' implicit rules from creating a file called install from it
+# when there is no Makefile.
+#
+# This script is compatible with the BSD install script, but was written
+# from scratch.
+
+nl='
+'
+IFS=" ""       $nl"
+
+# set DOITPROG to echo to test this script
+
+# Don't use :- since 4.3BSD and earlier shells don't like it.
+doit=${DOITPROG-}
+if test -z "$doit"; then
+  doit_exec=exec
+else
+  doit_exec=$doit
+fi
+
+# Put in absolute file names if you don't have them in your path;
+# or use environment vars.
+
+chgrpprog=${CHGRPPROG-chgrp}
+chmodprog=${CHMODPROG-chmod}
+chownprog=${CHOWNPROG-chown}
+cmpprog=${CMPPROG-cmp}
+cpprog=${CPPROG-cp}
+mkdirprog=${MKDIRPROG-mkdir}
+mvprog=${MVPROG-mv}
+rmprog=${RMPROG-rm}
+stripprog=${STRIPPROG-strip}
+
+posix_glob='?'
+initialize_posix_glob='
+  test "$posix_glob" != "?" || {
+    if (set -f) 2>/dev/null; then
+      posix_glob=
+    else
+      posix_glob=:
+    fi
+  }
+'
+
+posix_mkdir=
+
+# Desired mode of installed file.
+mode=0755
+
+chgrpcmd=
+chmodcmd=$chmodprog
+chowncmd=
+mvcmd=$mvprog
+rmcmd="$rmprog -f"
+stripcmd=
+
+src=
+dst=
+dir_arg=
+dst_arg=
+
+copy_on_change=false
+no_target_directory=
+
+usage="\
+Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
+   or: $0 [OPTION]... SRCFILES... DIRECTORY
+   or: $0 [OPTION]... -t DIRECTORY SRCFILES...
+   or: $0 [OPTION]... -d DIRECTORIES...
+
+In the 1st form, copy SRCFILE to DSTFILE.
+In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
+In the 4th, create DIRECTORIES.
+
+Options:
+     --help     display this help and exit.
+     --version  display version info and exit.
+
+  -c            (ignored)
+  -C            install only if different (preserve the last data modification 
time)
+  -d            create directories instead of installing files.
+  -g GROUP      $chgrpprog installed files to GROUP.
+  -m MODE       $chmodprog installed files to MODE.
+  -o USER       $chownprog installed files to USER.
+  -s            $stripprog installed files.
+  -t DIRECTORY  install into DIRECTORY.
+  -T            report an error if DSTFILE is a directory.
+
+Environment variables override the default commands:
+  CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG
+  RMPROG STRIPPROG
+"
+
+while test $# -ne 0; do
+  case $1 in
+    -c) ;;
+
+    -C) copy_on_change=true;;
+
+    -d) dir_arg=true;;
+
+    -g) chgrpcmd="$chgrpprog $2"
+       shift;;
+
+    --help) echo "$usage"; exit $?;;
+
+    -m) mode=$2
+       case $mode in
+         *' '* | *'    '* | *'
+'*       | *'*'* | *'?'* | *'['*)
+           echo "$0: invalid mode: $mode" >&2
+           exit 1;;
+       esac
+       shift;;
+
+    -o) chowncmd="$chownprog $2"
+       shift;;
+
+    -s) stripcmd=$stripprog;;
+
+    -t) dst_arg=$2
+       # Protect names problematic for 'test' and other utilities.
+       case $dst_arg in
+         -* | [=\(\)!]) dst_arg=./$dst_arg;;
+       esac
+       shift;;
+
+    -T) no_target_directory=true;;
+
+    --version) echo "$0 $scriptversion"; exit $?;;
+
+    --)        shift
+       break;;
+
+    -*)        echo "$0: invalid option: $1" >&2
+       exit 1;;
+
+    *)  break;;
+  esac
+  shift
+done
+
+if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
+  # When -d is used, all remaining arguments are directories to create.
+  # When -t is used, the destination is already specified.
+  # Otherwise, the last argument is the destination.  Remove it from 
address@hidden
+  for arg
+  do
+    if test -n "$dst_arg"; then
+      # $@ is not empty: it contains at least $arg.
+      set fnord "$@" "$dst_arg"
+      shift # fnord
+    fi
+    shift # arg
+    dst_arg=$arg
+    # Protect names problematic for 'test' and other utilities.
+    case $dst_arg in
+      -* | [=\(\)!]) dst_arg=./$dst_arg;;
+    esac
+  done
+fi
+
+if test $# -eq 0; then
+  if test -z "$dir_arg"; then
+    echo "$0: no input file specified." >&2
+    exit 1
+  fi
+  # It's OK to call 'install-sh -d' without argument.
+  # This can happen when creating conditional directories.
+  exit 0
+fi
+
+if test -z "$dir_arg"; then
+  do_exit='(exit $ret); exit $ret'
+  trap "ret=129; $do_exit" 1
+  trap "ret=130; $do_exit" 2
+  trap "ret=141; $do_exit" 13
+  trap "ret=143; $do_exit" 15
+
+  # Set umask so as not to create temps with too-generous modes.
+  # However, 'strip' requires both read and write access to temps.
+  case $mode in
+    # Optimize common cases.
+    *644) cp_umask=133;;
+    *755) cp_umask=22;;
+
+    *[0-7])
+      if test -z "$stripcmd"; then
+       u_plus_rw=
+      else
+       u_plus_rw='% 200'
+      fi
+      cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
+    *)
+      if test -z "$stripcmd"; then
+       u_plus_rw=
+      else
+       u_plus_rw=,u+rw
+      fi
+      cp_umask=$mode$u_plus_rw;;
+  esac
+fi
+
+for src
+do
+  # Protect names problematic for 'test' and other utilities.
+  case $src in
+    -* | [=\(\)!]) src=./$src;;
+  esac
+
+  if test -n "$dir_arg"; then
+    dst=$src
+    dstdir=$dst
+    test -d "$dstdir"
+    dstdir_status=$?
+  else
+
+    # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
+    # might cause directories to be created, which would be especially bad
+    # if $src (and thus $dsttmp) contains '*'.
+    if test ! -f "$src" && test ! -d "$src"; then
+      echo "$0: $src does not exist." >&2
+      exit 1
+    fi
+
+    if test -z "$dst_arg"; then
+      echo "$0: no destination specified." >&2
+      exit 1
+    fi
+    dst=$dst_arg
+
+    # If destination is a directory, append the input filename; won't work
+    # if double slashes aren't ignored.
+    if test -d "$dst"; then
+      if test -n "$no_target_directory"; then
+       echo "$0: $dst_arg: Is a directory" >&2
+       exit 1
+      fi
+      dstdir=$dst
+      dst=$dstdir/`basename "$src"`
+      dstdir_status=0
+    else
+      # Prefer dirname, but fall back on a substitute if dirname fails.
+      dstdir=`
+       (dirname "$dst") 2>/dev/null ||
+       expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+            X"$dst" : 'X\(//\)[^/]' \| \
+            X"$dst" : 'X\(//\)$' \| \
+            X"$dst" : 'X\(/\)' \| . 2>/dev/null ||
+       echo X"$dst" |
+           sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+                  s//\1/
+                  q
+                }
+                /^X\(\/\/\)[^/].*/{
+                  s//\1/
+                  q
+                }
+                /^X\(\/\/\)$/{
+                  s//\1/
+                  q
+                }
+                /^X\(\/\).*/{
+                  s//\1/
+                  q
+                }
+                s/.*/./; q'
+      `
+
+      test -d "$dstdir"
+      dstdir_status=$?
+    fi
+  fi
+
+  obsolete_mkdir_used=false
+
+  if test $dstdir_status != 0; then
+    case $posix_mkdir in
+      '')
+       # Create intermediate dirs using mode 755 as modified by the umask.
+       # This is like FreeBSD 'install' as of 1997-10-28.
+       umask=`umask`
+       case $stripcmd.$umask in
+         # Optimize common cases.
+         *[2367][2367]) mkdir_umask=$umask;;
+         .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
+
+         *[0-7])
+           mkdir_umask=`expr $umask + 22 \
+             - $umask % 100 % 40 + $umask % 20 \
+             - $umask % 10 % 4 + $umask % 2
+           `;;
+         *) mkdir_umask=$umask,go-w;;
+       esac
+
+       # With -d, create the new directory with the user-specified mode.
+       # Otherwise, rely on $mkdir_umask.
+       if test -n "$dir_arg"; then
+         mkdir_mode=-m$mode
+       else
+         mkdir_mode=
+       fi
+
+       posix_mkdir=false
+       case $umask in
+         *[123567][0-7][0-7])
+           # POSIX mkdir -p sets u+wx bits regardless of umask, which
+           # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
+           ;;
+         *)
+           tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
+           trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
+
+           if (umask $mkdir_umask &&
+               exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
+           then
+             if test -z "$dir_arg" || {
+                  # Check for POSIX incompatibilities with -m.
+                  # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
+                  # other-writable bit of parent directory when it shouldn't.
+                  # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
+                  ls_ld_tmpdir=`ls -ld "$tmpdir"`
+                  case $ls_ld_tmpdir in
+                    d????-?r-*) different_mode=700;;
+                    d????-?--*) different_mode=755;;
+                    *) false;;
+                  esac &&
+                  $mkdirprog -m$different_mode -p -- "$tmpdir" && {
+                    ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
+                    test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
+                  }
+                }
+             then posix_mkdir=:
+             fi
+             rmdir "$tmpdir/d" "$tmpdir"
+           else
+             # Remove any dirs left behind by ancient mkdir implementations.
+             rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
+           fi
+           trap '' 0;;
+       esac;;
+    esac
+
+    if
+      $posix_mkdir && (
+       umask $mkdir_umask &&
+       $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
+      )
+    then :
+    else
+
+      # The umask is ridiculous, or mkdir does not conform to POSIX,
+      # or it failed possibly due to a race condition.  Create the
+      # directory the slow way, step by step, checking for races as we go.
+
+      case $dstdir in
+       /*) prefix='/';;
+       [-=\(\)!]*) prefix='./';;
+       *)  prefix='';;
+      esac
+
+      eval "$initialize_posix_glob"
+
+      oIFS=$IFS
+      IFS=/
+      $posix_glob set -f
+      set fnord $dstdir
+      shift
+      $posix_glob set +f
+      IFS=$oIFS
+
+      prefixes=
+
+      for d
+      do
+       test X"$d" = X && continue
+
+       prefix=$prefix$d
+       if test -d "$prefix"; then
+         prefixes=
+       else
+         if $posix_mkdir; then
+           (umask=$mkdir_umask &&
+            $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
+           # Don't fail if two instances are running concurrently.
+           test -d "$prefix" || exit 1
+         else
+           case $prefix in
+             *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
+             *) qprefix=$prefix;;
+           esac
+           prefixes="$prefixes '$qprefix'"
+         fi
+       fi
+       prefix=$prefix/
+      done
+
+      if test -n "$prefixes"; then
+       # Don't fail if two instances are running concurrently.
+       (umask $mkdir_umask &&
+        eval "\$doit_exec \$mkdirprog $prefixes") ||
+         test -d "$dstdir" || exit 1
+       obsolete_mkdir_used=true
+      fi
+    fi
+  fi
+
+  if test -n "$dir_arg"; then
+    { test -z "$chowncmd" || $doit $chowncmd "$dst"; } &&
+    { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } &&
+    { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false ||
+      test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1
+  else
+
+    # Make a couple of temp file names in the proper directory.
+    dsttmp=$dstdir/_inst.$$_
+    rmtmp=$dstdir/_rm.$$_
+
+    # Trap to clean up those temp files at exit.
+    trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
+
+    # Copy the file name to the temp name.
+    (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") &&
+
+    # and set any options; do chmod last to preserve setuid bits.
+    #
+    # If any of these fail, we abort the whole thing.  If we want to
+    # ignore errors from any of these, just make sure not to ignore
+    # errors from the above "$doit $cpprog $src $dsttmp" command.
+    #
+    { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } &&
+    { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } &&
+    { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } &&
+    { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
+
+    # If -C, don't bother to copy if it wouldn't change the file.
+    if $copy_on_change &&
+       old=`LC_ALL=C ls -dlL "$dst"    2>/dev/null` &&
+       new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` &&
+
+       eval "$initialize_posix_glob" &&
+       $posix_glob set -f &&
+       set X $old && old=:$2:$4:$5:$6 &&
+       set X $new && new=:$2:$4:$5:$6 &&
+       $posix_glob set +f &&
+
+       test "$old" = "$new" &&
+       $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1
+    then
+      rm -f "$dsttmp"
+    else
+      # Rename the file to the real destination.
+      $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null ||
+
+      # The rename failed, perhaps because mv can't rename something else
+      # to itself, or perhaps because mv is so ancient that it does not
+      # support -f.
+      {
+       # Now remove or move aside any old file at destination location.
+       # We try this two ways since rm can't unlink itself on some
+       # systems and the destination file might be busy for other
+       # reasons.  In this case, the final cleanup might fail but the new
+       # file should still install successfully.
+       {
+         test ! -f "$dst" ||
+         $doit $rmcmd -f "$dst" 2>/dev/null ||
+         { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
+           { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
+         } ||
+         { echo "$0: cannot unlink or rename $dst" >&2
+           (exit 1); exit 1
+         }
+       } &&
+
+       # Now rename the file to the real destination.
+       $doit $mvcmd "$dsttmp" "$dst"
+      }
+    fi || exit 1
+
+    trap '' 0
+  fi
+done
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
+# End:

=== added file 'gnu/teximpatient/gpg-keyring'
Binary files a/gnu/teximpatient/gpg-keyring     1970-01-01 00:00:00 +0000 and 
b/gnu/teximpatient/gpg-keyring    2013-07-02 18:52:24 +0000 differ
=== added file 'gnu/teximpatient/sha256sums'
--- a/gnu/teximpatient/sha256sums       1970-01-01 00:00:00 +0000
+++ b/gnu/teximpatient/sha256sums       2013-07-02 18:52:24 +0000
@@ -0,0 +1,3 @@
+9fb6ec5ebcc1089c12d7ef42c22f0eb7a597c70b325170ad1003cc721aef6461  
download/teximpatient-2.3.tar.gz
+608b76d735bb2ec2bcb1271644c3d5e7a428fb8d2338e114e8a48ebf91ccfd23  
download/install-sh
+d0006ebe1b8491a656bbb42b62b4e59c6c08b185502cd255c9284638025b7387  
download/teximpatient-2.3.tar.gz.sig