Re: Hydra status

[Ludovic Courtès]

address@hidden (Ludovic Courtès) skribis:

> Going to http://hydra.gnu.org/build/49569/ shows that the texlive builds
> were actually aborted.  The “Nix error output” box shows this:
>
> offloading '/gnu/store/j0b550qfqaffffc1w550v0zq2nlb0sqc-texlive-2013.drv' to 
> 'hydra.gnunet.org'...
> @ build-remote /gnu/store/j0b550qfqaffffc1w550v0zq2nlb0sqc-texlive-2013.drv 
> hydra.gnunet.org
> retrieving 2 files from 'hydra.gnunet.org'...
> Backtrace:
> In ice-9/boot-9.scm:
> 2401: 19 [save-module-excursion #<procedure 1acc980 at 
> ice-9/boot-9.scm:4045:3 ()>]
> 4050: 18 [#<procedure 1acc980 at ice-9/boot-9.scm:4045:3 ()>]
> 1724: 17 [%start-stack load-stack ...]
> 1729: 16 [#<procedure 1ad85d0 ()>]
> In unknown file:
>    ?: 15 [primitive-load "/usr/local/bin/guix"]
> In guix/ui.scm:
>  597: 14 [run-guix-command offload "x86_64-linux" "3600" "1" "72000"]
> In guix/scripts/offload.scm:
>  686: 13 [guix-offload "x86_64-linux" "3600" "1" "72000"]
> In ice-9/boot-9.scm:
>  157: 12 [catch srfi-34 ...]
> In guix/scripts/offload.scm:
>  413: 11 [transfer-and-offload # # # ...]
>  488: 10 [retrieve-files # #]
> In ice-9/boot-9.scm:
>  157: 9 [catch srfi-34 ...]
> In guix/scripts/offload.scm:
>  497: 8 [#<procedure 262b660 at guix/scripts/offload.scm:488:11 ()>]
> In guix/utils.scm:
>  240: 7 [call-with-decompressed-port xz #<closed: file 0> ...]
> In guix/nar.scm:
>  426: 6 [loop 1 ()]
>  256: 5 [restore "/gnu/store/guix-8uVCz3"]
>  256: 4 [restore "/gnu/store/guix-8uVCz3/texmf-dist"]
>  256: 3 [restore "/gnu/store/guix-8uVCz3/texmf-dist/doc"]
>  256: 2 [restore "/gnu/store/guix-8uVCz3/texmf-dist/doc/generic"]
>  248: 1 [restore 
> "/gnu/store/guix-8uVCz3/texmf-dist/doc/generic/babel-swedish"]
> In unknown file:
>    ?: 0 [mkdir "/gnu/store/guix-8uVCz3/texmf-dist/doc/generic/babel-swedish" 
> ...]
>
> ERROR: In procedure mkdir:
> ERROR: In procedure mkdir: No such file or directory
> lsh: io.c: write failed (errno = 32): Broken pipe
> lsh: channel.c: stdout: I/O error, Broken pipe
> lsh: Ignoring data on channel which is closing
> builder for `/gnu/store/j0b550qfqaffffc1w550v0zq2nlb0sqc-texlive-2013.drv' 
> failed with exit code 1
> @ hook-failed /gnu/store/j0b550qfqaffffc1w550v0zq2nlb0sqc-texlive-2013.drv - 
> 256 builder for 
> `/gnu/store/j0b550qfqaffffc1w550v0zq2nlb0sqc-texlive-2013.drv' failed with 
> exit code 1
> error: build of 
> `/gnu/store/j0b550qfqaffffc1w550v0zq2nlb0sqc-texlive-2013.drv' failed
>
> So the problem occurred while retrieving and restoring the build result
> (the log shows just these two lines because apparently, the result was
> already available on the build machine hydra.gnunet.org–which is no
> surprise given that /gnu is 1.5T on that machine, vs. 400G on
> hydra.gnu.org.)
>
> The ‘mkdir’ error here suggests that the temporary place were we are
> restoring, /gnu/store/guix-8uVCz3, has been removed right in the middle
> of the process by the GC.
>
> I believe this is fixed by 9132b9b.

Actually no (I’ve seen other occurrences of that in the meantime.)

9132b9b had a thinko, which is (hopefully!) fixed by 6071b55.  I’ve just
installed it on hydra.gnu.org.

Ludo’.