[PATCH 2/2] Add system start-up files for "guix publish".

[Hartmut Goebel]

* .gitignore: add etc/guix-publish.conf and /etc/guix-publish.service.
* etc/guix-publish.conf.in: New file.
* etc/guix-publish.service.in: New file.
* nix/local.mk (etc/guix-%.service, etc/guix-%.conf): Generalized former
  build-rules for by using patterns.
  (nodist_systemdservice_DATA): Add etc/guix-publish.service, update
  comment.
  (nodist_upstartjob_DATA): Add etc/guix-publish.conf, update comment.
* doc/guix.texi (Binary Installation): Add step for setting up "guix
  publish" to start at system start using the new files.
---
 .gitignore                  |  2 ++
 doc/guix.texi               | 34 ++++++++++++++++++++++++++++++++++
 etc/guix-publish.conf.in    | 12 ++++++++++++
 etc/guix-publish.service.in | 19 +++++++++++++++++++
 nix/local.mk                | 16 ++++++++--------
 5 files changed, 75 insertions(+), 8 deletions(-)
 create mode 100644 etc/guix-publish.conf.in
 create mode 100644 etc/guix-publish.service.in

diff --git a/.gitignore b/.gitignore
index 6e892ca..7db5e9f 100644
--- a/.gitignore
+++ b/.gitignore
@@ -50,6 +50,8 @@
 /emacs/guix-helper.scm
 /etc/guix-daemon.conf
 /etc/guix-daemon.service
+/etc/guix-publish.conf
+/etc/guix-publish.service
 /guix-daemon
 /guix-register
 /guix/config.scm
diff --git a/doc/guix.texi b/doc/guix.texi
index 92d7ee8..760639f 100644
--- a/doc/guix.texi
+++ b/doc/guix.texi
@@ -504,6 +504,40 @@ To use substitutes from @code{hydra.gnu.org} or one of its 
mirrors
 @example
 # guix archive --authorize < ~root/.guix-profile/share/guix/hydra.gnu.org.pub
 @end example
+
address@hidden
+(Optional) You may want to publish the content of your store for other
+systems in your network. For this run
address@hidden
+# guix archive --generate-key
+# useradd -U -d /var/empty -s `which nologin`    \
+           -c "Guix publish user" --system    \
+           guixpublish
address@hidden example
+
+Set @command{guix publish} to automatically start on boot.
+
+If your host distro uses the systemd init system, this can be achieved
+with these commands:
+
address@hidden
+# ln -s ~root/.guix-profile/lib/systemd/system/guix-publish.service \
+        /etc/systemd/system/
+# systemctl start guix-publish && systemctl enable guix-publish
address@hidden example
+
+If your host distro uses the Upstart init system:
+
address@hidden
+# ln -s ~root/.guix-profile/lib/upstart/system/guix-publish.conf /etc/init/
+# start guix-publish
address@hidden example
+
+Otherwise, you can still start @command{guix publish} manually with:
+
address@hidden
+# ~root/.guix-profile/bin/guix publish --user=guixpublish
address@hidden example
 @end enumerate
 
 This completes root-level install of Guix.  Each user will need to
diff --git a/etc/guix-publish.conf.in b/etc/guix-publish.conf.in
new file mode 100644
index 0000000..bf8b3f3
--- /dev/null
+++ b/etc/guix-publish.conf.in
@@ -0,0 +1,12 @@
+# This is a "job" for the Upstart init system to launch 'guix-daemon'.
+# Drop it in /etc/init to have 'guix-daemon' automatically started.
+
+description "Publish the GNU Guix store"
+
+start on runlevel [2345]
+
+stop on runlevel [016]
+
+task
+
+exec @bindir@/guix publish --user=guixpublish --port=8181
diff --git a/etc/guix-publish.service.in b/etc/guix-publish.service.in
new file mode 100644
index 0000000..bb3069c
--- /dev/null
+++ b/etc/guix-publish.service.in
@@ -0,0 +1,19 @@
+# This is a "service unit file" for the systemd init system to launch
+# 'guix publish'.  Drop it in /etc/systemd/system or similar to have
+# 'guix publish' automatically started.
+
+[Unit]
+Description=Publish the GNU Guix store
+
+[Service]
address@hidden@/guix publish --user=guixpublish --port=8181
+Environment=GUIX_LOCPATH=/root/.guix-profile/lib/locale
+RemainAfterExit=yes
+StandardOutput=syslog
+StandardError=syslog
+
+# See <https://lists.gnu.org/archive/html/guix-devel/2016-04/msg00608.html>.
+TasksMax=1024
+
+[Install]
+WantedBy=multi-user.target
diff --git a/nix/local.mk b/nix/local.mk
index c666edd..6cdcc84 100644
--- a/nix/local.mk
+++ b/nix/local.mk
@@ -180,26 +180,26 @@ endif BUILD_DAEMON_OFFLOAD
 nodist_libexec_SCRIPTS =                       \
   %D%/scripts/guix-authenticate
 
-# The '.service' file for systemd.
+# The '.service' files for systemd.
 systemdservicedir = $(libdir)/systemd/system
-nodist_systemdservice_DATA = etc/guix-daemon.service
+nodist_systemdservice_DATA = etc/guix-daemon.service etc/guix-publish.service
 
-etc/guix-daemon.service: etc/guix-daemon.service.in    \
+etc/guix-%.service: etc/guix-%.service.in      \
                         $(top_builddir)/config.status
        $(AM_V_GEN)$(MKDIR_P) "`dirname address@hidden";                        
        \
        $(SED) -e 's|@''bindir''@|$(bindir)|' <                         \
-              "$(srcdir)/etc/guix-daemon.service.in" > "address@hidden";       
\
+              "$(srcdir)/$<" > "address@hidden";       \
        mv "address@hidden" "$@"
 
-# The '.conf' job for Upstart.
+# The '.conf' jobs for Upstart.
 upstartjobdir = $(libdir)/upstart/system
-nodist_upstartjob_DATA = etc/guix-daemon.conf
+nodist_upstartjob_DATA = etc/guix-daemon.conf etc/guix-publish.conf
 
-etc/guix-daemon.conf: etc/guix-daemon.conf.in  \
+etc/guix-%.conf: etc/guix-%.conf.in    \
                         $(top_builddir)/config.status
        $(AM_V_GEN)$(MKDIR_P) "`dirname address@hidden";                        
        \
        $(SED) -e 's|@''bindir''@|$(bindir)|' <                         \
-              "$(srcdir)/etc/guix-daemon.conf.in" > "address@hidden";          
\
+              "$(srcdir)/$<" > "address@hidden";               \
        mv "address@hidden" "$@"
 
 EXTRA_DIST +=                                  \
-- 
2.7.4