[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [GWhere-discussion] problems with special characters (umlaute)
From: |
Max Schattauer |
Subject: |
Re: [GWhere-discussion] problems with special characters (umlaute) |
Date: |
Fri, 1 Sep 2006 11:06:35 +0200 |
On Fri, 01 Sep 2006 00:04:05 +0200
Zero <address@hidden> wrote:
> Hi Max and list,
>
> Can you send me the content of your /etc/fstab and /etc/mtab please ?
> I know that GWhere encounters problem with files system which are
> mounted with special encoding... :-/
>
i noticed this problem especially using cdrom/dvd-media, can't remember if i
encountered it on reiser filesystems
cat /etc/fstab
# /etc/fstab: static file system information.
# $Header: /home/cvsroot/gentoo-src/rc-scripts/etc/fstab,v 1.14 2003/10/13
20:03 :38 azarah
Exp $
#
# noatime turns off atimes for increased performance (atimes normally aren't
# needed; notail increases performance of ReiserFS (at the expense of storage
# efficiency). It's safe to drop the noatime options if you want and to
# switch between notail and tail freely.
# <fs> <mountpoint> <type> <opts>
<dump/pa ss>
# NOTE: If your BOOT partition is ReiserFS, add the notail option to opts.
/dev/hda2 / reiser4 noatime 0 0
/dev/hda1 none swap sw,loop=/dev/loop0,encryption=AES128 0 0
/dev/sda1 /mnt/sda1 vfat rw,noauto 0 0
/dev/hda3 /home reiser4
noauto,defaults,loop=/dev/loop1,encryption=AES256,gpgkey=/mnt/cdrom/hdb1.gpg 0 0
/dev/cdrom /mnt/cdrom iso9660 noauto,ro,users 0 0
/dev/cdrom1 /mnt/cdrom1 iso9660 noauto,ro,users 0 0
/dev/fd0 /mnt/fd0 auto noauto,users 0 0
/dev/hdb1 /mnt/tmp reiserfs
defaults,noauto,loop=/dev/loop2,encryption=AES256,gpgkey=/mnt/cdrom/hdb1.gpg 0 0
# NOTE: The next line is critical for boot!
none /proc proc defaults 0 0
# glibc 2.2 and above expects tmpfs to be mounted at /dev/shm for
# POSIX shared memory (shm_open, shm_unlink).
# (tmpfs is a dynamically expandable/shrinkable ramdisk, and will
# use almost no memory if not populated with files)
# Adding the following line to /etc/fstab should take care of this:
none /dev/shm tmpfs defaults 0 0
cat /etc/mtab
/dev/hda2 / reiser4 rw,noatime 0 0
proc /proc proc rw 0 0
sysfs /sys sysfs rw,nosuid,nodev,noexec 0 0
udev /dev tmpfs rw,nosuid 0 0
devpts /dev/pts devpts rw,nosuid,noexec 0 0
none /dev/shm tmpfs rw 0 0
usbfs /proc/bus/usb usbfs rw,noexec,nosuid,devmode=0664,devgid=85 0 0
/dev/hda3 /home reiser4
rw,loop=/dev/loop1,gpgkey=/mnt/cdrom/hdb1.gpg,encryption=AES256 0 0
/dev/hdc /mnt/cdrom iso9660 ro,noexec,nosuid,nodev 0
Best regards,
Max.
- Re: [GWhere-discussion] problems with special characters (umlaute),
Max Schattauer <=