[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Problems compiling 2.0a15 on IRIX 6.5.13
|
From: |
Rune Mossige |
|
Subject: |
Re: Problems compiling 2.0a15 on IRIX 6.5.13 |
|
Date: |
Thu, 6 Dec 2001 15:47:43 +0100 |
|
User-agent: |
Mutt/1.2.5i |
Thanks for the help.
I downloaded the file, and tried to run it:
./cfagent -v
37301:./cfagent: rld: Fatal Error: Cannot Successfully map soname
'libdb-3.3.so' under any of the filenames
/usr/lib32/libdb-3.3.so:/usr/lib32/internal/libdb-3.3.so:/lib32/libdb-3.3.so:/opt/lib32/libdb-3.3.so:
I then created symlinks into /usr/lib pointint to where I installed
the DB3 (/usr/freeware/lib32), and then it ran OK. I will give it a go,
and see how it go.
Again, thanks for the help.
On (06/12/01 14:21), Bas van der Vlies wrote:
> X-Mailer: XFMail 1.4.4 on Solaris
> X-Priority: 3 (Normal)
> Content-Transfer-Encoding: 8bit
> Date: Thu, 06 Dec 2001 14:21:01 +0100 (MET)
> Reply-To: basv@sara.nl
> Organization: SARA
> Sender: basv@sara.nl
> From: Bas van der Vlies <basv@sara.nl>
> To: Rune Mossige <runemo@stavanger.geco-prakla.slb.com>
> Subject: RE: Problems compiling 2.0a15 on IRIX 6.5.13
> Cc: help-cfengine@gnu.org
>
> Rune,
>
> I have just compiled this version with gcc 2.95 no problems, but
> gethostbyname still goes wrong. I have also compiled it with
> the native SGI compiler and also no problem. You can fetch it
> from:
> ftp.sara.nl://pub/SARA/outgoing/cfengine-irix-2.0a15.tar.gz
>
> NO Warranties and it is compiled on 6.5.13!!
>
> Regards
>
> On 06-Dec-2001 Rune Mossige wrote:
> > Hello,
> > I have soem O2's and Octanes running IRIX 6.5.13, and I would like
> > to compile cfengine-2.0a15 on those machines.
> >
> > I have installed gcc 3.0 on them.
> >
> > In the past (cfengine 1.6.3) I know that gcc did not work on IRIX,
> > because gethostbyname (I think) returned the wrong thing (I think
> > it was localhost). Is this fixed in gcc3?
> >
> > Anyway, when I try to compile on an O2, I get:
> >
> >
> > GSTESW 14# make
> > Making all in pub
> > source='getopt.c' object='getopt.o' libtool=no \
> > depfile='.deps/getopt.Po' tmpdepfile='.deps/getopt.TPo' \
> > depmode=gcc3 /bin/sh ../depcomp \
> > gcc -DHAVE_CONFIG_H -I. -I. -I../src -g -O2 -w -c `test -f
> > getopt.c || echo './'`getopt.c
> > source='getopt1.c' object='getopt1.o' libtool=no \
> > depfile='.deps/getopt1.Po' tmpdepfile='.deps/getopt1.TPo' \
> > depmode=gcc3 /bin/sh ../depcomp \
> > gcc -DHAVE_CONFIG_H -I. -I. -I../src -g -O2 -w -c `test -f
> > getopt1.c || echo './'`getopt1.c
> > source='full-write.c' object='full-write.o' libtool=no \
> > depfile='.deps/full-write.Po' tmpdepfile='.deps/full-write.TPo' \
> > depmode=gcc3 /bin/sh ../depcomp \
> > gcc -DHAVE_CONFIG_H -I. -I. -I../src -g -O2 -w -c `test -f
> > full-write.c || echo './'`full-write.c
> > source='regex.c' object='regex.o' libtool=no \
> > depfile='.deps/regex.Po' tmpdepfile='.deps/regex.TPo' \
> > depmode=gcc3 /bin/sh ../depcomp \
> > gcc -DHAVE_CONFIG_H -I. -I. -I../src -g -O2 -w -c `test -f
> > regex.c || echo './'`regex.c
> > source='md5.c' object='md5.o' libtool=no \
> > depfile='.deps/md5.Po' tmpdepfile='.deps/md5.TPo' \
> > depmode=gcc3 /bin/sh ../depcomp \
> > gcc -DHAVE_CONFIG_H -I. -I. -I../src -g -O2 -w -c `test -f
> > md5.c
> >|| echo './'`md5.c
> > source='md5c.c' object='md5c.o' libtool=no \
> > depfile='.deps/md5c.Po' tmpdepfile='.deps/md5c.TPo' \
> > depmode=gcc3 /bin/sh ../depcomp \
> > gcc -DHAVE_CONFIG_H -I. -I. -I../src -g -O2 -w -c `test -f
> > md5c.c || echo './'`md5c.c
> > source='snprintf.c' object='snprintf.o' libtool=no \
> > depfile='.deps/snprintf.Po' tmpdepfile='.deps/snprintf.TPo' \
> > depmode=gcc3 /bin/sh ../depcomp \
> > gcc -DHAVE_CONFIG_H -I. -I. -I../src -g -O2 -w -c `test -f
> > snprintf.c || echo './'`snprintf.c
> > snprintf.c: In function `vsnprintf':
> > snprintf.c:622: parse error before "int"
> > snprintf.c:622: parse error before "int"
> > snprintf.c:622: parse error before "int"
> > snprintf.c:622: parse error before "int"
> > snprintf.c:622: parse error before "int"
> > snprintf.c:622: parse error before ')' token
> > snprintf.c:636: parse error before "int"
> > snprintf.c:636: parse error before "int"
> > snprintf.c:636: parse error before "int"
> > snprintf.c:636: parse error before "int"
> > snprintf.c:636: parse error before "int"
> > snprintf.c:636: parse error before ')' token
> > snprintf.c:694: parse error before "int"
> > snprintf.c:694: parse error before "int"
> > snprintf.c:694: parse error before "int"
> > snprintf.c:694: parse error before "int"
> > snprintf.c:694: parse error before "int"
> > snprintf.c:694: parse error before ')' token
> > snprintf.c:700: parse error before "const"
> > snprintf.c:700: parse error before "const"
> > snprintf.c:700: parse error before "const"
> > snprintf.c:700: parse error before "const"
> > snprintf.c:700: parse error before "const"
> > snprintf.c:700: parse error before ')' token
> > snprintf.c:759: parse error before "void"
> > snprintf.c:759: parse error before "void"
> > snprintf.c:759: parse error before "void"
> > snprintf.c:759: parse error before "void"
> > snprintf.c:759: parse error before "void"
> > snprintf.c:759: parse error before ')' token
> > snprintf.c:770: parse error before "int"
> > snprintf.c:770: parse error before "int"
> > snprintf.c:770: parse error before "int"
> > snprintf.c:770: parse error before "int"
> > snprintf.c:770: parse error before "int"
> > snprintf.c:770: parse error before ')' token
> > snprintf.c:775: parse error before "long"
> > snprintf.c:775: parse error before "long"
> > snprintf.c:775: parse error before "long"
> > snprintf.c:775: parse error before "long"
> > snprintf.c:775: parse error before "long"
> > snprintf.c:775: parse error before ')' token
> > snprintf.c:791: parse error before "unsigned"
> > snprintf.c:791: parse error before "unsigned"
> > snprintf.c:791: parse error before "unsigned"
> > snprintf.c:791: parse error before "unsigned"
> > snprintf.c:791: parse error before "unsigned"
> > snprintf.c:791: parse error before ')' token
> > snprintf.c:795: parse error before "unsigned"
> > snprintf.c:795: parse error before "unsigned"
> > snprintf.c:795: parse error before "unsigned"
> > snprintf.c:795: parse error before "unsigned"
> > snprintf.c:795: parse error before "unsigned"
> > snprintf.c:795: parse error before ')' token
> > *** Error code 1 (bu21)
> > *** Error code 1 (bu21)
> > GSTESW 15#
> >
> >
> > Is there anyone who knows how to fix this, or alternatively,
> > have a pre-compiled cfengine-2.0a15 binary distribution for
> > IRIX 6.5.13? I do not have the SGI compiler, so I am a bit lost...
> > --
> > -------------------------------------------------------------------
> > (-: Hiroshima 45, Chernobyl 86, Windows 95 :-)
> > Our ultimate goal is to make overloaded systems appear to be idle.
> > High performance, High reliability, Low cost -------- Pick any two.
> > -------------------------------------------------------------------
> > Rune Mossige, Systems Support Engineer, WesternGeco, Stavanger
> > Tel: (+47)51946869 Mobile:(+47)90871024
> >
> > _______________________________________________
> > Help-cfengine mailing list
> > Help-cfengine@gnu.org
> > http://mail.gnu.org/mailman/listinfo/help-cfengine
>
> --
> ********************************************************************
> * *
> * Bas van der Vlies e-mail: basv@sara.nl *
> * SARA - Academic Computing Services phone: +31 20 592 8012 *
> * Kruislaan 415 fax: +31 20 6683167 *
> * 1098 SJ Amsterdam WWW: www.sara.nl *
> * *
> ********************************************************************
>
--
-------------------------------------------------------------------
(-: Hiroshima 45, Chernobyl 86, Windows 95 :-)
Our ultimate goal is to make overloaded systems appear to be idle.
High performance, High reliability, Low cost -------- Pick any two.
-------------------------------------------------------------------
Rune Mossige, Systems Support Engineer, WesternGeco, Stavanger
Tel: (+47)51946869 Mobile:(+47)90871024