[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
works in 2.0.8p1, doesn't work in 2.1.0b4/5
From: |
Kurt Lieber |
Subject: |
works in 2.0.8p1, doesn't work in 2.1.0b4/5 |
Date: |
Sun, 12 Oct 2003 10:57:15 -0400 |
User-agent: |
Mutt/1.5.4i |
After upgrading to 2.1.0b4 (and subsequently b5) pretty much everything
outside of updating cf configuration files themselves stopped functioning.
I had the following very basic copy command in my main cfagent.conf file:
copy:
all::
$(master_files)/etc/ntp.conf.default dest=/etc/ntp.conf
define=_ntp_bounce
type=checksum
syslog=true
server=$(gold)
force=true
And it did not work. (I mv'd the existing /etc/ntp.conf file out of the
way before running cfagent and yes, things like $(gold) and $(master_files)
are properly defined elsewhere in the conf file)
Running 'cfagent -v' along with 'cfservd -d2' showed that the copy command
was getting picked up, but nothing was being done with it. Where I would
normally expect to see something like:
*********************************************************************
Main Tree Sched: copy pass 1 @ Sun Oct 12 14:51:22 2003
*********************************************************************
Checking copy from gold:/var/cfengine/repository/files/etc/ntp.conf.default to
/etc/ntp.conf
Connect to gold = 10.1.1.1 on port cfengine
Loaded /var/cfengine/ppkeys/root-10.1.1.1.pub
cfengine:client: Strong authentication of server=gold connection confirmed
cfengine:client: Update of image /etc/ntp.conf from master
/var/cfengine/repository/files/etc/ntp.conf.default on gold
cfengine:client: /etc/ntp.conf had permission 600, changed it to 644
Saving the setuid log in /var/cfengine/cfagent.client.log
Job start time set to Sun Oct 12 14:51:22 2003
I instead saw:
*********************************************************************
Main Tree Sched: copy pass 1 @ Sun Oct 12 14:51:22 2003
*********************************************************************
Saving the setuid log in /var/cfengine/cfagent.client.log
Job start time set to Sun Oct 12 14:51:22 2003
Additionally, custom actionsequence classes I had defined to do things like
check/change file permissions stopped working as well, with log entries
similar to the one above.
Making no other changes to the config files, I downgraded to 2.0.8p1 and
things started working again.
Are there major differences in the configuration syntax between 2.0 and 2.1
or is there a problem elsewhere?
I'm happy to provide further details, including full configuration files,
off list.
--kurt
pgp5PKpnlMltb.pgp
Description: PGP signature
- works in 2.0.8p1, doesn't work in 2.1.0b4/5,
Kurt Lieber <=